催化氧化环己酮/环己醇清洁合成己二酸

以质量分数为 30 %的过氧化氢为氧化剂 ,Na2 WO4·2H2 O为催化剂 ,在酸性配体存在的条件下催化氧化环己酮 /环己醇清洁合成己二酸。反应在无溶剂、无相转移剂条件下进行 ,考察了各种不同配体及配体用量等对反应的影响。采用磺基水杨酸为配体 ,与Na2 WO4·2H2 O的摩尔比为 1∶2时 ,催化氧化环己酮和环己醇的己二酸的分离产率分别为 82 .1%和 6 8.6 %。并进一步考察了该催化体系对环己酮和环己醇混合物的催化性能。     

对苯二甲酸加氢精制的反应规律

在高压磁力搅拌间歇反应釜中研究了粗对苯二甲酸在 Pd- C催化剂上加氢精制反应的规律。实验温度范围为 2 75～ 2 95℃ ,实验压力范围为 6 .0 8～ 8.0 8MPa(表压 )。研究发现加氢反应速率随着催化剂量和氢分压的增加而提高 ,在实验温度范围内 ,提高加氢温度 ,反应速率反而有所下降 ;投料中对苯二甲酸的质量浓度对反应速率也有一定影响 ,在 2 82℃反应条件下合适的质量分数为 2 5 %。     

催化无基体法制备碳纳米管

用一种新的催化裂解法 ,制备出了直径在 2 0～ 30nm ,长度为 2 0 0 μm的碳纳米管。在此方法中 ,繁琐的催化剂制备工艺被省略 ,催化剂前驱体在载气带动下直接进入反应器。另外还发现两类结构独特的碳纳米管。     

碳四烷烃催化裂解制低碳烯烃的研究进展

论述了碳四烷烃催化裂解制低碳烯烃的催化剂体系、影响因素及催化裂解方式。该催化剂体系包括硅铝酸盐及锆硫酸盐,氧化铝与碱金属或碱土金属的混合物,负载型催化剂等3种类型。其中分子筛(晶体硅铝酸盐)及其改性催化剂是研究开发的主要方向。除操作条件外,稀释剂、引发和抑制剂和裂解反应方式对催化裂解反应均有影响。催化裂解反应机理与催化剂的种类和反应条件相关。对于酸性分子筛催化剂有2种比较公认的机理:正碳离子机理,自由基与正碳离子机理两种形式。研究表明碳四烷烃,特别是正丁烷催化裂解制低碳烯烃具有良好的低碳烯烃收率,收率可达50%以上。     

An evaluation of commercial nickel catalysts during hydrogenation of soybean oil

The activities of several commercial nickel catalysts were determined by measuring their activation energies. Among these catalysts, G95E, Resan 22, Nysosel 222 and 325, all with low activation energy, were more active than DM3 and G95H, which had higher activation energy. However, the less active catalysts increased the linoleate selectivity of soybean oil during hydrogenation. The yields of bothtrans isomers and winterized oil were higher for the more selectively hydrogenated oil catalyzed by the less active catalysts. In the sensory evaluation, the fractionated solid fat that contained moretrans isomers was lower in flavor scores than the fractionated liquid oil after hydrogenation and winterization of soybean oil.     

4,4′,4″-三氨基三苯胺的合成

本文从对氯硝基苯和对硝基苯胺出发,经过两步反应合成了三偶氮类光导材料的重要中间体4,4′,4″-三氨基三 苯胺,其中第一反应采用KF/季铵盐催化法,收率48.4％,第二步反应采用钯碳催化加氢法,收率91.4％。     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

苯甲酸加氢催化剂Pd/C抗中毒方法研究及应用

研究了苯甲酸加氢过程中Pd/C催化剂的失活原因，针对CO引起Pd/C活性降低，开发了SRNA－5助催化剂，有效消除了反应中生成的CO对Pd/C催化剂活性的影响。并在石家庄化纤公司完成了工业试验，工业试验表明，在不改变原工业流程的基础上，通过向苯甲酸加氢工业装置中加入SRNA－5助剂，有效提高Pd/C催化剂活性，该厂每年减少催化剂直接费用1500万元。     

4-乙基-1-苯基环己醇的催化氢解

在乙醇体系中,4 丙基 1 苯基环己醇在2MPa氢气压力下200℃反应8h,完全氢解且反式选择性高,得到71.7%的反式产物和22.3%的顺式产物。考察了温度等对氢解反应的影响,发现高温有利于反式产物的生成。     

Pt/C活性催化剂催化氢化合成6-氯-2-羟基喹喔啉

以对氯邻硝基乙酰乙酰苯胺为原料，在碱性条件下经环合及催化氢化合成6-氯-2-羟基喹喔啉。采用自制的Pt／C催化剂，考察了反应条件对产品收率的影响，在85℃，1．0～1．3MPa氢气压力下进行加氢还原反应，总收率89．6％(以对氯邻硝基乙酰乙酰苯胺转化为6-氯-2-羟基喹喔啉)。