弹药内弹道性能检验新方法数学模型的建立

本文对弹药内弹道性能检验的传统方法存在的问题进行了分析,提出了一种新的检验方法,重点对新的检验方法的数学模型的建立过程进行了论述。并对数学模型的精度进行了分析、检验和验证。     

聚电解质溶液分子热力学模型

<正>链状聚电解质由于是长链大分子又有很高的电荷密度,其溶液即使在极低的浓度下仍具有很强的负偏差,与Debye-Huckel理论预测的结果相去甚远。工程上使用的Manning模型认为聚离子的电荷密度有一临界值,当超过临界值时,反离子即凝聚在聚离子表面使其实际电荷密度降至临界值。Nagvekar等在该模型的基础上引入NRTL方程,以计及短程相互作用的贡献。Manning等的方法虽然有一定的物理意义,但临界值的确定缺乏可靠的根据。     

WTG420铁路罐车用钢的组织结构和力学性能分析

分析了ＷＴＧ４２０铁路罐车用钢的组织结构和力学性能。提出了冶炼与轧制的技术关键，其一，添加稀土元素改善钢中夹杂物；其二，采用控轧控冷使铁素体晶粒细化。     

多人决策的一类相对均衡解

本文分析由于决策人偏好不同而引起决策差异的多人多目标决策问题，提出了这类决策问题的一类相对均衡解的概念和求取方法。相对均衡解以决策群体偏好的加权集结为基础，能最大程度地反映每个决策人的偏好。文中研究相对均衡解的ＳＷＴ求取方法，并给出了求解的步骤。     

Saturated liquid viscosities and densities of environmentally acceptable hydrochlorofluorocarbons (HCFCs)

Measurements of saturated liquid viscosities and densities were performed on environmentally acceptable hydrochlorofluorocarbons (HCFCs), CH₃CCl₂F (HCFC-141b), CH₃CClF₂ (HCFC-142b; only for viscosity), CF₃CF₂CHCl₂ (HCFC-225ca), and CClF₂CF₂CHClF (HCFC-225cb), using a capillary viscometer and a glass pycnometer in the temperature range from 273 to 353 K. The uncertainty in the measurement of viscosity is estimated to be 5% based on the comparison of the present data with those in the literature for HCFC-141b. An equation is given to represent our saturated liquid viscosity data as a function of temperature.     

Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

The viscosity of liquid water at pressures up to 32 MPa

The paper reports new, preliminary measurements of the viscosity of liquid water along two isotherms as a function of pressure up to 32 MPa. The measurements have been performed with a vibrating-wire viscometer especially modified for the purpose. The instrument has been calibrated with respect to the viscosity of water at a pressure of 0.1 MPa and a temperature of 293.15 K, for which an accurate reference value is available. With due regard to the precision of the determination of individual quantities and the accuracy of the calibration data, it is estimated that the accuracy of the present results is one of ±0.3% under all conditions.Paper dedicated to Professor Joseph Kestin.     

A computational model for analysing interactive buckling and delamination growth in composite structures

In this paper, a unified method is presented: (i) to model delaminated stiffened laminated composite shells; (ii) for synthesising accurate multiple post-buckling solution paths under compressive loading; and (iii) for predicting delamination growth. A multi-domain modelling technique is used for modelling the delaminated stiffened shell structures. Error-free geometrically nonlinear element formulations — a 2-noded curved stiffener element (BEAM2) and a 3-noded shell element (SHELL3) — are used for the finite element analysis. An accurate and simple automated solution strategy based on Newton type iterations is used for predicting the general geometrically nonlinear and postbuckling behaviour of structures. A simple method derived from the 3-dimensionalJ-integral is used for computing the pointwise energy release rate at the delamination front in the plate/shell models. Finally, the influence of post-buckling structural behaviour and the delamination growth on each other has been demonstrated.     

超高压输电线路分裂导线通道模式理论分析

本对分裂导线传输电磁波的模式理论进行了分析，从所解特征根中选择一组最简单的模分量传递信息，并阐述了传输规律。     

圆筒混合机振动和粘漏料问题及解决办法

对圆筒混合机长期未得彻底解决的振动、大型零部件寿命短、筒体内壁粘料、进料漏斗堵料与漏料等问题进行了原因分析；根据宝钢烧结分厂的实践经验提出了解决办法。