Psychological Bulletin's top 10 "hit parade."

Examined the 10 most cited articles published in the Psychological Bulletin over the past 4 decades. Seven of the 10 articles were methodologically oriented. A survey of the authors revealed that highly cited articles have an important message that goes beyond momentary fads, are broad in topic and intended audience, accessible, and well written. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Citations do not solve problems.

D. T. Cambell and D. W. Fiske (1959) made the now-obvious statement that measures of the same variable made by different methods should agree (converge) and certainly should agree better than measures of different variables made by those several methods. Almost everyone accepted that statement, yet the multitrait–multimethod matrices published today show little or no improvement over the published examples cited in 1959. The article raised the conceptual problem of how a variable and its measurement should be linked and the methodological problem of clarifying the nature of methods and their effects. Given these unresolved problems, it is perhaps not surprising that the question of the appropriate statistical analysis of these matrices has also no consensual answer. Perhaps methods and traits or contents are so thoroughly intertwined that their interaction cannot be adequately analyzed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

电子和β射线两用外推电离室的研制

本文研制了一台测量电子束和β射线吸收剂量的外推电离室,其空腔室壁材料可拆换并分别与空气、组织和硅等效,收集电极名义直径为1.5、3、10和30mm,空气空腔可变范围为0.2～15mm。该外推电离室具有在空腔内部测温,自动改变窗口上方材料厚度及采用微型计算机控制等特点。适用于测10 MeV能量以下,剂量率为10~5～10~(-3)Gy/h的电子或β射线吸收剂量。整个外推电离室自动测剂量系统在测~(204)TLβ放射源表面剂量率的不确定度为2.3％。测1.5 MeV电子束在硅和哈密瓜深部剂量率时,不确定度分别为4.0％和2.8％。     

高等教育服务承诺与政府规制改革

高等教育服务是一个具有时代特征的历史现象 ,在当前显露出全球化背景下经济行为与文化行为互动性特征 ,站在综合国力提升和国际竞争力增强的战略高度审视高等教育服务贸易的长远影响至关重要。通过政府规制改革 ,建立起本国能够负责任地采纳并被其他成员国创造性地适应的高等教育及其服务贸易发展模式是各国政府的重要责任     

试论我国解放后炼铁技术路线

本文简要回顾建国以来我国炼铁技术路线的演变过程，并展望２１世纪的前景。     

冷却器盘管失效分析及防范措施

本文介绍了冷却器盘管破裂泄漏的情况，分析了失效破坏的原因，并提出防止冷却器盘管破裂泄漏的措施。     

In situ densification of SHS composites from nanoreactants

The primary objective of this investigation was focused on in-situ densification of SHS composites synthesized from nanoreactants. Simultaneous combustion synthesis and densification technique was utilized and it was found to be an effective method to form dense intermetallic-ceramic composites. In this research study, two nanoreactant energetic systems, Al-TiO₂ and Ni-Al-Al₂O₃, were explored. In-situ combustion synthesis and densification experiments were conducted in a uniaxial press with densification pressures up to 200 MPa and preheating capability of 1500K. The experiments were conducted in both vacuum and Ar atmosphere. Samples of titanium aluminides-alumina composites with density in the range of 95–98% have been obtained at a preheating temperature of 860°C and pressure of 100 MPa. Reactants and SHS-produced materials were characterized by SEM, XRD, BET, and DSC/TGA. In addition, more fundamental studies of the reaction kinetics as a function of average particle size of aluminum nanopowders were conducted using DSC.      

Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

TESTS FOR FRACTIONAL INTEGRATION:A MONTE CARLO INVESTIGATION

Abstract. The performance of the Geweke-Porter-Hudak (GPH) test, the modified rescaled range (MRR) test and two Lagrange multiplier (LM) type tests for fractional integration in small samples is examined using Monte Carlo methods. Both the GPH and MRR tests are found to be robust to moderate autoregressive moving-average components, autoregressive conditional heteroskedasticity effects and shifts in the variance. However, these two tests are sensitive to large autoregressive moving-average components and shifts in the mean. It is also found that the LM tests are sensitive to deviations from the null hypothesis. As an illustration, the GPH test is applied to two economic data series.