Antimicrobial finishing of regular and modified polyethylene terephthalate fabrics

An effective two-stage method has been developed for imparting antimicrobial properties to regular polyethylene terephthalate (R-PET), polyethylene glycol modified polyethylene terephthalate (PEG-M-PET), R-PET/Cotton blend (R-PET/C) and PEG-M-PET/Cotton blend (PEG-M-PET/C) fabrics. The method consists of partial hydrolysis of the fabrics to create carboxylic groups in PET macromolecules followed by subsequent reaction with dimethylalkylbenzyl ammonium chloride (DMABAC) under alkaline conditions. The reaction conditions such as pH, reaction temperature and time, carboxylic content, and DMABAC concentration were studied. Characterization of the finished fabrics was carried out through scanning electron microscopy (SEM) and Fourier transform infrared spectra (FTIR). All the modified PET fabrics showed excellent antibacterial activity towards Gram-positive (Bacillus mycoides), Gram-negative (Escherichia coli), and nonfilamentous fungus (Candida albicans). The achieved antimicrobial functions on the PET fabrics are durable in repeated laundering processes. Even after laundering 10 times the fabrics could still provide more than 85% of its antimicrobial activity against B. mycoides, E. coli, and C. albicans. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

瓶级聚酯切片中乙醛含量的控制

对瓶级聚对苯二甲酸乙二酯(PET)原料中的乙醛含量、第三组份(间苯二甲酸)含量、原料比表面积以及工艺参数控制等对产品中乙醛含量的影响进行了讨论，得出了合适的工艺操作条件，并注意到预结晶单元和冷却单元的工艺参数控制对产品乙醛含量的影响最显著，从而为生产乙醛含量小于1．0μg/g的瓶级高粘度PET切片提供了参考。     

聚烯烃塑料改性的研究进展

聚乙烯、聚丙烯以优良的力学性能、热性能、加工性能等成为最主要的聚烯烃塑料品种,大量用于生产薄膜、管材和板材。通过改性可获得高刚性、高强度、高耐热、低成本的聚烯烃塑料。综述了近年来聚乙烯和聚丙烯在接枝、交联、填充、共混等方面的改性进展,并指出了研究方向和发展趋势。     

HDPE的耐磨蚀性与抗冲击性的研究

用自制的旋臂式磨蚀实验仪，研究了５种高密度聚乙烯和１种顺丁橡胶改性的高密度聚乙烯，在铁尾矿和铁精矿浆体中的耐磨蚀性。耐磨蚀性最差的是ＨＤＰＥ２２００Ｊ，耐磨蚀性较差的是ＨＤＰＥ６３００Ｍ；ＨＤＰＥ５０００ｓ，６０９８和２４８０的耐磨蚀性较好；ＨＤＰＥ／ｃｉｓ－ＢＲ的耐磨蚀性最好。     

HDPE／PA6共混型塑料阻隔材料

以自制接枝聚乙烯为增容剂，高密度聚乙烯为基材，尼龙６为阻隔材料，用挤出法，制取ＨＤＰＥ／ＰＡ６共混材料。ＭＰＥ的加入，增大了相间的粘接改善了力学性能，使材料具有良好的阻渗性能。     

MCS接枝共聚物的结构和形态

将甲基丙烯酸甲酯（ＭＭＡ）、苯乙烯（Ｓ）在氯化聚乙烯（ＣＰＥ）存在下进行悬浮接枝共聚，获得ＭＣＳ树脂。本文着重考察了ＭＣＳ树脂的化学结构及胶粒形态。结果表明，确实发生了接枝共聚。ＣＰＥ用量、ＲＳＨ含量、引发剂浓度、反应温度、溶胀时间及聚合转化率对ＭＣＳ树脂的接枝率、接枝效率均有影响。ＭＣＳ树脂是接枝共聚物、ＭＭＡ／Ｓ共聚物与ＭＭＡ均聚物的混合物，橡胶相ＣＰＥ在ＭＣＳ树脂中的分散情况为“海岛结构”，     

动态交联热塑性弹性体增韧聚丙烯合金

用动态交联方法制备聚烯烃热塑性弹性体（ＴＰＯ）增韧聚丙烯，制备了具有低温冲击性能良好、综合力学性能比较均衡的聚丙烯合金。同时，研究了ＴＰＯ组成、工艺及基体组成与ＴＰＯ增韧聚丙烯共混物力学性能的关系。并通过差热扫描量热计和扫描电镜考察了共混物的形态结构。     

聚乙烯接枝改性及其与铝的粘结性

聚乙烯在过氧化二异丙苯存在下分别与丙烯酸，顺丁烯酸酐，顺丁烯二酸，顺丁烯二酸钠，丙烯酸羧丙酯，甲基丙烯酸环丙酯等单体熔融挤出，产物的红外光谱表明聚乙烯不同程度地接了各种极性基团。     

The melting points of ultralong paraffins and their homologues

Because of the recent availability of the melting points of several ultralong normal paraffins, the melting behavior of normal paraffins has been investigated. Taking the melting point of polyethylene to represent the melting point of an ultralong paraffin, a new function has been established to represent the melting points of alkanes from the carbon number 32 onwards. Adopting the same value for the limiting melting point of an ultralong paraffin, equations are derived for the melting points of several homologous series.Nomenclature a A constant to be determined - b A constant to be determined - m Number of methylene groups in the molecule - n Number of carbon atoms in the molecule - n ^* Number of carbon atom above which Eq. (6) is applicable - T ₀ Temperature constant, K - T _c Critical temperature, K - T _c Critical temperature of an ultralong normal paraffin, K - T _b Normal boiling point, K - T _b Normal boiling point of an ultralong normal paraffin, K - T _m Melting point, K - T _m Melting point of an ultralong paraffin, K - Standard deviation {[(T _m (obsd)–T _m (calc)]²/(No. points–No. parameters)}^0.5     

液相化学还原法制备不同形貌的多晶纳米镍

采用液相化学还原法,在1,2-丙二醇体系中,分别使用吐温-80（Tween-80）、聚乙二醇-6000（PEG-6000）和十二烷基硫酸钠（SDS）与聚乙二醇-6000（PEG-6000）的混合物作为修饰剂,利用1,2-丙二醇还原相同母体醋酸镍,制备形貌分别为海绵体、纤维状、雪花状的多晶纳米镍;在水体系中,使用SDS为修饰剂,利用水合肼还原相同母体醋酸镍,制备球形多晶纳米镍。通过X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）对纳米镍进行表征。利用傅立叶红外（FTIR）分析初步解释不同形貌纳米镍的形成机理。