催化部分氧化法制氢的水碳比控制与探讨

简要介绍了国内少有的干气催化部分氧化转化制氢工艺,重点讨论了转化水碳比的控制条件,对降低水碳比操作进行了有益地探讨。     

新型阳离子聚合物NCP的合成及应用

介绍了用高分子反应法在固态条件下合成高阳离子度阳离子聚合物NCP的方法,确定了其最佳反应条件,测定了聚合物阳离子度和反应效率.采用L9（34）正交试验法得出合成NCP的最佳反应条件为：聚合物与阳离子化试剂质量比为11：3;催化剂用量为1.072%,反应时间为2.5 h;反应温度为80℃.实验结果表明,在反应体系中加入催化剂和少量有机或无机溶剂可显著提高反应速率和效率;使用少量润湿剂,可最大限度地限制副反应,造成反应部位的局部浓度高,提高反应效率.阳离子聚合物NCP可作为增粘降滤失剂用于配制正电性钻井液,效果优良,且耐温性能良好,同时基于阳离子与阴离子聚合物在溶液中生成凝胶状沉淀物的特性,NCP还可用于解决注聚区块生产井产出水中含高浓度聚合物的问题.     

新型处理药剂（EP-110）处理各种重金属离子的实验研究

各行各业生产过程中会产生大量废水,重金属离子污染物是其中的重要控制指标,传统的处理方法不能完全解 决这类污染。本文通过大量的实验数据,对新型的处理药剂(EP-110)处理各种重金属离子的性能做了全面的测试、分析,并 提出了使用方法。     

Works of adhesion at the carbon fiber-liquid interface determined using a modified wetting technique

Works of adhesion W_SL between aqueous solutions with pH values in the range from 1 to 14 and carbon fibers from different sources, which were additionally treated in an inert atmosphere or in oxygen, were measured by use of a microbalance. These works of adhesion W_SL were found to show distinct stepwise dependencies on the pH value. The works of adhesion W_SL are attributed to dispersion interactions W_SL¹ and various acid-base interactions w_sl^ab—in the latter case between the acidic and basic surface groups of carbon and the various basic and acidic aqueous solutions.     

活性炭单柱提取肌苷新技术研究

活性炭单柱提取肌苷新技术研究李永泉，张进，姚恕，郑莲英，俞峰（杭州大学生物系杭州３１００２８）（浙江大学化工系杭州３１００２７）关键词：肌苷，提取技术，活性炭单柱１前言目前，国内肌苷发酵后处理工艺落后，在分离提取工序中肌苷损失严重，收率一般只有５０％...     

Asbestos replacement aspects: Modification of the fibre-matrix interphase in lonomer based composites

Asbestos fibres, of the chrysotile variety, and chopped carbon fibres were pretreated by an in-situ polycondensation technique eventually resulting in a polyamide coating on the fibre surface. Ionomer based composites containing either carbon or asbestos fibres in random in plane fibre orientation were prepared, and the influence of this coating process on the tensile properties was investigated. It was found that for the asbestos-filled composites the presence of the nylon 6,6 interlayer improves the tensile performance, especially at moderate polyamide depositions. This is not the case with the pretreated carbon-filled composites for which carbon fibres with higher polyamide contents are preferred. Combinations of the treated asbestos fibres with carbon and/or aramid fibres may be used to reduce the asbestos content in asbestos-only based engineering plastics.     

X-ray structure analysis and elastic properties of a fabric reinforced carbon/carbon composite

The effect of heat treatment on microstructure of a plain-weave carbon fabric reinforced carbon-carbon composite with phenolformaldehyde-derived carbon matrix was investigated by X-ray diffraction. The diffraction patterns were analysed by the least-square fitting program Carbonxs. After heat treatment from 1000 to 2800 °C the interplanar distance of (002) planes decreased from 3.488 to 3.420 Å and the lattice parameter in basal plane increased from 2.440 to 2.464 Å, respectively. Simultaneously, the coherent block size in the basal plane directions increased from 18 to 54 Å, which was accompanied by an increase of the fraction of organised carbon atoms from 0.50 to 0.85. The 002 diffraction profile of the composite was much narrower than the sum of peaks of the matrix and fabric alone. This can probably be caused by a better crystallographic ordering (or by a partial graphitisation) of the matrix in the composite. On the other hand, the composite Young’s modulus slightly decreased with the treatment temperature increasing from 2200 to 2800 °C in spite of the established strong improvement of fibre crystallinity and, therefore, fibre modulus. The mechanisms diminishing the modulus of composite (e.g. partial matrix graphitisation at the fibre/matrix interface and decreasing fibre/matrix contact area) probably prevailed over the increasing contribution of the fibre modulus.     

制氢尾气二氧化碳回收装置设计

对制氢尾气二氧化碳的回收装置进行了简捷设计，流程分析，并对换热装置的换热量和传热面积给出了算法和有关数据。     

Nanoporous activated carbon cloth for capacitive deionization of aqueous solution

Activated nanostructured-carbon cloths with a high ratio of surface area to volume are used as electrode for capacitive deionization. The electrochemical properties on capacitive deionization for NaCl solution have been investigated to improve efficiency of capacitive deionization properties from aqueous solution, employing chemical surface-modification by etching in alkaline and acidic solution. The removal efficiency of inorganic salts of activated carbon cloths by chemical modification significantly increased. Specially the carbon cloth surface modified in HNO₃ showed an effect of improvement in the CDI efficiency due to not only ion adsorption by an electric double layer, but also electron transfer by Faradaic reaction.