Crystallization of Sol–Gel-Derived Barium Strontium Titanate Thin Films

Microstructural development of thin-film barium strontium titanate (Ba _x Sr_{1– x} TiO₃) as a function of strontium concentration and thermal treatment were studied, using transmission electron microscopy (TEM) and X-ray diffractometry (XRD). Thin films, ∼250 nm thick, were spin-coated onto Pt/Ti/SiO₂/Si substrates, using methoxypropoxide alkoxide precursors, and crystallized by heat-treating at 700°C. All films had the cubic perovskite structure, and their lattice parameters varied linearly with strontium content. Films with higher strontium concentrations had a larger average grain size. In situ TEM heating experiments, combined with differential thermal analysis/thermogravimetric analysis results, suggest that the gel films crystallize as an intermediate carbonate phase, Ba _x Sr_{1– x} TiO₂CO₃ (with a solid solution range from x = 1 to x = 0). Before decomposition at 600°C, this carbonate phase inhibits the formation of the desired perovskite phase.     

用椰壳制活性炭吸附去除三价铋离子(英文)

In present study,we report the preparation of coconut shell activated carbon as adsorbent and its appli-cation for Bi(Ⅲ) removal from aqueous solutions.The developed adsorbent was characterized with scanning elec-tron microscope(SEM),Fourier Transform Infrared(FTIR),C,H,N,S analyzer,and BET surface area analyzer.The parameters examined include agitation time,initial concentration of Bi(Ⅲ),adsorbent dose and temperature.The maximum adsorption of Bi(Ⅲ)(98.72%) was observed at 250 mg·L-1 of Bi(Ⅲ) and adsorbent dose of 0.7 g when agitation was at 160 r·min-1 for 240 min at(299±2) K.The thermodynamic parameters such as Gibb’s free energy(△Gθ),enthalpy(△Hθ) and entropy(△Sθ) were evaluated.For the isotherm models applied to adsorption study,the Langmuir isotherm model fits better than the Freundlich isotherm.The maximum adsorption capacity from the Langmuir isotherm was 54.35 mg?g?1 of Bi(Ⅲ).The kinetic study of the adsorption shows that the pseudo second order model is more appropriate than the pseudo first order model.The result shows that,coconut shell ac-tivated carbon is an effective adsorbent to remove Bi(Ⅲ) from aqueous solutions with good adsorption capacity.     

High energy-storage density under low electric fields and improved optical transparency in novel sodium bismuth titanate-based lead-free ceramics

A novel (1-x)Na_0.5Bi_0.5TiO₃-xBaHfO₃ (abbreviated as (1-x)NBT-xBH) transparent ceramic was fabricated by the solid state reaction method. X-ray diffraction analysis showed that NBT-based transparent ceramics exhibit a cubic-like perovskite structure and the solid solubility of BH in NBT reached to 0.15. The Landau-Devonshire theory and I-E curves revealed that the transition between the antiferroelectric like phase and the ferroelectric phase deeply relies on the variation of composition and free energy. One sample (x = 0.15) was found to show a high dielectric constant (˜2418±10%) over the temperature range 57–400 °C. These ceramics also exhibited a high discharge energy density (W_d) of 2.1 J/cm³ and a high maximum polarization P_m of 34 μC/cm² under relatively low electric fields which were less than 175 kV/cm. There was also high transparency in the visible spectra (more than 0.5) when the sample thickness was 250 μm.     

P2O5对Bi2O3-B2O3-ZnO体系玻璃结构及热性能的影响

采用传统的熔融冷却的方法制备了(40-x)Bi2O3-30B2O3-30ZnO-xP2O5(0≤x≤15mo1％)体系玻璃.使用红外光谱、拉曼光谱、DSC和热膨胀仪研究了封接玻璃的结构和热性能.红外光谱及拉曼光谱结果表明,P2O5作为网络形成体,以[PO4]进入到玻璃的网络结构中,玻璃的网络结构性增强.玻璃结构中[BO3]三角体结构单元相对含量有增多趋势,[BO4]四面体、[BiO3]三角体、[BiO6]八面体结构单元相对含量减少.随着P2 O5含量的增加,玻璃化转变温度和玻璃的初始析晶温度升高;玻璃的密度减小.Bi2O3-B2O3-ZnO-P2O5体系封接玻璃热膨胀系数减小,从8.289×10-6℃-1减小到6.354×10-6℃-1.玻璃的软化点逐渐增大,从416℃升高到524℃.     

Crystallization kinetics and enhanced Bi NIR luminescence of transparent silicate glass‐ceramics containing Sr2YbF7 nanocrystals

Bismuth‐doped glasses and crystals have been widely investigated due to their intriguing potential applications in superbroadband fiber amplifier and lasers in new NIR spectral range. However, few reports have been devoted so far to bismuth‐doped transparent glass‐ceramics. Here, this work reports on bismuth‐doped silicate glasses and glass‐ceramics, which were prepared by melt‐quenching and consequent annealing processes, respectively. On the basis of the analyses on crystallization kinetics, nucleation and growth rate of crystalline phase can be modulated and Sr₂YbF₇ nanophase can, therefore, be precipitated uniformly inside the glass matrix in a controlled way to maintain proper transparence especially in optical telecommunication windows. Once the nanophase comes into being, enhanced bismuth NIR luminescence can be observed by more than 40 times upon excitation of 470 nm. Similar enhancement can appear upon different excitation schemes and the mechanism is discussed accordingly. Such Bi doped transparent glass‐ceramics with improved luminescence efficiency might find application in fiber lasers for future optical fiber communication.     

