Combined application of electrolysed water and ultrasound to improve the sanitation of knives in the meat industry

This study investigated the effect of the combination of basic electrolysed water (BEW) and slightly acid electrolysed water (SAEW) with ultrasound (US) for cleaning and sanitation of the knives used in slaughtering processes. The knives were sonicated in a US bath using two modes of operation (normal and sweep) in two steps: (i) 5 min with BEW and (ii) 10 min with SAEW at 35 °C. The microbiological counts and the possible changes in the physical structure of the knives were evaluated. The association BEW + SAEW + US, in the sweep mode, provided lower mesophilic, enterobacterial, Staphylococcus aureus and yeast counts when compared to the values recommended by the international legislation. In addition, these conditions removed all organic residues from the knife blades and promoted the highest migration rate of the residues to the US water bath (12.35 mg/L·min), without modifications in the knife blades. Thus, cleaning and sanitation of knives was feasible with the association of BEW + SAEW + US, which could be a useful alternative for the meat industry.     

Identification of potential technologies for 1,4-Butanediol production using prospecting methodology

1,4-Butanediol (1,4-BDO) is a four-carbon diol used for industrial applications such as organic solvents, and the production of adhesives, fibers and polyurethanes. 1,4-BDO currently is produced through several petrochemical routes: hydrogenation of maleic anhydride, isomerization of propylene oxide, acetoxylation of butadiene, and the reaction between formaldehyde and acetylene. The current trends in 1,4-BDO production involve the utilization of renewable sources such as biomass. In this context, the present study aimed to identify promising technologies of 1,4-BDO production through prospecting methodology based on the analyses of patents and scientific article, describing the most relevant aspects of those emerging technologies. An increasing amount of 1,4-BDO production focused on biotechnological routes has been reported, with the US heavily involved in the development of new technologies. This study tracked three promising technologies which have potential for application in a biorefinery context because those processes involve (i) production of 1,4-BDO from sugars, classified herein as the biotechnological route; (ii) production of intermediates from sugar fermentation followed by catalytic conversion into 1,4-BDO, classified herein as the hybrid route, and (iii) furan/furfural conversion into 1,4-BDO. © 2020 Society of Chemical Industry     

熟料库清库门的几种设计方案

很多熟料库在设计时未注意清库门的设置，或者是设计的清库门不合理从而给施工和后期的实际使用造成很多麻烦。本文介绍了几种熟料清库门的几种设计方案，对比了其设计方式，设计要点及优缺点，为熟料库设计提供了有益的思路。     

Foam-based cleaning of surfaces contaminated with mixtures of oil and soot

Liquid foams of intermediate stability have been shown to be very efficient in the cleaning of sensitive surfaces because of the synergy between imbibition and foam decay. While we quantified these mechanisms for contaminations with liquid oils in our previous work, we show here their extension to oils containing soot particles in an effort to simulate increasingly realistic contaminations. Using foams with a wide range of liquid fractions and with different stabilities, we show that the main cleaning mechanisms remain very similar, with the oil entraining the soot particles. However, we find much less efficient soot removal when the liquid channels of the foams are small enough to hinder efficient transport of the soot particles.     

岳纸PM8 Optisizer生产实践

Optisizer在生产实践过程中的维护和操作控制关系到其是否正常稳定运行,本文主要介绍了施胶辊更换后的调试和断纸后的操作注意事项,以及运行过程中存在的亮线问题的一些探讨。     

Quaternäre Metall/Metalloxid‐Katalysatoren als Wandkatalysatoren in Mikroreaktoren für Power‐to‐Gas‐Applikationen mittels kombinatorischer Hochdurchsatzmethoden

Catalysts of quaternary composition have been prepared and tested for the Sabatier process. For catalyst syntheses the following techniques have been used: sol‐gel methods, wet impregnation and incipient wetness impregnation. The Sabatier reaction was carried out at temperatures between 520 K and 670 K, pressures of 15 bar and 30 bar using a mixture H₂:CO₂ of 4:1. Activity screening of the microscale wall catalysts was performed by a custom‐built 10‐fold parallel gas‐flow microreactor setup in sequential operating mode. To analyze the gas phase compositions GC‐FID was used.     

