纺丝组件三甘醇清洗系统的改造

介绍了三甘醇 (TEG)清洗系统的工艺流程和所存在的主要问题是自然冷却时间太长和TEG蒸气泄漏。提出该系统的改造方案为变自然冷却为强制风冷 ,把清洗釜盖的密封改为榫槽式 ,使改造后的TEG清洗系统达到了国际通用的HSE(健康、安全、环境 )的标准 ,缩短了TEG清洗后的冷却时间 ,罐体密封更加严密 ,清洗快捷、方便     

常温清洁铁系磷化液研究

为使磷化实现一级清洁生产,开发了一种用于钢铁表面涂装前处理的常温清洁铁系磷化液。该磷化液组分所有的成分均参加成膜反应生成磷化膜、水、沉渣或在磷化膜干燥过程中挥发。此磷化液不含亚硝酸盐和重金属,在5~40℃下浸渍磷化5~10 m in,在每平方米即可生成质量约为0.7 g的膜和耐CuSO4溶液点滴时间达90~140 s的彩色磷化膜。且磷化后可免水洗。     

中央空调的水处理

本文扼要介绍了中央空调循环冷却水和冷冻水系统中常见的问题及其原因,并对冷却水和冷冻水的处理程序作了初步的阐述.     

脱硫吸附剂与吸附脱硫技术

综述了国内外原料气和燃料油吸附脱硫技术在吸附脱硫材料和吸附脱硫工艺方面的研究与开发进展。介绍了分子筛类、金属氧化物类、活性炭类等脱硫吸附剂。分别评述了物理吸附、活化吸附、选择性吸附等燃料油吸附脱硫技术的机理和工艺。     

聚醚砜膜原位清洗方法的实验研究

实验对已污染的聚醚砜膜进行了清洗的研究,并通过测量各种清洗剂清洗后膜水通量的恢复,确定适宜的清洗剂、清洗时间、清洗液浓度和操作压力,选择出最佳的清洗方案,取得较好的清洗效果。通过研究表明:被污染的聚醚砜膜用混合清洗剂清洗恢复率可达到85%,效果要明显优于单一的清洗方法。     

低氟含量低表面能自清洁氟碳涂料的研究

以氟单体和丙烯酸酯类单体通过聚合物的分子结构设计，合成了一类总氟含量不超过12％的低氟含量的含氟丙烯酸树脂，所制备的氟碳涂料的涂层的表面能低，具有自清洁功能。分析了该涂层中极性与非极性官能团的分子取向机理，测定了纯水水珠在不同含氟单体均聚物和共聚物清漆漆膜上以及在含氟丙烯酸树脂涂层上的接触角，探明了含氟丙烯酸树脂涂层的总氟含量与表面能的关系、含氟官能团在涂层中的分布，探讨了低氟含量的含氟丙烯酸树脂涂料的涂层自清洁机理。     

Pattern recognition for characterization of pharmaceutical powders

A large part of pharmaceutical manufacturing involves the use of particulate materials. It is well known that both particle size and shape affect the physical characteristics of tablets. An image processing and analysis algorithm based on the invariant image moment technique was developed in this work to determine the particle shape by comparing features (moments) extracted from templates to those extracted from each of the objects in the image. First it determines the particle shape (rectangle, circle, etc.) and then calculates its specific dimensions (diameter, aspect ratio).The statistical validation of the vision system obtained a repeatability of 0.0012 in and 0.5% relative standard deviation and accuracy within 0.1 to 0.9% of the average value considered as true value. Also the pattern recognition technique indicated high precision and accuracy for images containing particles with some level of contact between them. The shape recognition of microcrystalline cellulose (MCC) indicated that particles of equant and acicular shape as defined by USP are predominant. The results suggest that image processing and analysis would be a suitable tool for pharmaceutical process analytical technologies (PAT) and process optimization.     

Alternative technologies for biotechnological fuel ethanol manufacturing

The challenges of implementing biorefineries on a global scale include socioeconomic, financial, and technological constraints. In particular, the development of biorefineries is tightly linked to the continued availability of fermentation raw materials. These constraints can be relaxed by the use of diverse raw materials, while advances that confer higher flexibility would enable biotechnological plant managers to swiftly react to volatile markets. In conventional processes, Saccharomyces cerevisiae grows on a relatively limited range of substrates, and produces only a single product—ethanol. Given the observed maturity of the S. cerevisiae fermentation technology, alternatives to baker's yeast may be needed to tip the economic balance in favour of biotechnological ethanol. These alternative fermentation technologies may allow a greater diversity of substrates to be used to produce an individually tailored mix of ethanol and other chemicals. Copyright © 2007 Society of Chemical Industry     

中央空调制冷机的化学清洗

阐述了中央空调制冷机结垢的类型及其产生的原因和危害,分析了中央空调制冷机的冷媒水系统、冷却水系统的化学清洗技术和操作方法.     

秦安县农村户用改进型沼气池建造的关键技术

近年来,随着我县农村户用沼气建设力度的不断加大,为缓解我县能源资源短缺的现状,通过对农村户用沼气池施工技术及工艺的改进,进行技术集成示范,总结出秦安农村户用改进型沼气池的建造技术,为该地区沼气事业的发展提供科学依据.