可膨胀石墨催化合成醋酸丁酯

可膨胀石墨对醋酸丁酯的合成具有较高的催化活性。最佳条件是正丁醇与醋酸的摩尔比为1：1．15，催化剂用量为醇和酸总质量的5．59％，反应时间55min，醋酸丁酯收率可达98％以上。     

Rheology of poly(n‐butyl methacrylate) and its composites with calcium carbonate

Poly(n‐butyl methacrylate) (PBMA) composites with calcium carbonate (CaCO₃) were prepared by in situ radical copolymerization of butyl methacrylate (BMA) and methacrylic acid (MA) with precipitated calcium carbonate. To compare the different rheological behaviors of the monomer mixtures with CaCO₃ and the composites, the steady and dynamic viscosities of BMA/MA/CaCO₃ and poly(BMA/MA/CaCO₃) were measured by means of steady and oscillatory shear flows. The viscosity of the mixture BMA/MA/CaCO₃ was found to increase evidently with the increasing of CaCO₃%. The influence of MA% on viscosity of BMA/MA/CaCO₃ was slight. During the in situ polymerization, the viscosity of the reacting system was measured to be enhanced by a factor of about 10⁴ from the monomer/CaCO₃ mixture to composites. The dependency of zero‐shear viscosity on molar mass of PBMA was also investigated. The relation between the zero‐shear viscosity and molar mass is η₀ = 10^?15 M_w^3.5. The evolution of the viscosity with the temperature for both PBMA and its composites was obtained and time–temperature superposition was used to build master curves for the dynamic moduli. The flow activation energies were found to be 115.0, 148.6, and 178.7 kJ/mol for PBMA, composite PBMA/CaCO₃ (90/10), and PBMA/MA/CaCO₃ (89/1/10), respectively. The viscosity of the composites containing less than 10% CaCO₃ was lower than that of pure PBMA with the same molar mass. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1376–1383, 2003     

铁铵矾为催化剂对合成乙酸仲丁酯的影响研究

以铁铵矾为催化剂,对冰乙酸与仲丁醇之间的酯化反应进行了研究,考察了催化剂用量、酸醇摩尔比、反应时间对合成乙酸仲丁酯的影响,结果表明:铁铵矾有一定催化活性。当冰乙酸物质的量为0.12mol,冰乙酸、仲丁醇及铁铵矾的摩尔比为1∶2∶0.12,催化剂质量为7.0g,反应2.5h后,收率可达75.12%,所得产品无色透明。     

Damping of vinyl acetate–n‐butyl acrylate copolymers

A photopolymerization process at room temperature was devised to copolymerize vinyl acetate (VAc) and n‐butyl acrylate (BA) mainly to prepare rubber‐like damping sheet bearing pressure‐sensitive adhesive property in this study. The investigations using both the differential scanning calorimeter and rheometric dynamic analysis show the existence of two glass transition temperatures for each copolymer. The scanning electron microscopic pictures reveal that the degree of microphase separation increases with increasing annealing time at 70°C. It was suggested that the rubbery domain (formed by the PBA blocks) disperses in the glassy domain (constituted by the PVAc blocks), making an effective damping entity. Excellent damping was observed for the copolymer samples, with the tanδ peak values as high as 1.76–1.80 at a certain temperature range and with tanδ> 0.3 at quite wide temperature ranges. In addition, the copolymers containing more VAc tend to have the higher damping. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1396–1403, 2004     

Ti(SO_4)_2/SiO_2催化合成油酸正丁酯

考察了 Ti(SO4 ) 2 /Si O2 在油酸丁酯合成反应中的催化性能 ,对影响酯化的条件进行了优化 ,优化条件如下 :0 .2 g Ti(SO4 ) 2 /g Si O2 ,油酸 0 .1 mol,丁醇 0 .2 mol,催化剂 1 g,反应温度 1 40°C,反应时间 6 0 min。优化条件下 ,油酸的酯化率 98%,收率 91 %。     

固体酸S_2O_8~(2-)/Fe_2O_3-SiO_2催化制备马来酸二己酯

在铁氧化物中引入硅的氧化物 ,并用S2 O82 -浸渍铁硅复合氧化物 ,制得固体酸催化剂S2 O82 -/Fe2 O3 SiO2 (Ⅰ )。用马来酸酐与正己醇的酯化反应考察了催化剂的活性。通过XRD和TEM分析 ,对催化剂的结构进行了表征。结果表明 ,Ⅰ的最佳制备条件为 :n(Fe)∶n(Si)为 5∶1、70℃陈化 3h ,2 0 0℃焙烧 2h、用 0 2 5mol/L的 (NH4) 2 S2 O8浸渍 3h、在 5 5 0℃下煅烧 6h ;Ⅰ的催化活性比S2 O2 -8/Fe2 O3 和SO2 -4/Fe2 O3 SiO2 更强 ,S2 O2 -8对Fe2 O3 SiO2 的促进作用明显高于SO2 -4;SiO2 的引入提高了催化剂的分散效果 ;有较好的使用重复性 ;它代替硫酸、对甲苯磺酸用于催化马来酸酐和正己醇的酯化反应可得无色透明的酯化产物     

Sex pheromone of the mullein bug,Campylomma verbasci (Meyer) (Heteroptera: Miridae)

The first known sex pheromone for the family Miridae is reported for the mullein bug,Campylomma verbasci (Meyer) (Heteroptera: Miridae). Extracts of and Porapak Q-trapped volatiles from females were attractive to males in field bioassays. Butyl butyrate and hexyl butyrate were the predominant compounds in the females' volatiles, but these compounds previously had been found to be inactive when released alone or in combination. Butyl butyrate in combination with an isolated trace chemical, (E)-crotyl butyrate (which was inactive alone), rivaled the attraction elicited by five live females. When synthetic butyl butyrate and (E)-crotyl butyrate in a 16: 1 ratio were released at 91 or 183 g/day, they comprised an effective attractant for male bugs.     

电容器行业用橡胶制品及其发展趋势

分析了应用于电容器行业中橡胶塞和橡胶盖板的国内现状，通过实验对比了国内外产品的差距，分析了进口和国产板材的logR-T曲线图。指出了应用于电容器行业的橡胶制品的要求，主要是提高橡胶塞的耐高温，耐热老化性能，提高橡胶复合盖板在高温下的绝缘性。     

中空玻璃用热熔密封胶的研制

采用丁基橡胶研制用于中空玻璃单道密封的热熔胶.研究主体树脂品种、增黏剂、改性剂、填料的类型及用量对材料性能的影响.实验采用正交方法对胶料成分进行配比,在开放式塑炼机的混炼下得到热熔密封胶胶料,并测得胶料与玻璃的黏接性、拉伸性及流变性.实验结果表明：加入具有良好增黏作用的低分子聚异丁烯以及石蜡,都有利于提高胶条的黏接性能,丁基橡胶对胶条的拉伸性能影响最大,加入少量石蜡,可以降低黏度,增加其流动性.     

废聚苯乙烯泡沫塑料接枝丙烯酸丁酯改性白乳胶的研制

通过对聚苯乙烯泡沫塑料进行乳化研究，获得了稳定的聚苯乙烯乳液。再采用丙烯酸丁酯（BA）和功能单体对聚苯乙烯进行接枝改性，制成水乳型胶粘剂。研究了溶剂比、乳化剂与稳定剂用量、改性单体及功能单体的用量、引发剂及交联剂用量等因素对粘接性能的影响。