基于EIGamal签名的隐私保护网上交易方案

针对网上交易时的用户个人隐私安全问题,依据不经意传输理论,基于ElGamal签名的不经意签名电子信封(OSBE)模型,提出了一个可保护用户隐私的网上交易数字商品方案.首先用户匿名付费给银行,然后银行将用户订购商品的数字签名发送给用户,接着用户使用数字签名与商家进行不经意信息交互,最后用户得到且只能得到自己订购的数字商品,商家并不知道用户订购何种数字商品.正确性证明和安全性分析结果表明,可以有效地保护用户在网上交易过程中的个人隐私,同时防止商家恶意欺诈行为.该方案签名相对较短,计算量较小,密钥动态变化,安全性更强.     

双渠道供应链中服务对定价和需求的影响研究

研究了集中式决策和基于Stackelberg博弈这两种情况下的双渠道供应链的定价、服务及需求的关系。制造商和零售商提供的服务对价格、需求会产生影响,渠道商改善服务有利于本渠道价格的提高,同时会影响到另一渠道的定价,影响程度与双渠道决策模式相关。与服务对定价的影响不同,渠道商提供的服务对本渠道需求产生的影响是双向的,当服务水平在一定的范围内,改善服务可以增加本渠道市场需求,降低另一渠道需求;当服务水平过高,继续改善服务不仅不能增加需求反而减少需求,同时对另一渠道的需求产生影响,这种影响与消费者市场类型存在密切关系。当消费者市场属于价格敏感型时,服务水平存在一个帕累托区间,任一渠道商改善服务都会促进双渠道需求的增加。     

Silicon‐containing heterocyclic polymers and thin films made therefrom

Thin films, in the range of tens of micrometers thickness, have been prepared by casting onto glass plates the chloroform or N‐methylpyrrolidone solutions of polyimides or poly(imide‐amide)s containing silicon and phenylquinoxaline units in the main chain. The polymers have been synthesized by solution polycondensation reaction of aromatic diamines having preformed phenylquinoxaline rings with bis(3,4‐dicarboxyphenyl)dimethylsilane dianhydride or with a diacid chloride resulting from the reaction of this dianhydride with p‐aminobenzoic acid. The polymers were easily soluble in polar aprotic solvents and showed high thermal stability. The free‐standing films exhibited good mechanical properties with tensile strengths in the range of 48–86 MPa, tensile modulus in the range of 1.25–2.22 GPa and elongation at break in the range of 3–37%. Electrical insulating properties of some polymer films were evaluated on the basis of dielectric constant and dielectric loss and their variation with frequency and temperature. The values of the dielectric constant at 10 kHz were in the range of 2.94–3.08 for polyimides and 3.89–4.49 for poly(imide‐amide)s. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3062–3068, 2006     

新型手性相转移催化剂N-苄基溴化奎宁的合成及应用

通过对天然手性物质进行修饰合成手性相转移催化剂N-苄基溴化奎宁,并对目标分子2,5-二甲基-4-(3-硝基苯)-1,4-二氢吡啶-3-甲酸乙酯-5-甲酸甲酯(nitrendipine)进行不对称催化合成,并通过红外光谱和核磁共振氢谱对化合物进行了表征,用X射线单晶衍射法测定了该化合物的晶体结构。     

FORCED CONVECTIVE MASS TRANSFER IN ANNULI

Mass transfer in annuli has been critically examined for various flow situations. The overall mass transfer rate depends on the hydrodynamic regions prevailing in the annular channel as well as on its dimensions. Theoretically consistent correlations are proposed and recommended for both developed and developing boundary layers under laminar and turbulent flow conditions.     

Studies on polyacrylates containing pendant ligand with carbonyl and hydroxyl functions and their divalent metal complexes

A series of monomers were prepared by reacting (meth)acryloyl chloride with 2,4‐dihydroxybenzophenone, 2,4‐dihydroxybenzaldehyde, and 2,4‐dihydroxyacetophenone, respectively. The monomers were polymerized in dimethylformamide (DMF) at 70°C using benzoyl peroxide as an initiator. Polymer–metal complexes were obtained from DMF solutions of polymers with an aqueous solution of metal ions. The polymers and polymer–metal complexes were characterized by elemental analysis and spectral studies. The IR spectra of these complexes suggest that the metals are coordinated through the oxygen of the carbonyl group and the oxygen of the phenolic–OH group. The electronic spectra, electron paramagnetic resonance (EPR) spectra, and magnetic moments of polychelates showed an octahedral and square planar structure for Ni(II) and Cu(II) complexes, respectively. X‐ray diffraction studies revealed that polychelates are highly crystalline. The thermal and electrical properties, catalytic activity, and structure–property relationships are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2083–2090, 2003     

Novel positive‐working aqueous‐base developable photosensitive polyimide precursors based on diazonaphthoquinone‐capped polyamic esters

Novel positive‐working aqueous‐base developable photosensitive polyimide (PSPI) precursors based on partially diazonaphthoquinone (DNQ)‐capped polyamic esters bearing phenolic hydroxyl groups and a DNQ photosensitive compound (PIC‐3) were developed. The partially DNQ capped polyamic esters were prepared from an esterification reaction of 1,2‐naphthoquinone diazide‐5‐sulfonyl chloride with the polyamic esters. The partially DNQ capped polyamic esters decreased the dark film loss effectively in the aqueous‐base developer and were able to make thicker film resists compared to the uncapped polyamic esters. The 25 mol % DNQ‐capped BisAPAF–PMDA polyamic ester and BisAPAF–ODPA polyamic ester containing 25 wt % PIC‐3 photosensitive compound showed a sensitivity of 176 and 185 mJ/cm², and a contrast of 1.68 and 1.02, respectively, in a 3‐μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 5 μm was obtained from both PSPI precursor compositions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2293–2300, 2003     

Compounding and injection molding of polybutene‐1/polypropylene blends

The effect of shear‐controlled orientation injection molding (SCORIM) was investigated for polybutene‐1/polypropylene blends. This article reports on the methods and processing conditions used for blending and injection molding. The properties of SCORIM moldings are compared with those of conventional moldings. SCORIM is based on the application of specific macroscopic shears to a solidifying melt. The multiple shear action enhances molecular alignment. The moldings were investigated with mechanical tests, differential scanning calorimetry studies, and polarized light microscopy. The application of SCORIM improved Young's modulus and the ultimate tensile strength. The gain in stiffness was greater for higher polybutene‐1 content blends. A drastic decrease in the strain at break and toughness was observed in SCORIM moldings. The enhanced molecular orientation of SCORIM moldings resulted in a featureless appearance of the morphology. Interfacial features due to segregation were visible in the micrographs of SCORIM moldings. Both conventional and SCORIM moldings exhibited form I′ in polybutene‐1. This article explains the relationship between the mechanical properties and micromorphologies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 806–813, 2003     

Hydrogen Production from Partial Oxidation and Steam Reforming of N‐octane Over Alumina‐supported Ni and Ni‐Pd Catalysts

Hydrogen production by partial oxidation and steam reforming (POSR) of n‐octane was investigated over alumina‐supported Ni and Ni‐Pd catalysts. It showed that Ni‐Pd/Al₂O₃ had higher activity and hydrogen selectivity than the nickel catalyst under the experimental conditions, which indicated Ni‐Pd/Al₂O₃ could be an effective catalyst for the production of hydrogen from hydrocarbons.