Achieving fair service with a hybrid scheduling scheme for CICQ switches

Providing performance guarantees for arriving traffic flows has become an important measure for today’s routing and switching systems. However, none of current scheduling algorithms built on CICQ (combined input and cross-point buffered) switches can provide flow level performance guarantees. Aiming at meeting this requirement, the feasibility of implementing flow level scheduling is discussed thoroughly. Then, based on the discussion, it comes up with a hybrid and stratified fair scheduling (HSFS) scheme, which is hierarchical and hybrid, for CICQ switches. With HSFS, each input port and output port can schedule variable length packets independently with a complexity of O(1). Theoretical analysis show that HSFS can provide delay bound, service rate and fair performance guarantees without speedup. Finally, we implement HSFS in SPES (switch performance evaluation system) to verify the analytical results.     

影响ETM影像土地利用/覆盖分类精度因素的研究

训练样本量、辅助数据和分类法是影响土地利用/覆盖分类精度的3个主要因素,通过找到这3个因素的最佳组合方式以提高分类精度,分别在25%、50%、75%、100%样本量下,加入NDVI、DEM和纹理均值特征作为辅助数据,比较了分类回归树、支持向量机、最大似然法3种分类法的效果,探讨了训练样本、辅助数据以及分类技术对土地利用/覆盖分类精度的影响。结果表明：支持向量机总体分类精度较高,在相同样本量和没有有效辅助数据的情况下,SVM可以获得最佳的分类结果,总体分类精度在85%以上;在进行分类时,加入NDVI和纹理均值特征使分类回归树分类精度提高了2.82%,说明该方法对有效辅助数据的加入较为敏感;在获取的训练样本集有限而可获取有效的辅助数据时,应优先考虑利用分类回归树进行土地利用/覆盖分类。     

基于时序特征的黄河三角洲土地覆盖动态及驱动力分析

综合不同土地利用类型的Landsat影像时序特征和面向对象分割方法,分析1985-2018年现代黄河三角洲土地覆盖时空特征,探讨土地覆盖变化的驱动机制。结果表明:1985-2018年间研究区天然湿地面积大幅减少,共减少9.9847×104 hm²,其中沼泽和草甸湿地面积减少尤为明显,而人工湿地面积则逐年增加,年平均增加率达54.66%,主要是盐田养殖场和水稻种植面积的增大;社会经济因素对研究区土地覆盖的影响程度高于水文因素;输沙量是影响研究区土地覆盖变化的主要水文因素,实测径流量的减少进一步导致天然湿地向旱地类型转化;人口和GDP变化对人工湿地面积增加的正相关作用比较显著,而天然湿地面积的减少则与该两个指标的负相关关系比较明显。     

DETECTOR: A knowledge-based system for injection molding diagnostics

A knowledge-based system (KBS) for diagnosis of multiple defects in injection molding is presented. The general scheme for knowledge representation based on fuzzy set theory has been shown useful in representing inexact and incomplete information for developing the KBS. An optimality criterion is created for selecting a simple and best cover to explain the given problem. An efficient search algorithm for finding such cover is also discussed.     

基于OSEK规范的网络管理的研究与改进

首先论述了基于OSEK规范的网络管理特点并对OSEK网络管理的工作机制进行了详细分析;在基于OSEK网络管理特点和工作机制的基础上,对OSEK网络管理在以太网上的扩展、资源占有率优化和实时性提高几个方面给出了解决方案。     

Research and Applications of Semi-solid Processing

Since it was pioneered by Flemings and otherresearchers [11, the semi-solid metal processingtechnique has been widely stUdied in the world.Especially in the past decade, SSM as a newproduct forming technique has been rapidly developed and put into commercial applications[2, 31. In recent years, with the development ofthe ado-industry of China, a lot of researchwork on SSM has been done, including the preparation of slumes, reheating and thixoforming[Al6]; moreover, great achievements have …     

汽车覆盖件冲模的消失模铸造技术

消失模铸造生产冲模毛坯具有许多的优点，其工艺设计、涂料的性能等不同于普通砂型铸造。冲模铸件材料可依据模具的工作环境选择不同铸铁。结合生产实际介绍了消失模铸造的一些技术要点，并分析了常见的铸件缺陷。     

驱动外壳铸件产生裂纹的原因及消除方法

通过对两种形状相似驱动外壳的工艺改进，解决了裂纹缺陷，取得了明显的经济效益。     

硅黄铜铸件的渗漏缺陷分析

为了满足耐海水腐蚀、高导热率和承压能力要求,冷却器盖均采用硅黄铜制造。某厂在冷却器盖的生产过程中,铸件废品率高达60%,主要问题是铸件在水压测试中出现渗漏。分析了冷却器盖铸件的渗漏缺陷。结果表明:硅的加入量和浇注温度偏高,硅熔化不完全是导致此类铸件产生渗漏的主要原因。针对性地采取措施后,冷却器盖铸件的成品率大幅提高,达到了90%以上。     

PVC基阻尼涂料的制备及其流变性能

以聚氯乙烯（PVC）为基体，对苯二甲酸二辛酯（DOTP）为增塑剂，与无机填料CaCO3、钙锌热稳定剂、乳化剂OP-10、润滑剂液体石蜡等复合改性制备PVC基阻尼材料，采用动态流变仪DHR、动态热机械分析仪DMA、扫描电镜SEM等对试样的性能和形态进行表征。运用正交设计探究各组分对性能的影响规律，结果表明，填料CaCO3和增塑剂DOTP比例对其阻尼性能影响最显著；当PVC: CaCO3: DOTP: OP-10比重为45: 33: 22: 2时，25℃时频率0.01～150 Hz范围内，tan δ最大值从0.497提高到0.604；剪切速率0.1 s-1时表观黏度为3738 Pa·s，剪切速率150 s-1时表观黏度为2.19 Pa·s，具有优异的抗流挂性与稳定性。通过LASD形态分析构建微观聚集态模型，提出刚性填料团聚-解团聚和聚合物微球变形对流变性能的作用机理，为LASD的持续研究提供技术思路和理论基础。