CJ91胶粘剂在螺旋振动光整机中的应用

螺旋振动光整机槽内壁的橡皮保护层由于老化及磨损等原因出现裂口甚至脱落现象，严重影响设备的使用寿命和闸把壳体的外观质量。通过分析和试验筛选出螺旋振动光整机的理想胶粘荆——CJ91胶粘剂并介绍了粘接修补工艺。     

Melt‐processable rubber: Chlorinated waste tire rubber‐filled polyvinyl chloride

Chlorinated ground rubber tire (Cl‐GRT) particles were used as filler in a plasticized polyvinylchloride (PVC) to develop a melt‐processable rubber composition. Physical properties of the Cl‐GRT‐filled PVC compound showed improvement compared to the nonchlorinated counterpart. Interaction between Cl‐GRT and PVC was examined on the basis of results of stress relaxation, dynamic mechanical thermal analysis, and solvent swelling studies. The Cl‐GRT could be loaded upto 40 parts per hundred parts of PVC, and the composition still retains the elastomeric characteristics. The Cl‐GRT‐filled composite was found to be reprocessable like the unfilled PVC compound. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 622–631, 2002; DOI 10.1002/app.10352     

混炼硅橡胶的配合技术(八)

介绍了2种汽车部件（密封图、汽车挡风玻璃刮片）装配用混炼硅橡胶的配制，以及硫化过程中能与接触基材粘接的混炼硅橡胶（通过添加各种增粘剂如含乙烯烃碳酸酯基或巯基乙酸酯基化合物、烷氧基硅烷、含乙烯基硅官能基过氧化物为硫化剂）的配制。     

符号几何规划问题的求解新方法

对符号几何规划问题,给出一种求其全局最优解的分支定界算法。利用不同的凸化方法将算法中关键的定下界操作转化为易于求解的凸规划问题。最后给出算法的收敛性证明和数值实验结果。     

系统失效的分支-界限分析法及其在桁架可靠性分析中的应用

本文首先介绍了系统失效的分支-界限分析法，然后以空间桁架系统为例用分支-界限分析法进行了可靠性分析。系统失效的分支-界限分析法直观、明了，适合对实际工程中的复杂系统进行可靠性分析。     

The labeled maximum matching problem

Given a graph G where a label is associated with each edge, we address the problem of looking for a maximum matching of G using the minimum number of different labels, namely the labeled maximum matching problem. It is a relatively new problem whose application is related to the timetabling problem. We prove it is NP-complete and present four different mathematical formulations. Moreover, we propose an exact algorithm based on a branch-and-bound approach to solve it. We evaluate the performance of our algorithm on a wide set of instances and compare our computational times with the ones required by CPLEX to solve the proposed mathematical formulations. Test results show the effectiveness of our procedure, that hugely outperforms the solver.     

有机硅／三元乙丙橡胶共混研究

本文对有机硅／三元乙丙橡胶共混的相容性和共硫化进行了研究，探讨了共混比例、填料、助剂、工艺条件等因素对共混胶力学性能的影响。结果表明，提高共混胶的相容性和共硫化性，是获得性能优异产品的关键，从而使这一新型材料在新的领域广泛应用。     

浅谈丁基胶垫与气门嘴的粘合

本文介绍了丁基橡胶垫与铜制气门嘴粘合的有关问题，并提供了解决方法。     

不确定性塑胶制品硫化过程的智能控制策略

橡胶制品硫化过程极其复杂，制品性能与诸多不确定性因素有关，产品质量难以控制。针对生产过程中制品质量稳定性问题，剖析了塑胶制品成形过程的特性，研究了硫化过程中采取的控制策略和控制算法，最后探讨了工程实现的相关问题。