体外消化/Caco-2细胞模型分析发酵对面粉铁生物利用率的影响

中国居民膳食以谷物为主食,谷物中铁吸收率低是造成营养性贫血的主要原因,适当的加工方式可缓解谷物中植酸、多酚等物质对铁生物利用率(Fe bioavailability,FeBV)的影响。为考察酵母发酵对面粉FeBV的影响,采用体外消化/Caco-2细胞模型。结果表明,面团在发酵后pH值呈下降趋势,酸度呈上升趋势;多酚、植酸含量降低,植酸酶活性升高,以上各指标在发酵前后差异均具有统计学意义(P0.05)。发酵后面粉样品的FeBV增加约5%~38%,大多数面粉FeBV发酵前后比较,差异具有统计学意义(P0.05)。结论:发酵可降低面粉的pH值,增加酸度,有利于面粉多酚和植酸的降解以及植酸酶活力的升高,可有效提高面粉FeBV。     

Microstructural characterization of spray-dried NiO-8YSZ particles as plasma sprayable anode materials for metal-supported solid oxide fuel cell

The plasma spray method is widely used to produce NiO-8YSZ (composed of nickel oxide (NiO) and 8 mol% yttria-stabilized zirconia) anode layers in metal-supported solid oxide fuel cell (SOFC). Flowability control of microsized particles is important for achieving consistent performance of the SOFC anode layer. When microsized particles are fabricated via spray drying and sintering, the most significant factors that influence flowability are their sizes, distribution, and surface conditions. Thus, the aim of this study is to analyze the fabrication conditions for microsized NiO-8YSZ cermet particles made from a nanoscale, sinterable NiO-8YSZ dispersion solution by using an appropriate spray-drying and sintering process. The characteristics of the as-sprayed and sintered NiO-8YSZ composite particles (such as size, distribution, roughness, and nanostructure) were analyzed via field emission scanning electron microscope (FE-SEM), energy dispersive spectroscopy (EDS), particle size distribution (PSD), Brunauer–Emmett–Teller (BET) surface area, and atomic force microscopy (AFM). The as-sprayed microsized NiO-8YSZ particles became smaller and more uniformly distributed as the rotational speed used for spray drying increased. As a result of sintering, the extent of shrinkage of as-sprayed microsized NiO-8YSZ particles generated at high RPMs was lower than that of particles formed at low RPMs. No significant difference was observed in the distribution of the nanosized NiO and 8YSZ particles at different rotational speeds. Furthermore, the highest BET surface areas were observed for particles generated at 8000 RPM before sintering at 13.74 m²/g. After sintering, the highest BET surface area was 0.94 m²/g for particles generated at 16,000 RPM. Differences in nanostructure and surface roughness between as-sprayed and sintered microsized NiO-8YSZ particles were identified via AFM. This study is expected to provide important fundamental information useful for optimizing SOFC efficiency by promoting flowability control during the production of SOFC anodes via plasma spraying.     

Vacuum evaporator with the electrochemical generator on oxyhydrogen cell

The article deals with the improvement of the food and pharmaceutical industry heat-exchange equipment. Moreover, the article shows a problem of relevance of evaporation improvement in the technology of biologically active additives (BAA) from wild-growing vegetable. The possible usage of the electrochemical generator on oxyhydrogen cell for power supply is highlighted. It presents the results of experiments on the device with infrared heating of liquid through a free surface with the vortex for mated from the impeller rotation. The relations between size and form of vortex and a heating rate are shown. The flow sheet containing the generator on oxyhydrogen cell as thermal and electric energy resource for evaporation has been suggested.     

Bubble behaviors in direct methanol fuel cell anode with parallel design

In this paper, the Volume of Fluid (VOF) method for tracking the gas-liquid interface is employed to investigate the carbon dioxide (CO₂) behaviors inside the anode of a direct methanol fuel cell (DMFC). The CO₂ bubble emergence processes from the catalyst layer (CL) to the gas diffusion layer (GDL) and then to the flow channels are studied with two different strategies. In the first strategy, the CL and GDL are modeled as a uniform porous layer; in the second strategy, they are modeled as a well-ordered-path GDL and a uniform CL. The simulation results show that the second modeling strategy can better capture and match the fundamental phenomena of CO₂ bubble formation and evolvement observed from the experiments inside a DMFC anode.     

一种无线座机锁小区的技术方案及系统

全业务运营环境下,为提升运营商竞争力,某移动公司推出无线座机业务,其业务资费比普通的号码套餐较为优惠.本文提出了一种无线座机锁小区的技术方案及系统,该方案及系统能主动适应复杂多变的无线环境和不断调整优化的无线系统,从而有效限制住无线座机终端的优惠范围.     

