氯化氢浸渍活性炭净化汞蒸气的研究

用氯化氢对吸附汞热气用的活性炭进行浸渍处理是一种新的偿试。用氯化氢浸渍后的活性炭，对汞的吸附效率和吸附容量与没有浸渍的活性炭相比，均有很大的提高，同时，与其它吸附汞用的浸渍剂相比，具有价格低，来源广的优点，对汞的吸附效率平均在９５％以上。     

中国南海北部二氧化碳气成因

中国南海北部海域在油气勘探中发现了CO_2气,对油气有无影响?在借鉴世界、中国东部陆地CO_2气成因研究成果的基础上,从分析研究区CO_2,气的分布入手,采用多种方法,在综合分析基础上,对本区CO_2气藏进行分类.认为研究区CO_2;气藏为无机成因,其特征受各盆地或地区具体地质条件的控制.哈萨克斯坦引起了国际石油界的很大关注,但它并不是前苏联唯一的具吸引力之地.美国地质调查调查所(丹佛)和AAPG今年著名讲演者Gregory F Ulmishek说.前苏联有20多个沉积盆地生产油气或具有尚未开采的发现.Ulmishek 1980年到美国前,获得过莫斯科石油学院地质学硕士学位,作为一个地质学家在前苏联工作过23年.他的1993—1994年题为“前苏联主要油气地质学及勘探潜力”的著名演讲在1993年12月6日至17日和1994年3月28日至4月8日的巡回活动中推出.     

Comparison of interfaces in Ti composites reinforced with uncoated and TiB2/C-coated SiC fibres

Interfaces play an important role in determining the mechanical properties of composite materials. The interfaces established between a titanium-alloy matrix (Ti-6Al-4V) and uncoated and TiB₂/C-coated SiC fibres are analysed by scanning electron microscopy, transmission electron microscopy and X-ray techniques. Emphasis is placed upon the interfacial morphology and microstructure, identification of reaction products, and the stability of the coating layer. Complex multi-reaction layers are observed frequently in the interfacial zones. Previous, often contradictory, reports about the interlayers are reviewed. Experimental observation demonstrates that the type and distribution of interlayers vary in a given system, due to prolonged treatment of the samples at temperature. The formation and distribution of the interlayers are discussed further, with respect to these and previous findings. Methods of reducing interfacial reactivity are discussed.     

Influence of rainfall on the performance of bioretention systems modified with activated carbon and biochar

The use of bioretention areas is common in urban stormwater management, but their performance varies significantly depending on rainfall characteristics and design conditions. In this study, a pilot experiment using bioretention columns with different media (commercial activated carbon and river sediment-derived biochar) investigated the influence of rainfall on bioretention performance. The results indicated that the runoff volume retention ratio (R_v), which included the runoff purified and discharged at the bottom of the column, and the runoff retained in media during rainfall event, decreased significantly with increases in the rainfall event return period (p < 0.05). The R_v of the activated carbon and biochar columns decreased with a 2-yr return period and then fell further with a 50-yr return period. Porous material has been shown to improve the water-holding capacity of bioretention media, but it did not result in an improved R_v under heavy rain that exceeded the 2-yr return period. With the increase of the return period from two to 50 yr, the mass removal efficiency (R_L) of total phosphorus and phosphate illustrated a clear decreasing trend in all columns. The total nitrogen, ammonia and nitrate removal did not show a clear trend with return periods because of transformations among different forms of nitrogen and similar saturation periods during the different rainfall events. The influence of the return period on chemical oxygen demand (COD) removal was related to whether the inflow COD reached maximum COD removal capacity of the bioretention media. Under a rainfall event with a specific return period, there were no significant differences in the R_L of all nitrogen species and COD among the different columns (p > 0.05). The addition of adsorptive material, such as activated carbon and biochar, may not be the key factor for improving nitrogen and COD removal under heavy rain that exceeds the 2-yr return period. The bioretention performance of phosphorus removal from urban stormwater runoff could be improved by replacing or adding media with high adsorption capacity, but these improvements would not be significant under heavy rain that exceeds the 2-yr return period. The results provide some reference for evaluating bioretention performance and optimizing bioretention design in the future.     

中碳结构钢件的锻造成形与锻后调质一次完成的热加工新技术

本文是利用“形变诱发析出”原理通过控制热变形成形过程获得一种能在过冷分解时使碳化物呈颗粒状弥散析出的形变奥氏体状态,又通过控制冷却抑制先共析铁素体的析出,同时促进碳化物颗粒的析出,从而得到100％调质型组织,它达到了传统工艺的水平。     

低碳钢显微结构的EBSD表征

近年来,新开发的电子背散射衍射技术将多晶材料的显微组织、微区成分与结晶学数据分析联系起来,能对晶界类型、取向、位向差和结构及其分布进行观察、统计测定和定量分析,从而建立了晶界结构、取向和织构等与多晶材料性能的定量和半定量关系,成为现代材料研究的重要实验技术。笔者结合低碳钢生产中的一些实际问题,扼要介绍了电子背散射衍射技术中的晶体取向图在多晶材料显微结构表征中的应用。     

轧制工艺对高碳钢线材性能影响的研究

研究了高碳钢线材轧制过程中终轧温度、吐丝温度和冷却速度对线材性能的影响,并采用数值优化方法建立了性能预测模型,其结果表明,模型计算精度较高。     

STUDY ON THE VARIATION MECHANISM OF CARBON CONTENT OF LIQUID IRON IN MELTING GASIFIER

This paper studied the changing principles of carbon content in direct reduction iron (DRI) and liquid iron in the COREX melting gasifier. Under the normal working conditions of experimental equipment, liquid nitrogen was poured into the melting gasifier from its tuyere to cool down quickly. And then seven cross sections were made to study the carburization reaction and its characteristics of the solid iron and the liquid iron, and also the reaction of carbon between the slag and the metal. According to the results, the influences of the thickness of the semi-coke layer and the temperature on the carbon content of liquid iron in the COREX melting gasifier were confirmed.     

铸造用CO2硬化冷芯盒材料及工艺的发展

铸造用CO2硬化粘结剂系统具有气硬冷芯盒的优点,同时又具有环保方面的优势。主要介绍了水玻璃-CO2法、聚丙烯酸钠-CO2法、酚醛树脂-CO2法三种工艺。这些工艺方法近年来国内外研究较多,并且取得了很大进展。