脂肪醇聚氧乙烯醚的厌氧与好氧生物降解性

以脂肪醇聚氧乙烯醚(AEO)为目标污染物，在等同条件下做厌氧消化污泥和好氧活性污泥对其生物降解性能的对比实验，得出了同一系列AEO分子中聚氧乙烯基与整个分子的降解难易程度的关系。表明：①污泥会对AEO分子产生吸附一脱附作用而出现假降解率，克服假降解率的干扰是准确测定AEO生物降解性的关键因素；②厌氧和好氧条件下，AEO均可降解，但厌氧降解要稍优于好氧降解；③AEO中聚氧乙烯基的单元数(n)是影响其生物降解的重要因素，相同碳链的直链烷基，生物降解率随n的增加而明显降低。     

Synergic influence of a surfactant and ultrasonication on the preparation of soluble,conducting polydiphenylamine/silica‐nanoparticle composites

Conducting polydiphenylamine was used to encapsulate silica nanoparticles through the oxidative polymerization of diphenylamine in the presence of ultrasonic irradiation. The polymerization was performed in the presence of sodium lauryl sulfate as a surfactant. Experiments performed in the absence of ultrasound clearly demonstrated that the application of ultrasonication played multiple roles in the preparation of a composite of polydiphenylamine with silica nanoparticles. Ultrasonication dispersed the silica nanoparticles, converted sodium lauryl sulfate to lauryl alcohol, and augmented the dispersion of the silica‐nanoparticle/polydiphenylamine composite in an organic medium. Silica‐nanoparticle/polydiphenylamine composites were also prepared in the absence of ultrasound and/or sodium lauryl sulfate. The silica‐nanoparticle/polydiphenylamine composites were characterized with Fourier trans form infrared spectroscopy, ultraviolet–visible/near‐infrared spectroscopy, and thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3912–3918, 2006     

Gemini表面活性剂的研究现状及其前景

Gem in i表面活性剂具有特殊的结构与性质,所以也就具有了独特的用途。本文从合成、应用等方面系统地分析了Gem in i表面活性剂国内外研究现状,重点介绍了国内的最新研究进展,并展望了其发展前景。     

对中国入世后洗涤剂工业形势及相关问题的分析 --国内外业界高层人士访谈

中国加入WTO后，中国洗涤用品行业面临着新的机遇与挑战，中国洗涤用品市场将面临更加激烈的竞争。由于环保的呼声越来越高，中国已开始在部分地区禁磷。中国洗涤用品工业将如何发展，其前景如何，专家的看法又如何，就这些问题本刊专访了有关人士。     

Synthesis and characterization of dehydroabietic acid derivatives suitable for surfactant synthesis

The syntheses of derivatives of dehydroabietic acid suitable for further manipulation into surfactants are presented. The compounds are produced at very high yields and purity. They contain several different functional groups, e.g., carboxylic acid, amine, ester, alcohol, and an aromatic group. The functional groups are useful as the linking unit to the hydrophilic part in synthesizing surfactants.     

柠檬酸三酯三季铵盐阳离子表面活性剂的合成

采用柠檬酸、环氧氯丙烷和十二烷基二甲基叔胺合成三烷基三季铵盐阳离子表面活性剂。得到较佳工艺条件:n(柠檬酸)∶n(十二烷基二甲基叔胺)∶n(环氧氯丙烷)为1∶3∶3,于85℃下反应12 h,得到产率大于90%的目的产物。测定了产物的cmc为3.3×10-4mol/L。研究了反应条件对目的产物产率的影响。结果表明:随反应温度的升高,产率逐渐增加,当升温到一定程度后,产率略有下降;反应12 h后产率基本不再变;十二烷基二甲基叔胺及环氧氯丙烷与柠檬酸的投料比大于3时,对三烷基三季铵盐阳离子表面活性剂产率的增加影响不大;异丙醇溶剂有利于反应产率的提高,但随着溶剂量的增多,反应产率会下降。     

扩链剂对阳离子聚氨酯乳液性能的影响

本文讨论了用三乙醇胺制备阳离子聚氨酯乳液，三乙醇胺用量，扩链剂，如乙二醇、丁二醇、二甘醇、三甘醇对乳液性能的影响。还讨论了扩链剂对其粘结强度的影响。     

α-蒎烯阳离子聚合工艺的改进

以A lC l3/SbC l3为催化剂,用SbC l3逐步滴加方式,通过两步聚合工艺制备了α-蒎烯树脂。通过正交实验,对α-蒎烯调控聚合的各影响因素进行了研究。结果表明,与传统的一步聚合工艺相比,该工艺在保持单体高转化率的同时,使聚合反应变缓,避免了由于反应过快而引起的聚合产物中低聚体含量高,Mn下降的现象;有效提高了聚合物的软化点;降低了聚合物的色值。在优化工艺条件下,催化剂用量比传统工艺减少30%以上,制得的α-蒎烯树脂软化点为138℃(环球法),色泽3(铁钴色),得率达81.0%,软化点提高8℃以上,色泽降低2级以上。产品各项指标均超过了我国行业标准LY/T1453—1999特级水平。     

Status of aqueous surfactant phase science

Recent phase studies of several surfactant-water systems, using new or refined methods, have revealed significant errors in earlier phase diagrams. These diagrams had been determined largely using methods based on the isoplethal phase studies principle. This principle has inherent limitations which do not exist in isothermal methods. Isothermal nuclear magnetic resonance and refined calorimetric methods have been extensively used in recent surfactant phase studies. Methods based on the new lyotrope gradient (swelling) principle show great promise as a means of improving the efficiency and quality of surfactant phase studies.     

阳离子双子表面活性剂的应用研究进展

介绍了阳离子双子表面活性剂近年来在新材料制备、抗腐蚀、杀菌、三次采油、织物染整、生物技术及造纸工业等方面的应用。