高压静电场纺丝法制备羟丙基甲基纤维素邻苯二甲酸酯超细纤维

通过高压静电场纺丝法制备了羟丙基甲基纤维素邻苯二甲酸酯(HPMCP)的超细纤维,并详细研究了溶液浓度、纺丝电压及混合溶剂的配比对纤维形态和直径的影响。当混合溶剂中的无水乙醇与二氯甲烷为1∶1(V/V)时,在纺丝电压为30kV的条件下,HPMCP可纺丝的浓度范围为7%～16%(wt)。溶液浓度为7%时,电纺得到珠状纤维;浓度大于8%时,得到表面光滑的圆柱状纤维。随着纺丝溶液浓度的增大,所得纤维的平均直径逐渐增大。在HPMCP溶液浓度(8%)和溶剂组成(无水乙醇/二氯甲烷=1∶1)保持一定时,随着纺丝电压的增大,所得纤维的平均直径呈下降的趋势。而在纺丝浓度和电压一定的情况下,随着混合溶剂中二氯甲烷体积分数的增大,所得纤维的平均直径先增大后减小,无水乙醇与二氯甲烷体积比为1∶1和1∶2时,所得纤维的直径分布相对集中。     

亚砜基改性纤维素膜的SO2气体渗透性能研究

分别使用二甲基亚砜浸泡的物理方法及苯基乙烯基亚砜加成的化学方法对纤维素膜进行了改性,并对改性膜的性能进行了测试.结果表明改性后纤维素膜仍为致密结构,SO2的渗透性能及其对N2的分离性能明显提高,其中改性液中添加二甲基亚砜的均相化学加成反应所得的改性膜具有较好的SO2渗透稳定性.     

含硫纤维素衍生物的研究进展

简述了近年来在含硫纤维素衍生物方面的研究进展。将含硫纤维素衍生物分为巯基纤维素与费原酯棉、水溶性含硫纤维素衍生物和聚硫醚纤维素三大类，对含硫纤维素衍生物的合成、应用及其与金属离子作用机理作了论述。     

Water flux,DSC, and cytotoxicity characterization of membranes of cellulose acetate produced from sugar cane bagasse,using PEG 600

Summary In this article, cellulose acetate produced through the homogeneous acetylation of sugar cane bagasse cellulose was used to produce membranes, using poly(ethyleneglycol) 600 (PEG 600) as an admixture. The membranes were characterized using water flux measurements (Payne’s cup), differential scanning calorimetry (DSC) and neutral red uptake (cytotoxicity). The results showed that PEG 600 acts as a crystallinity inductor and/or pore former in the cellulose acetate matrix. The induction of crystallinity is important for this system since it had not been reported on the literature yet. The results also demonstrated that the studied membranes present a nontoxic behavior.     

纤维素醋酸酯接枝己内酯的聚合研究

以冰醋酸为溶剂,浓硫酸为催化剂,将取代度为2 4的二醋酸纤维素水解为取代度为1 4的醋酸纤维素(CA)。以此醋酸纤维素为接枝骨架,ε 己内酯(ε CL)为接枝单体,在辛酸亚锡的引发下,合成了醋酸纤维素/聚己内酯接枝共聚物(CA g PCL)。研究了反应物纯度、原料配比、引发剂与单体摩尔比、反应时间、反应温度对单体转化率(C%)、接枝率(G%)、接枝效率(GE%)的影响。结果表明,当反应温度为140℃,单体ε 己内酯与醋酸纤维素的质量比为4∶1,引发剂辛酸亚锡与单体ε 己内酯的摩尔比为0 005,反应时间为16h,C%,GE%和G%分别为46 8%,65 2%和122 1%。     

尿素嵌入法制备纤维素氨基甲酸酯的研究

探讨了尿素嵌入法制备纤维素氨基甲酸酯(CC)的生产工艺。指出:选用聚合度为450~625、α-纤维素含量大于90/的纤维素浆粕,用14/~16/的氢氧化钠溶液,于40~50℃条件下活化处理30~40min后,与尿素以1∶2~3的比例混合,在137℃的二甲苯体系中反应2~3h,便可得到含氮量为2.4/~3.5/的纤维素氨基甲酸酯产物。该产物在氢氧化钠溶液中可形成良好的稳定溶液,过滤性好,可直接用于纺丝。     

