纤维素醚改性水泥浆的粘度变化研究

增稠是纤维素醚对水泥基材料的重要改性效果。研究了纤维素醚掺量、粘度仪旋转速度和温度对纤维素醚改性水泥浆粘度变化的影响。结果表明:纤维素醚掺量增加,水泥浆的粘度不断增加,纤维素醚溶液和水泥浆的粘度具有"复合叠加效应";纤维素醚改性水泥浆的假塑性低于纯水泥浆,粘度仪的旋转速度越低,或纤维素醚改性水泥浆的粘度越低,或纤维素醚掺量越低,纤维素醚改性水泥浆的假塑性越明显;温度升高,由于温度和水泥水化的共同作用,纤维素醚改性水泥浆的粘度会增加或降低。纤维素醚的种类不同,其改性水泥浆的粘度变化规律存在差异。     

Triethylenetetramine/hydroxyethyl cellulose-functionalized graphene oxide monoliths for the removal of copper and arsenate ions

Nitrogen-doped graphene oxide monoliths (GOMs) were readily constructed by crosslinking graphene oxide (GO) using triethylenetetramine (TETA) and hydroxyethyl cellulose (HEC). The addition of HEC was beneficial to the formation of a network structure compared to that in the absence of HEC. The generated monoliths have shown various morphologies with different d spacing, layer thickness, and micropore size. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses provided evidences for the formation of covalent C–N bonds and some nitrogen-containing heterocyclic composition inside the graphene oxide sheet, indicating that the interaction of GO with the amine crosslinker involved the crosslinking reaction between GO epoxides and amine groups. HEC was also involved in the N-doping reaction via the partial reduction of oxygen in HEC molecules. Analysis of X-ray diffraction (XRD) results indicated that the lattice distance between GO sheets increased after TETA/HEC crosslinking. Thermogravimetric analysis (TGA) confirmed the successful incorporation of crosslinker moieties on the surface of GO sheets. The fabricated GOMs could be used to efficiently adsorb metal ions and arsenate by the introduced polar functional groups on GO sheets and porous structures based on hydrogen bonds, whose morphologies and compositions were confirmed via XRD, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS).     

茶末/CMC-Na/AL-Na复合膜制备及性能测定

目的 为改善传统保鲜膜带来的环境污染问题,开发出具有较好力学性能和抗菌性的食品包装材料提供理论依据。方法 采用海藻酸钠(AL-Na)和羧甲基纤维素钠(CMC-Na)为主要成膜材料,辅助添加茶末通过流延成膜法制备复合膜,以拉伸强度、断裂伸长率等为依据,通过单因素和响应面试验确定茶末/CMC-Na/AL-Na复合膜的最佳工艺。结果 当CMC-Na与AL-Na的体积比为84∶16、茶末添加量为1.43%、干燥温度为50 ℃、干燥时间为7 h时,复合膜综合性能最优,拉伸强度为16.60 N/mm²,断裂伸长率为19.11%,具有较好的力学性能、耐水性、抗氧化性和抑菌性。结论 制备的茶末/ CMC-Na/AL-Na复合膜具有较好的力学性能和抗氧抑菌性能。     

纤维素纤维对透水混凝土性能影响的研究

通过试验研究了纤维素纤维对透水混凝土基本性能的影响。研究表明掺入UF500纤维素纤维后,透水混凝土的7 d抗压强度、抗拉和抗折强度会显著增大,增幅分别达29.52%、34.72%、14.43%;28d抗拉和抗折强度也会显著增大,增幅分别达16.30%、29.89%,但抗压强度几乎不变;透水系数也有所增加。这说明掺入纤维素纤维在不影响透水混凝土的透水性能的情况下,可以显著改善其力学性能。     

CMC在珠光颜料涂布纸中的应用试验

对添加羧甲基纤维素钠改善水性珠光涂布纸云母系列珠光涂料的性质做了初步研究．试验结果表明，羧甲基纤维素钠不仅能改善涂料的稳定性，提高涂层的表面拉毛强度，还能起到辅助胶粘剂的作用．通过优化试验得到了较理想的羧甲基纤维素钠配比．     

