化学镀SiCp／Ni－P复合镀层与基体结合强度及其影响因素

论述了ＳｉＣｐ／Ｎｉ－Ｐ复合镀层与钢基体的结合强度及其影响因素。复合镀层中离界面５μｍ厚度以内区域的组成及应力状态对镀层／基体的界面结合有决定性作用，在该区域以外ＳｉＣ粒径变化不影响镀层的结合强度。适当的热处理可提高界面结合力。     

世界高新材料技术发展的新趋势

本文根据90年代以来新材料技术的新进展,高度概括地评述了世界新材料技术发展的新趋势,以期对跟踪世界高新技术提供依据。     

一种碳－碳复合材料长寿命防氧化涂层的失效机制

用液相法联合ＣＶＤ法和硅化法制备了一种碳－碳复合材料复合梯度涂层，在此基础上对这种涂层在氧化过程中的失效机制进行了研究．结果表明：氧化层与液相层界面反应生成的气相产物是涂层失效的根本原因界面上气泡的不均匀形核、长大和破裂导致涂层表面出现孔洞．孔洞处气泡优先形核、长大和破裂并发展成为缺陷而使涂层失效     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。     

Advances in Microporous and Mesoporous Solids—Highlights of Recent Progress

This report highlights developments in the fields of microporous and mesoporous materials that were published mostly during the year 2002. Selected examples are provided to illustrate new zeolite structures, porous coordination materials, mesoporous solids with new compositions, controlled morphologies, and increased hydrothermal and thermal stabilities, as well as porous solids with tunable pore openings or other structural features that can be dynamically modified. A number of applications are discussed, including stabilization of reactive guests, separations, electronic materials, and sensors.     

石英晶体监控法镀制高精度光学薄膜

讨论了石英晶体监控法在光学薄膜镀制过程中的应用原理。通过与常规的光学监控法镀制的膜层相比较．证实了石英晶体监控法有助于提高光学薄膜的光学品质。试验表明所镀膜层的光学性能优异，在光通信和激光器等领域具有广阔的应用前景。     

镁合金表面喷铝防腐蚀层的微观组织分析

在AZ91D镁合金表面热喷铝，用以提高其表面的耐腐蚀性能。采用SEM，EPMA等方法对AZ91D表面喷铝扩散层的组织进行了仔细的观察与分析，发现在防腐蚀层上有大量的Mg17Al12相存在，且呈决状及非连续片状分布。经显微硬度测定，喷铝层硬度较镁合金基体高；腐蚀后这种相凸出于基体，比镁合金基体有较好的耐腐蚀性能。     

材质对蜂窝纸板缓冲性能的影响

对两种不同材质的蜂窝纸板静态应力应变性能和动态缓冲结果进行了比较分析。讨论了蜂窝纸板力学性能对应变速度的敏感性及两种纸板的缓冲性能差异。缓冲试验结果表明。在不同的冲击应变率下蜂窝纸板的材质影响蜂窝纸板缓冲性能。     

The use of natural essential oils as antimicrobial solutions in paper packaging. Part II

We have assessed the antimicrobial, vapor-phase activity of the following natural essential oils (EOs) when used in paraffin-based “active coatings” for paper packaging materials intended to come into contact with foods: clove (Sygzium aromaticum), cinnamon (Cinnamomum zeylanicum), and oregano (Origanum vulgare) EOs, and cinnamaldehyde-enriched cinnamon EO. To our knowledge, this is the first time that such an approach has been presented for consideration by the scientific community.     

Oxidation behavior of silicide coating on Ti3SiC2-based ceramic

A silicide coating was prepared on Ti₃SiC₂-based ceramic by pack cementation to improve the oxidation resistance of Ti₃SiC₂, which is a technologically important material for high temperature applications. The microstructure, phase composition and oxidation resistance of the coated sample were investigated. The results demonstrated that the silicide coating was mainly composed of TiSi₂ and SiC. A single layer of a mixture of SiO₂ and TiO₂ was formed on the surface of the coated sample during isothermal oxidation at 1100 °C and 1200 °C for 20h. Compared to Ti₃SiC₂, the parabolic rate constant of silicide coated Ti₃SiC₂ decreased by 2~3 orders of magnitude. Furthermore, the coated sample showed much better cyclic oxidation resistance than Ti₃SiC₂ during the cyclic oxidation at 1100 °C for 400 times. However, during the preparation of the coating, a number of fine cracks formed in the outer layer of the coating. When these cracks penetrated the whole coating during the cyclic oxidation, the oxidation rate was accelerated, which degraded the oxidation resistance. Electronic Publication