34CrMoV结构钢动态再结晶行为研究

应用Gleeble-1500热模拟实验机进行等温压缩试验,研究了变形工艺参数对34CrMoV结构钢动态再结晶行为的影响.结果表明,其流变应力随变形温度升高而降低,随应变速率提高而增大;随着应变速率的降低,应变量的增加和变形温度的升高,动态再结晶速度加快且奥氏体晶粒得到细化.     

基于模糊匹配的平面连杆机构反求设计研究

对平面连杆机构曲线进行了分析,提出了用一组特征参数来描述连杆曲线,建立了连杆曲线图谱库,并将模糊论应用于连杆机构的曲线匹配,从而获取所求的机构参数.最后给出了应用实例,证实了该方法的可行性与有效性.     

Nonlinear black-box modeling in system identification: a unified overview

A nonlinear black-box structure for a dynamical system is a model structure that is prepared to describe virtually any nonlinear dynamics. There has been considerable recent interest in this area, with structures based on neural networks, radial basis networks, wavelet networks and hinging hyperplanes, as well as wavelet-transform-based methods and models based on fuzzy sets and fuzzy rules. This paper describes all these approaches in a common framework, from a user's perspective. It focuses on what are the common features in the different approaches, the choices that have to be made and what considerations are relevant for a successful system-identification application of these techniques. It is pointed out that the nonlinear structures can be seen as a concatenation of a mapping form observed data to a regression vector and a nonlinear mapping from the regressor space to the output space. These mappings are discussed separately. The latter mapping is usually formed as a basis function expansion. The basis functions are typically formed from one simple scalar function, which is modified in terms of scale and location. The expansion from the scalar argument to the regressor space is achieved by a radial- or a ridge-type approach. Basic techniques for estimating the parameters in the structures are criterion minimization, as well as two-step procedures, where first the relevant basis functions are determined, using data, and then a linear least-squares step to determine the coordinates of the function approximation. A particular problem is to deal with the large number of potentially necessary parameters. This is handled by making the number of ‘used’ parameters considerably less than the number of ‘offered’ parameters, by regularization, shrinking, pruning or regressor selection.     

圆柱形螺旋弹簧的简捷计算

将圆柱形螺旋弹簧设计中的部分常用公式组合成一组仅与弹簧指数Ｃ有关的公式，并将Ｃ＝４～１４代入计算而获得一套参数表，由此，可提高圆柱形螺旋弹簧的设计效率。     

衡山客运索道工程鞍座的设计

对衡山索道工程中双承载,双牵引鞍座在上、下站房及线路上的配置和主要技术参数、结构进行了较详细的叙述与分析。     

220t/h高压蒸汽锅炉过热器的吊装技术

220t/h高温高压蒸汽锅炉过热器为大体积，大吨位，且锅炉工程与土建安装施工处于交叉作用状态，场地又狭窄，基于上述原因，提出了分部倒钩吊装方法，介绍了该方案的实施过程，对过热器的扳倒，倒钩，吊装的每道工序均进行了阐述，在不增加成本的前提下，安装，可靠，高效地完成吊装任务。     

Advanced Coatings on Furnace Wall Tubes

Nickel-based self-fluxing alloy coating extends the service life of furnace wall tubes at waste incineration plants due to its excellent corrosion resistance and heat resistance. Fusing of such coatings by induction heating offers improved efficiency and reliability of products. Compared with conventional plasma, flame, and high-velocity oxy-fuel spraying thermal-sprayed coatings, induction-fused coatings provide a far stronger metallurgical bond at the interface, while minimizing the inclusion of pores. In addition, the tubes are less costly than those with welded coatings, and the process reduces the distortion of the products, facilitating easier final assembly. A successful experimental application of 11 units in a waste incinerator revealed virtually no corrosion on the exposed surfaces, and showed an improved water heating efficiency over that of the original tubes. Such units are now being employed in four incinerators in Taiwan, and continuing tests are showing great promise.     

八里庄钢筋混凝土桥控爆拆除

文中介绍在周期建筑，电力、电信等设计密集的环境中，爆破一座结构坚固的大型钢筋混凝土桥梁和桥台浆砌块石的爆破参数设计，局部部位技术处理措施以及孔内孔外延时相结合的非电起爆网路。     

基于多模型半参数非线性回归模型的外弹道节省参数估计

双星定位系统的应用是外弹道估计中的一种发展趋势。文章给出基于双星、光雷的联合测量模型,建立基于半参数回归的外弹道节省参数估计模型;给出基于半参数回归的外弹道节省参数估计算法及计算步骤,并从理论上分析了基于半参数回归的外弹道节省参数估计算法能有效地消除非线性因素对参数估计性能的影响,其估计精度优于经典的节省参数建模方法,并通过仿真得到：该算法确实有效。     

大型立式玻璃磨边机整机动态特性分析

大型立式玻璃磨边机的动态特性影响玻璃磨边质量和磨边效率。利用Solidworks软件建立某大型立式玻璃磨边机三维实体模型,导入ANSYS软件中,对整机结构有限元动力学分析,得到该磨边机前六阶模态参数,分析了各阶振型对磨边机动态特性的影响,为磨边机结构的改进设计提供了理论依据。