FT-IR Microspectrometry Reveals the Variation of Membrane Polarizability due to Epigenomic Effect on Epithelial Ovarian Cancer

Ovarian cancer, as well as other cancers, is primarily caused by methylation at cytosines in CpG islands, but the current marker for ovarian cancer is low in sensitivity and failed in early-stage detection. Fourier transform infrared (FT-IR) spectroscopy is powerful in analysis of functional groups within molecules, and infrared microscopy illustrates the location of specific groups within single cells. In this study, we applied HPLC and FT-IR microspectrometry to study normal epithelial ovarian cell line immortalized ovarian surface epithelium (IOSE), two epithelial ovarian cell lines (A2780 and CP70) with distinct properties, and the effect of a cancer drug 5-aza-2''-deoxycytidine (5-aza) without labeling. Our results reveal that inhibition of methylation on cytosine with 5-aza initiates the protein expression. Furthermore, paraffin-adsorption kinetic study allows us to distinguish hypermethylated and hypomethyated cells, and this assay can be a potential diagnosis method for cancer screening.     

Influence of different carbon nanostructures on the electrocatalytic activity and stability of Pt supported electrocatalysts

Commercially available graphitized carbon nanofibers and multi-walled carbon nanotubes, two carbon materials with very different structure, have been functionalized in a nitric–sulfuric acid mixture. Further on, the materials have been platinized by a microwave assisted polyol method. The relative degree of graphitization has been estimated by means of Raman spectroscopy and X-ray diffraction while the relative concentration of oxygen containing groups has been estimated by X-ray photoelectron spectroscopy, which resulted in a graphitic character trend: Pt/GNF > Pt/F-GNF ? Pt/MWCNT > Pt/F-MWCNT. Transmission electron microscopy showed that the Pt particle size is around 3 nm for all samples, which was similar to the crystallite size obtained by X-ray diffraction. The activity towards electrochemical reduction of oxygen has been quantified using the thin-film rotating disk electrode, which has shown that all the samples have a better activity than the commercially available electrocatalysts. The trend obtained for the graphitic character maintained for the electrochemical activity, while the reverse trend has been obtained for the accelerated ageing test. Long-term potential cycling has demonstrated that the functionalization improves the stability for multi-walled carbon nanotubes, at the cost of decreased activity.     

Spatial mapping of electronic states in κ-(BEDT-TTF)2X using infrared reflectivity

Abstract

We review our recent work on spatial inhomogeneity of the electronic states in the strongly correlated molecular conductors κ-(BEDT-TTF)₂X. Spatial mapping of infrared spectra (SMIS) is used for imaging the distribution of the local electronic states. In molecular materials, the infrared response of the specific molecular vibration mode with a strong electron–molecular vibration coupling can reflect the electronic states via the change in the vibration frequency. By spatially mapping the frequency shift of the molecular vibration mode, an electronic phase separation has been visualized near the first-order Mott transition in the bandwidth-controlled organic conductor κ-(BEDT-TTF)₂Cu[N(CN)₂]Br. In addition to reviewing SMIS of the phase separation, we briefly mention the electronic and optical properties of κ-(BEDT-TTF)₂X.     

Preparation and evaluation of poly(2-hydroxyethyl aspartamide)-hexadecylamine-iron oxide for MR imaging of lymph nodes

The purpose of this study was to synthesize biocompatible poly(2-hydroxyethyl aspartamide)–C₁₆-iron oxide (PHEA-C₁₆-iron oxide) nanoparticles and to evaluate their efficacy as a contrast agent for magnetic resonance imaging of lymph nodes. The PHEA-C₁₆-iron oxide nanoparticles were synthesized by coprecipitation method. The core size of the PHEA-C₁₆-iron oxide nanoparticles was about 5 to 7 nm, and the overall size of the nanoparticles was around 20, 60, and 150 nm in aqueous solution. The size of the nanoparticles was controlled by the amount of C₁₆. The 3.0-T MRI signal intensity of a rabbit lymph node was effectively reduced after intravenous administration of PHEA-C₁₆-iron oxide with the size of 20 nm. The in vitro and in vivo toxicity tests revealed the high biocompatibility of PHEA-C₁₆-iron oxide nanoparticles. Therefore, PHEA-C₁₆-iron oxide nanoparticles with 20-nm size can be potentially useful as T2-weighted MR imaging contrast agents for the detection of lymph nodes.     

Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer

The cathode microporous layer (MPL) is fabricated by various multiwall carbon nanotubes (CNTs), and its influence on the performance of a proton exchange membrane fuel cell (PEMFC) is evaluated. Three types of CNT with different dimensions are employed in the experiments, and the conventional MPL made by acetylene black (AB) is also considered for the purpose of comparison. The results show that the employment of CNT as MPL composition indeed may improve fuel cell performance significantly in comparison with the case of AB. The type of CNT with the largest tube diameter and straight cylinder in shape exhibits the highest cell performance. The corresponding optimal CNT loading and polytetrafluoroethylene (PTFE) content in the MPL are also evaluated. Results show that the case of cathode MPL composed of 1.5 mg cm^?2 CNT and 20 wt% PTFE exhibits the best performance in all the experimental cases. The present data reveal that the application of CNT for MPL fabrication is beneficial to promote PEMFC performance. Copyright © 2015 John Wiley & Sons, Ltd.