Degradation of cellulosic and hemicellulosic substrates using a chelator‐mediated Fenton reaction

The involvement of catechol and hydroxamate chelators, along with hydrogen peroxide and Fe³⁺, in the degradation of cellulosic and hemicellulosic substrates was examined with the purpose of improving our current knowledge of the non‐enzymatic mechanisms involved in wood biodegradation by fungi. It could be demonstrated that a catechol chelator‐mediated Fenton reaction not only clearly degraded hemicellulosic substrates but also significantly accelerated and increased the effectiveness of degradation reactions. On the other hand, when a hydroxamate chelator‐mediated Fenton reaction was used, an inhibitory effect was observed. When cellulosic substrates underwent a chelator‐mediated Fenton reaction, no significant difference in degradation was observed between catechol and hydroxamate chelator‐mediated reactions. However, a catechol‐mediated reaction did accelerate the degradation of cellulosic substrates at the beginning of reactions. In addition, it was observed that with a chelator‐mediated Fenton reaction, oxidation of cellulose proceeds depolymerization. Copyright © 2005 Society of Chemical Industry     

纤维素衍生化手性固定相的制备和对噻吗洛尔拆分

用超声方法合成了三(3,5-二硝基苯甲酰基)纤维素(CTNB)、三(4-溴苯甲酰基)纤维素(CTBB)、三(苯甲酰基)纤维素(CTB)、三(4-甲基苯甲酰基)纤维素(CTMB)、三(4-硝基苯甲酰基)纤维素(CTPB).将此类衍生化纤维素作为薄层色谱的手性固定相,结合展开剂的优化,对噻吗洛尔对映体进行拆分研究,并对衍生化取代基对拆分效果的影响以及对映体在手性固定相上的拆分机理进行了详细的探讨.     

纤维素LiCl/DMAc体系的溶液特征

本文研究了纤维素LiCl／DMAc体系的溶液特征。实验结果证明该体系具有良好的时间稳定性和热稳定性，能在常温下近30天内没有明显的粘度降低；在100℃高温下，4h不降解。同时测定了溶液的特性粘数和Huggins常数，Huggins常数在0．4～0．6之间，对比纤维素的铜乙二胺（Cuen）溶液，发现特性粘数[η]LICI/DMAc＞[η]Cuen，无扰尺寸ALiCi／DMAc＞ACuen，可见在LiCl／DMAc体系中，溶剂与纤维素分子表现出更强的相互作用力，分子链充分伸展。该体系的特性粘数、粘度常数不仅与温度、溶剂有关，而且是LiCl浓度的函数，具有与聚电解质溶液相类似的性质。这可能是因为纤维素分子链上的H质子和溶液中的Cl-离子相互作用，而使纤维素分子带上部分电荷，相互排斥而引起的。因此利用M－H方程测分子量，粘度常数的确立必须考虑诸多因素的影响，否则会导致分子量的高估。     

Modification of cellulose fiber with silk sericin

Cellulose fiber surface was modified with silk sericin (or simply, sericin). Sericin fixation on cellulose was confirmed by environmental scanning electron microscopy (ESEM) and Fourier transform infrared spectrophotometry–attenuated total reflectance (FTIR‐ATR). Sericin content in finished samples was estimated by dyeing treated fabrics with an acid dye, Supranol Bordeaux B, and determining K/S and L values of the dyed fabrics. The treated fabrics were tested for free formaldehyde content, crease recovery, tensile strength, electrical resistance, water retention, and biocidal activity. From ESEM and FTIR‐ATR results, it was found that sericin coated onto cotton surfaces as a film. Increasing sericin content in the finishing solution increased the amount of coated sericin, and a greater depth of color in dyed samples and reduced free formaldehyde content in treated samples were observed. The sericin content in samples was found to have a negligible influence on tensile strength and crease recovery angle. With increasing sericin content, electrical resistivity of the samples dramatically decreased and water retention increased, indicating that sericin‐treated fabrics may be comfortable to wear because of its maintenance of moisture balance with respect to human skin. Because cotton textile coated with sericin exhibited low formaldehyde content and no biocidal activity against Klebsiella pneumoniae and Staphylococcus aureus, the fabric may reduce skin irritation and disturbance of physiological skin flora arising from textile contact. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1421–1428, 2005