磁场对粘胶纤维纺丝原液性能的影响

初步研究了钕铁硼磁性材料在粘胶纤维生产中的应用,结果表明在钕铁硼磁性材料磁场的作用下,粘胶原液的纺丝性能的某些指标发生了改变,磁场对纺丝原液的粘度,熟成度、过滤值以及酯化度都有影响。这一结果为选择合适的磁参数应用于实际的具体生产实践具有指导作用,同时为稀土永磁材料在化学纤维的生产中的应用进行了新的尝试。     

Radiation synthesis of PVP/CMC hydrogels as wound dressing

Carboxymethyl cellulose (CMC) and poly(N-vinyl pyrrolidone) (PVP) were blended to synthesize hydrogels by ⁶⁰Co γ-ray irradiation. A series of hydrogels were prepared with three compositions, i.e. PVP:CMC = 5:5, 6:4 and 7:3. The properties of the hydrogels such as gel fraction, gel strength, swelling behavior and moisture retention were investigated. Compared with pure PVP and CMC hydrogels, PVP/CMC blend hydrogels possessed improved gel strength, flexibility and transparency. As the content of PVP in PVP/CMC blend hydrogels increased, the gel fraction increased while the swelling rate decreased. The hydrogels with optimal properties were obtained in a composition of PVP/CMC = 6/4 with sterilization dose (25 kGy) and further characterized by FT-IR and SEM. Properties concerning the application of wound dressing were performed by comparison with a commercial hydrogel wound dressing to find a similar moisture retention capability and improved swelling rate. The improved properties as well as the cheapness of the materials suggest that PVP/CMC blend hydrogel can be good candidate as wound dressing.     

ZIF-67原位负载纳米纤维素基锂离子电池隔膜的制备及性能研究

本研究以纳米纤维素（CNF）为原料,经乙酰化、原位负载ZIF-67和浸渍电解液制备出一种新型ZIF-67@乙酰化纳米纤维素（ZIF-67@ACNF）锂离子电池隔膜,系统探讨了ZIF-67的粒径对隔膜结构及性能的影响。结果表明,当ZIF-67的粒径从0.46 μm（ZIF-67₄@ACNF隔膜）减小至0.25 μm（ZIF-67₈@ACNF隔膜）时,隔膜的孔隙率从74.2%减小至52.1%,离子电导率从0.75 mS/cm下降至0.22 mS/cm,界面电阻从112.5 Ω增加至1 115.7 Ω,锂离子迁移数从0.41减小至0.31,电化学稳定窗口从5.1 V减小至4.5 V。采用ZIF-67₄@ACNF隔膜组装电池,在室温、0.5 C的条件下进行电池充/放电测试,初始容量达到159.6 mAh/g,循环200圈后容量保持率达到90%。     

表面沉积铜纳米颗粒的细菌纤维素/壳聚糖交联复合膜的制备及其抗菌性能研究

通过戊二醛交联制备了细菌纤维素/壳聚糖复合材料,并采用磁控溅射技术在交联复合膜表面沉积铜(Cu)纳米颗粒。利用扫描电子显微镜观察纳米纤维膜表面形貌,采用傅里叶红外光谱仪、热重分析仪和X射线衍射仪比较交联复合前后以及镀铜前后复合膜基本化学结构、热稳定性和晶面结构的变化。通过能量色散X射线光谱对壳聚糖和铜在复合膜表面的分布情况进行表征。同时借助抗菌实验探究复合膜对金黄色葡萄球菌和大肠杆菌的抗菌能力。结果表明:壳聚糖与细菌纤维素发生了有效交联,改变了细菌纤维素的基本形貌、化学结构、晶体形态以及热学性能,并且镀铜后交联复合膜的抗菌性能得到了明显的提升(膜与细菌接触20min,对金黄色葡萄球菌和大肠杆菌的抗菌效果均达到了99.999%)。