A comparison of backpropagation and general regression neural networks in quantative trace metal analysis using anodic stripping voltammetry and cybernetic instrumentation

A comparison is made between backpropagation and general regression neural networks for the prediction of parts per billion lead concentration when used to process data obtained from digested curry powder by the electrochemical analysis method of differential pulse, anodic stripping at a thin film mercury electrode (TFME). Two data sets are used, one requiring the net to classify an unknown analytical data vector into one of a number of previously learnt concentrations, and one requiring the net to predict the probable concentration of an unknown sample by interpolation of the already learnt concentrations. For both of these data sets the general regression neural network is shown to train faster and to provide results superior to those obtained by backpropagation.     

填料萃取塔液泛速度的计算

介绍了三种有代表性的填料萃取塔的液泛速度计算公式，并通过它们用于三种典型的液-液实验体系和两种不同填料的计算结果的比较，对这些公式的适用范围进行了讨论。     

在教学中推行微型化学实验势在必行

微型化学实验是当今化学教学中的重要变革之一。本文简单介绍了微型化学实验的特点和当前国内外发展的概况，倡议在我省的化学中尽快推行微型化学实验     

Improvement of the optical properties of electrodeposited CuInSe2 thin films by thermal and chemical treatments

Cu, In and Se have been codeposited in thin films by potentiostatic one-step electrodeposition. The as-deposited material has shown direct optical transitions attributable to the CuInSe₂ semiconductor, but also additional absorption corresponding to another semimetallic phase. The secondary phases are selenium and copper selenide compounds which have been determined by composition measurements. In order to eliminate the semimetallic phases and to improve the semiconductor behaviour of the electrodeposited material, thermal and chemical treatments have been performed. After heat-treatment of the samples at 400°C in flowing argon, elemental selenium loss has been detected together with an enhancement of the allowed direct optical transition. The subsequent chemical etching of the layers in a KCN solution has showed to be successful in eliminating the copper selenide phases which were responsible of the remaining sub-bandgap absorption.     

计算机软件在多媒体化学教育中的应用

本文阐述了计算机软件在多媒体化学课件开发中的应用，着重介绍了一些普通软件及专业化学软件的特点及功能。     

尖晶石型纳米钴蓝陶瓷颜料的制备

采用化学共沉淀法作为钴蓝颜料的制备方法,探讨了主要工艺因素对制备钴蓝颜料性能的影响,对制备的样品进行了测试与表征。结果表明:Co2+和Al3+物质的量比为1∶2.5时,制备的钴蓝样品颜色饱和度与明度最高,沉淀剂为尿素时制得的样品的粒度最小,粒度分布比较均匀。前驱体的洗涤过程采取水洗加醇洗的方法可有效减少样品的硬团聚现象,且前驱体的最佳煅烧温度为950℃左右。     

稳定同位素井间示踪技术在深层块状稠油油藏水驱特征研究的应用

经对冷43块深层块状普通稠油水驱注水5个试验井组开展的稳定同位素示踪测试，利用中子活化技术分析样品，采用先进的示踪剂定量分析与流动模拟相互结合的方法，以示踪数值模拟为手段，评价了油井连通、油层平面及纵向上的非均质性、隔层的封隔性等因素对水驱控制程度及动用状况的影响，通过优化注水推进方向及速度，强化动态调整措施，提高了稳产基础。     

炼油化工装置技术改造的决策与实施

针对炼油和石化工业装置技术改造的特点，系统地总结了技术改造的类型和改造方案的制定、决策及实施的原则、程序和方法，指出对炼化装置实施技术改造是一项极其复杂、极具难度的系统工程，必须结合实际情况，以投资回报最大化为原则，通过深入细致地研究和反复比选优化改造方案，并结合现场情况制定切实、可靠、安全的实施方案。     

唐钢ER70S-6焊丝钢的生产工艺研究及质量分析

介绍了唐钢ER70S-6焊丝钢的特点，对盘条质量进行了分析。对该钢化学成分、冶炼和轧制工艺进行了优化研究，使其综合性能明显改善。     

Irradiation of large area Mylar membrane and characterization of nuclear track filter

Ion irradiation of Si⁸⁺ ion beam of 100 MeV was scattered by a gold foil on a Mylar membrane of 25 Μm thickness in the form of film roll (width, 12.5 cm and length, 400 cm) at the Nuclear Science Centre, New Delhi. The characterization of etched nuclear tracks was carried out by gas permeation measurements. The samples cut from the film roll of required size for permeability measurements were etched in a controlled manner in a constant temperature bath of 6N NaOH solution. The opening of the conical etched tracks was characterized by hydrogen gas permeation.