Machining with tool–chip contact on the tool secondary rake face—Part II: analysis and discussion

The forces, chip thickness, and natural tool–chip contact length in machining with a double-rake-angled tool are predicted in Part II of the present study. It is revealed that in comparison with a single-rake-angled tool, a double-rake-angled tool increases the forces, especially the thrust force. However, the increase in chip thickness and tool–chip contact length is not significant under the input conditions specified in the present study. The effect of seven input variables of the proposed model is quantitatively investigated. The predicted variations of forces, chip thickness, and natural tool–chip contact length are in good agreement with theoretical and experimental results obtained by other researchers. The interrelationships among the resultant force, the chip thickness, and the natural tool–chip contact length are established, which provides a new and promising method to estimate the tool–chip contact length by employing the resultant force. It is demonstrated that the model can also be extended to study the problem of machining with a groove-type chip breaker tool.     

微控制器与嵌入式RISC处理器的发展现状

综述了新一代微控制器与嵌入式RISC处理器的主要特点和发展方向；详细介绍了目前国内外最流行的不同字长的系列机种、结构特点、专有特性及系统应用等；最后预测了它们的世界销售市场与国内发展前景。     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。     

A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

Ubiquitous Information Services with JAIN Platform

To provide responsive information services in a ubiquitous computing environment, service software and system development are indispensable. A component-based ubiquitous information system with a JAIN (Java APIs for Integrated Networks) platform to achieve seamless transmissions and reach-everywhere communications was designed in our research. In this development, numerous ubiquitous service modules were identified: location management, roaming, mobile IP and WAP networking. These component-based network modules were constructed using a component composition language with component specification and interface definition, running on top of a distributed service architecture using a JAIN platform to distribute the ubiquitous information services to mobile users. Two applications, Wireless-Application-Protocol (WAP) Mail and Video-on-Demand (VoD) services, show that the JAIN-like platform with the developed networking components effectively fills the gap for application developers between mobile appliances and various kinds of ubiquitous information services.     

Use of ultrafiltration for preparing improved tomato pulp

The characteristics of high-quality tomato pulp (commercial def.: crushed or diced tomatoes with about 30% tomato juice as packing medium) canned with tomato juice pulp enriched by ultrafiltration as packing medium were compared with those covered with conventional vacuum-concentrated juice.
Both hot- and cold-break products were prepared and those containing 20% serum-reduced packing juice proved to be the best, showing no signs of syneresis on storage and with improvements in sensory properties, colour and non-enzymatic browning; some volatile components were reduced.     

从数字看发展片式电容器面临的机遇与挑战

采用海关进、出口统计和行业生产统计资料,通过计算、分析,用数字来说明国内发展片式多层陶瓷电容器、片式钽电解电容器、片式铝电解电容器、片式有机薄膜电容器所面临的机遇与挑战,并对其国内市场需求总量、额,国产品在国内市场占有率等做出评估,为有关单位了解片式电容器的发展提供参考,为国产产品更有效地进入国内市场、促进其发展提供依据。     

Linguistic Knowledge, Processing Speed, and Metacognitive Knowledge in First- and Second-Language Reading Comprehension: A Componential Analysis.

The authors report results of a study into the role of components of first-language (L1; Dutch) and second-language (L2; English) reading comprehension. Differences in the contributions of components of L1 and L2 reading comprehension are analyzed, in particular processing speed in L1 and L2. Findings indicate that regression weights of the L1 and L2 components are different. Although correlations between most processing speed components and reading comprehension are substantial, there are no unique contributions to the explanation of either L1 or L2 reading comprehension when linguistic and metacognitive knowledge are accounted for. In addition, L1 reading comprehension is shown to have a large contribution to L2 reading comprehension, supporting theories of L1-L2 transfer of reading skills. Results are discussed from a developmental perspective. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

双组分树脂冷压法制备摩擦材料

研究甲、乙双组分液体树脂作为粘结剂制备制动摩擦材料的冷压工艺方法，甲组分树脂为硼改性腰果壳油树脂，乙组分树脂为三聚氰胺改性酚醛树脂。该工艺可使模压料在室温下具有良好的成型效果，在固化处理中不使用夹具，可以使成型料具有良好的保型效果。冷压制备的制动摩擦材料具有硬度低、摩擦系数稳定和恢复性好等特点。     

PCR芯片和生化微分析系统

介绍了PCR微芯片的最新研究进展,给出了不同结构的PCR芯片设计原理以及特点,介绍由PCR芯片为主要单元的集成微全分析系统的相关研究,同时简要介绍了对PCR的仿真模拟等。