Large Piezoelectricity and Ferroelectricity in Mn‐Doped (Bi0.5Na0.5)TiO3‐BaTiO3 Thin Film Prepared by Pulsed Laser Deposition

Mn‐doped (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (MnBNBT) thin films were prepared on SrRuO₃ (SRO)‐coated (001) SrTiO₃ (STO) single crystal substrates by pulsed laser deposition under different processing conditions. Structural characterization (i.e., XRD and TEM) confirms the epitaxial growth of STO/SRO/MnBNBT heterostructures. Through the judicious control of deposition temperature, the defect level within the films can be finely tuned. The MnBNBT thin film deposited at the optimized temperature exhibits superior ferroelectric and piezoelectric responses with remanent polarization P_r of 33.0 μC/cm² and piezoelectric coefficient d₃₃ of 120.0 ± 20 pm/V.     

Impedance spectroscopy of bismuth sodium titanate: Barium titanate ceramics with manganese doping

In this work we use Impedance Spectroscopy (IS) to study lead‐free ceramics of perovskite structure (Bi_1/2Na_1/2TiO₃)_0.925(BaTiO₃)_0.075 with Mn doping of 0, 0.2, 1.0, and 2.0 at.%. We compare our IS results with permittivity results, using dielectric to resistivity transformation equations which allow us to display results either as permittivity or as resistivity. We observe ionic conductivity dominating at lower temperatures, giving way to electronic conductivity at higher temperatures. The permittivity shows deviations from Curie‐Weiss behavior characteristic of relaxor ferroelectrics. The 0.2% Mn samples show the highest ionic resistivity, which will reduce heating for high voltage piezoelectric applications. They also have the highest Curie‐Weiss temperature and Burns temperature.     

The origin of the heterogeneous distribution of bismuth in aluminosilicate laser glasses

As one kind of novel and burgeoning laser materials, bismuth‐doped silicate glasses have aroused increasing attention for the super broadband near‐infrared (NIR) emission. However, the large optical scattering loss, resulting from optical heterogeneity in glass color and refractive index, limits their further applications in telecommunication system. Thus, it is urgent to uncover the essence of heterogeneity in Bi‐doped silicate glasses and subsequently improve glass optical performance. It will give us some hint to homogenize the glass component and Bi active centers so as to boost the development of Bi‐based glass materials. Here, taking 1 typical Bi‐doped calcium aluminosilicate glass as an example, we revealed the origin of the optical heterogeneities in glass color and refractive index through the NIR emission spectra, electron probe microanalyzer (EPMA) of elements and X‐ray photoelectron spectroscopy (XPS) of Bi 4f_5/2, Bi 4f_7/2, and Al 2p. The inhomogeneous distribution of Bi and aluminum components is responsible for the heterogeneity in this glass system. In addition, we found that tetrahedral coordinated aluminum favors the existence of Bi NIR centers, consequently resulting in enhanced Bi NIR emissions. Furthermore, based on our results and the role of Al³⁺ in glass network, we demonstrate the homogenizing of glass component by finely tuning glass composition. This work will enrich the understanding of Bi‐doped laser glass and provide a guideline for the design of component‐derived Bi‐doped silicate glasses and fibers with efficient NIR emission and high optical quality.     

BiVO4的液相燃烧法制备及可见光下光催化性能研究

采用液相燃烧法合成了单斜晶相的BiVO4,并利用XRD,UV-Vis DRS等方法对BiVO4的结构进行了表征。研究了BiVO4在可见光下光催化降解亚甲基蓝的性能,结果表明光照4 h内,亚甲基蓝的降解效率高达94.2%。     

掺杂三氧化二锑的钛酸铋钠钾陶瓷的显微结构和电学性能

采用固相合成工艺制备了（1–x）[0.82Bi0.5Na0.5TiO3–0.18Bi0.5K0.5TiO3]–xSb2O3（BNKT–xSb）压电陶瓷,研究了Sb2O3掺杂对BNKT陶瓷的显微结构和电学性能的影响规律。研究表明：Sb2O3掺杂量x小于0.020时,不改变基体的钙钛矿结构,且Sb具有可变化合价,能形成＂施主＂和＂受主＂2种掺杂而起到＂软化＂或＂硬化＂的作用。当Sb2O3掺杂量x≤0.005时,其压电系数d33随Sb2O3掺杂量的增加而增大,此时Sb2O3表现出了＂软化＂的特征;当Sb2O3掺杂量x〉0.005时,d33降低,从而又表现出了＂硬化＂的特性;当Sb2O3掺杂≥0.010时,诱使陶瓷室温下反铁电微畴的形成,导致铁电性和压电性的骤减。