Characterization of supported Pd-Pt catalysts by chemical probes

The temperature programmed (palladium) hydride decomposition appeared very effective method for diagnosing the extent of alloying in Pd-Pt/SiO₂ catalysts. Introduction of Pt to Pd catalysts moves the TPHD peak gradually towards lower temperatures and the shift in hydride decomposition peak is accompanied by a decrease in the amount of released hydrogen. The catalysts prepared the direct redox method showed much better alloy homogeneity than the samples prepared by coimpregnation. The results of probing with other techniques, i.e. catalytic probing with hydrodechlorination of CCl₂F₂ and XRD, were in line with TPHD data. The catalytic probing showed the presence of synergistic effect, a clear indication of Pd-Pt mixing. XRD data of post-reaction samples showed carbon incorporation into Pd-rich phase, whereas separate Pt-rich phase did not experience any bulk carbiding.     

Plasticity of feature-based selection in triple-conjunction search.

Two experiments examined the disruption of feature-based selection in triple-conjunction search at multiple target transfers. In Experiment 1, after 10 training sessions, a new target possessing previous distractor features was introduced. This produced disruption in RT and fixation number, but no disruption in feature-based selection. Specifically, there was a tendency to fixate objects sharing the target's contrast polarity and shape and this did not change even upon transfer to the new target. In Experiment 2, 30 training sessions were provided with three target transfers. At the first transfer, the results replicated Experiment 1. Subsequent transfers did not produce disruption on any measure. These findings are discussed in terms of strength theory, Guided Search, rule-based approaches to perceptual learning, and the area activation model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of water and ammonia on hydrotreating catalysts and activity for tetralin hydrogenation

The effects of H₂O and NH₃ on the kinetics of the liquid phase hydrogenation of tetralin to decalin at 6.9 MPa and 330°C over commercial P---Ni---Mo/alumina catalysts in the presence of H₂S have been investigated. H₂O functioned as a mild kinetic inhibitor to an extent sensitive to the H₂S level. Quasi in situ XPS was used to investigate the catalyst structure after exposure to H₂0/H₂S.     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

OPTIMUM-AIV: A planning and scheduling system for spacecraft AIV

This paper presents a project undertaken for the European Space Agency (ESA). The project is developing a knowledge based system for planning and scheduling of activities for spacecraft assembly, integration and verification (AIV). The system extends to the monitoring of plan execution and the plan repair phases.

The objectives of the contract are to develop an operational kernel of a planning, scheduling and plan repair tool, called OPTIMUM-AIV, and to provide facilities which will allow individual projects to customize the kernel to suit its specific needs. The kernel shall consist of a set of software functionalities for assistance in the initial specification of the AIV plan, in the verification and generation of valid plans and schedules for the AIV activities, and in interactive monitoring and execution problem recovery for the detailed AIV plans. Embedded in OPTIMUM-AIV are external interfaces which allow integration with alternative scheduling systems and project databases.

The current status of the OPTIMUM-AIV project, as of May 1991, is that the architectural design of the system has been agreed on by ESTEC/ESA and detailed design and implementation is now underway, expecting a final delivery in October of 1991.     

IR spectroscopic study of Pt/Kl zeolites using adsorption of CO as a molecular probe

FTIR spectra of CO adsorbed on Pt/KL catalysts show that the relative band intensities and the total dispersion markedly depend on the catalyst preparation method (ion exchange, incipient wetness impregnation or co-impregnation with KCl). The CO stretching frequency of the dominant band for linear CO is shifted to higher wavenumbers, parallel with the proton concentration in the reduced catalyst, which is derived independently from the intensity of the IR bands of the OH groups. The results are in accordance with the model that electron-deficient platinum particles are platinum-proton adducts.On leave from: N.D. Zelinsky Institute of Organic Chemistry, Academy of Sciences, Moscow, USSR.     

Self-calibration based on invariant view recognition: Dynamic approach to navigation

We extend a dynamic approach of behavior generation to the representation of spatial information. Two levels of dynamics integrate dead-reckoning, dominant far from home bases, and piloting, dominant near home bases. When the view-based piloting system recognizes a home base, visual place information recalibrates the dead-reckoning system, inverting the hierarchical ordering of the two dynamic levels by time scale inversion. Reference views taken at discrete home bases are recognized invariantly under rotation of views. This process yields compass information. Continuous translational information is obtained as a neural place representation built from view correlations with a scattered set of local views. This self-calibrating cognitive map couples into a dynamics of heading direction integrating the behaviors of obstacle avoidance and target acquisition. Targets can be designated in terms of the cognitive map. We demonstrate the dynamical model in simulation.     

Boundary Constrained Swept Surfaces for Modelling and Animation

Due to their simplicity and intuitiveness, swept surfaces are widely used in many surface modelling applications. In this paper, we present a versatile swept surface technique called the boundary constrained swept surfaces. The most distinct feature is its ability to satisfy boundary constraints, including the shape and tangent conditions at the boundaries of a swept surface. This permits significantly varying surfaces to be both modelled and smoothly assembled, leading to the construction of complex objects. The representation, similar to an ordinary swept surface, is analytical in nature and thus it is light in storage cost and numerically very stable to compute. We also introduce a number of useful shape manipulation tools, such as sculpting forces, to deform a surface both locally and globally. In addition to being a complementary method to the mainstream surface modelling and deformation techniques, we have found it very effective in automatically rebuilding existing complex models. Model reconstruction is arguably one of the most laborious and expensive tasks in modelling complex animated characters. We demonstrate how our technique can be used to automate this process.     

立足于实际的数字系统级诊断

本文主要提出了一个立足于当前实际的系统级诊断模型。在这模型下，系统级诊断变得很容易。模型基于下列假定：将系统划分成既具有自测试又具有测试其它单位能力的一种单位；其测试能力和测试结果用模糊数学来描述；自测试时在各种情况下均能给出正确的结果；测试其它单位时，除测试者本身具有严重故障外，也均能给出正确结果。     

Developing real-time knowledge-based systems with PERFECT

PERFECT (Programming EnviRonment For Expert systems Constrained in reasoning Time) is aimed at providing the necessary engineering support in real-time knowledge-based system development. PERFECT bridges the gap between the traditional analysis and design methodologies, and the implementation tools for these systems. It does so by providing the means to construct a knowledge model and to choose a suitable inference strategy. Subsequently the properties of the knowledge model and inference strategy may be analysed. For instance, it may be checked whether the knowledge model contains sufficient knowledge to diagnose a fault in an industrial process. Moreover, it may be checked whether the inference engine is able to provide an answer to a certain problem in time. If not, the analyser of PERFECT proposes an alternative structure of the knowledge model. When the constructed knowledge model and the chosen inference strategy show the required time efficiency, the compiler of PERFECT may translate them to an actual real-time knowledge based system in COGSYS. In addition, guidelines are provided with respect to the design of the human-machine interface. The resulting system is an instrument—a source of information that can be used by the human operator during problem-solving, rather than a prosthesis—a device that solves the entire problem by itself and presents the outcome to the human operator.