水煤浆加压气化有关堵塞问题的探讨

通过对水煤浆加压气化装置中堵塞问题的原因分析 ,提出了具体的技术改造措施 ,并从操作方法上加以改进和调整     

Reducing N losses (NH3, N2o, N2) and immobilization from slurry through optimized application techniques

In model, pot and field trials the effect of C reduced slurries and different application techniques on N losses and N immobilization were investigated. The C reduced slurries were produced by mechanical separation. Ammonia losses from surface-applied and injected cattle slurry were measured under field conditions using a wind tunnel system. Injection of slurry was the most efficient way to reduce volatilization of ammonia. After 6 days the total loss from the injected slurry was only 9% of that from surface band application. Furthermore, additional losses of N may occur through denitrification, specially after injection of slurry which may create an anaerobic environment abundant in readily oxidizable C. Therefore denitrification measurements by the acetylene inhibition technique were conducted. Until 100 days after application the loss from the injected slurry was 7.3 kg compared to 4.5 kg N ha^–1 from surface band applied slurry. After injection, denitrification was only 4.1 kg N ha^–1 for C reduced compared to 6.5 kg N ha^–1 for normal slurry. In pot trials the ammonium-¹⁵N of normal slurry and C-reduced slurry was utilized by oats between 52 and 60%, the ammonium sulfate by 67%. The increased biomass C confirmed a greater immobilization of the NH₄-N of the normal slurry resulting in a lower initial efficiency.Dedicated to Prof. Dr. A. Amberger on his 75th birthday     

煤间接液化技术及其发展状况

介绍了煤间接液化技术的特点,从其原理、工艺路线、关键技术及发展现状等方面对间接液化技术进行了详细的阐述,指出发展煤间接液化是解决我国油品短缺的根本途径。     

基于微藻培养的沼液处理相关耦合技术进展

基于微藻培养的沼液处理相关耦合技术是近些年沼液资源化处理利用领域的研究热点。本文综述了沼液处理与CO₂固定耦合技术、沼液处理与高值生物质生产耦合技术、沼液处理与生态农业耦合技术等耦合技术的研究发展现状与优缺点，并指出了各耦合技术发展的关键问题，如沼液处理与CO₂固定耦合技术中高CO₂耐受性藻株选育与固碳影响机理研究问题、沼液处理与高值生物质生产耦合技术中低成本、低能耗高值生物质生产技术开发问题、沼液处理与生态农业耦合技术系统性评价体系缺乏问题等。最后，为促进耦合技术突破现有瓶颈，从微藻选育、微藻培养、沼液处理与沼气工程综合经济性4个角度提出相关的建议。     

鄂南地区新型固井水泥浆性能评价

针对鄂南地区固井质量差的问题,研发了一套新型固井泥浆体系,并对该体系性能进行了评价。研究发现该水泥浆体系的流变性、沉降稳定性良好,游离水少;水泥浆稠化线性正常,防气窜效果好;水泥石的早期强度发展较好,后期强度较稳定;水泥石收缩率低,孔隙率低,有利于增强后期强度。     

Characteristics of coal sludge slurry prepared by a wet-grinding process

Coal sludge slurry(CSS) is an alternative fuel and a potential competitive method for sludge reduction.Based on the researches of coal water slurry, we studied CSSs by using a wet-grinding process with different types of regional municipal sludge(sludge) in an orthogonal experiment. The sludge type,sludge mixing proportion, dosage of dispersant, and grinding time were tested in this study. The results show that water content and its occurrence characteristics in the sludge have primary hindering influences on slurry ability. The range of fixed-viscosity concentrations with raw wet sludge is from 50.78%to 44.40%(by weight), while the range is from 53.35% to 51.51%(by weight) with dry sludge. All of the CSSs exhibit shear-thinning behaviors with different variation trends, especially the CSSs with more than 15%(by weight) raw wet sludge in it. Adding the same proportion of raw wet sludge increases the thixotropic properties of CSSs and the highest area of thixotropy loop is 3065 Pa/s, while the highest value of dry sludge is 1798 Pa/s. Hydrophilic group plays an important role in adsorbing water and building three-dimension networks with other particles, which is the main reason for CSS properties.Therefore, the mechanism can be used to find the way for making high quality CSS.     

两性离子型腐殖酸接枝共聚物水煤浆分散剂的合成及性能

以腐殖酸(HA)、烯丙基磺酸钠(SAS)、二甲基二烯丙基氯化铵(DMDAAC)等为原料,以过硫酸钾为引发剂,采用水溶液自由基聚合原理,制备出了一种新型两性离子型腐殖酸接枝共聚物水煤浆分散剂——HA-SAS-DMDAAC(HSC).通过红外光谱、热重分析和差示扫描量热分析等对聚合物的结构及热力学性能进行了表征和分析,并考察了阳离子单体用量、引发剂用量、反应温度等对水煤浆性能的影响.优化的工艺条件为:m(DMDAAC)∶m(SAS)∶m(HA)=0.3∶1.0∶2.0,引发剂用量7.0wt%,反应温度80℃.结果表明,两性离子型腐殖酸接枝共聚物分散剂(HSC)比阴离子型腐殖酸接枝共聚物分散剂(HS)具有更好的降黏效果,并明显增强了浆体的静态稳定性.     

硫铵结晶稠化器的优化设计

为解决硫铵结晶稠化器由于设计不合理造成的管线堵塞、溢流问题,通过对稠化器增加蒸汽吹扫、安装视镜、加大稠化器顶部空间、采用可调溢流挡板等措施,确保了管线的畅通、离心机进料的稳定,减少了硫胺产品中己内酰胺的夹带。     

线性规划模型在氧化铝生产配料工艺中的应用

配料工序是氧化铝生产中的重点和难点之一,其原矿浆和生料浆技术指标的好坏直接关系到拜耳法的溶出效果和烧结熟料的质量和产能,而其中生料浆合格率的控制又是最为复杂的。本文试图将运筹学的高级工具线性规划模型应用于生料浆的调配中,为提高生料浆合格率探索一条可行的途径。     

氯化物介质矿浆电解法浸出硫化铜精矿

研究了在ＦｅＣｌ３ＨＣｌＮａＣｌ体系中直接电解浸出硫化铜精矿矿浆制取铜粉的工艺条件及机理。试验表明，在阳极初始溶液含Ｆｅ３＋６０ｇ／Ｌ、ＨＣｌ３０ｇ／Ｌ、ＮａＣｌ１５０ｇ／Ｌ，阴阳极电流密度分别为３５０和６００Ａ／ｍ２，１００℃的条件下浸出５ｈ，可获得铜浸出率９８．８％、渣含铜０．３４％、铜粉纯度９７．５％的结果；Ｆｅ３＋浓度是影响铜浸出率最显著的因素，阳极上发生的主要反应是Ｆｅ２＋的氧化；元素硫产生的机理是酸直接分解黄铜矿生成Ｈ２Ｓ，Ｈ２Ｓ溶解后再被Ｆｅ３＋氧化。