Supporting hydrogen technologies deployment in EU regions and Member States: The Smart Specialisation Platform on Energy (S3PEnergy)

In order to maximise European, national and regional research and innovation potential the European Union is investing in these fields through different funding mechanisms such as the ESIF or H2020 programme. This investment plan is part of the European 2020 strategy, where the concept of Smart Specialisation is also included.Smart Specialisation is an innovation policy concept designed to promote the efficient and effective use of public investment in regional innovation in order to achieve economic growth. The Smart Specialisation Platform was created to support this concept by assisting regions and Member States in developing, implementing and reviewing their research and innovation Smart Specialisation strategies.The Smart Specialisation Platform comprises several thematic platforms. The thematic Smart Specialisation Platform on energy (S3PEnergy) is a joint initiative of three European Commission services: DG REGIO, DG ENER, and the Joint Research Centre (JRC). The main objective of the S3PEnergy is to support the optimal and effective uptake of the Cohesion Policy funds for energy, and to better align energy innovation activities at national, local and regional level through the identification of the technologies and innovative solutions that support in the most cost-effective way the EU energy policy priorities.In the particular case of hydrogen technologies, the activities of the platform are mainly focused on supporting the new Fuel Cells and Hydrogen Joint Undertaking (FCH JU) initiative involving regions and cities. To date, more than 80 European cities and regions have committed to participate in this initiative through the signature of a Memorandum of Understanding, and more participants are expected to join. S3PEnergy is helping in the identification of potential combination of H2020 funding (provided through FCH JU) and ESIF.To identify potential synergies among these two funding sources, a mapping of the different ESIF opportunities has been performed. In order to map these opportunities, Operational Programmes (OPs) and research and innovation strategies for Smart Specialisation (RIS3) of the different European regions and Member States were analysed. The results of this mapping and analysis are presented in this paper.     

ICT and cities revisited

This paper tests whether or not adoption of information and communication technologies (ICT) has offset agglomeration benefits and led to more dispersed spatial structures worldwide. The paper returns to Ioannides et al. (2008) and confirms, first by relying on the Pareto (Zipf) coefficient of the city size distribution as a proxy of spatial dispersion, that the diffusion of fixed telephony has caused more dispersed urban structures worldwide, in other words, greater urban decentralization. Similar causal effects are established for mobile telephony, which are novel, and the internet, which extend previous research. They are confirmed for such alternative measures of dispersion as the Gini coefficient, the Herfindahl index, and the coefficient of variation.     

The co-learning process in healthcare professionals: Assessing user satisfaction in virtual communities of practice

Communities of practice are nowadays an important concept in the healthcare sector. Particularly, the intensive use of ICT has allowed their creation into a virtual environment – Virtual Communities of Practice (VCoPs) developing optimal conditions to make possible the collaborative learning process. The VCoPs antecedents can be situated on social network phenomenon, where individuals with different traits but a common interest/objective are linked, use ICT potency (especially social media) to interchange information, experiences and contents among them. And as a result, people create and share knowledge, and learn collaboratively. VCoP users have a higher satisfaction level in the collaborative learning process when they can: (1) Achieve benefits related to patient diagnosis and treatment (cost reductions, faster management, quality and accuracy of diagnosis, etc.); (2) Increase the share capital of participants and creating networks of trusted individuals. Given the interest in this topic, the objective of this work is to identify the factors that determine user satisfaction in relation to Community Practice (CoP) and the process of building shared knowledge. For this, a sample of 130 Spanish health professionals participating in an online community, and developed in a virtual community of practice, is discussed. The results obtained from an analysis of logistic regression show evidence of the perception of efficiency and effectiveness in collaboration with the members of the VCoP as positively influencing the perceived satisfaction with the CoP. Also, the degree of individual participation in the community affects the degree of perceived satisfaction. The conclusions provide interesting strategic recommendations in the management process of the CoP.