Microstructural investigation of long-term degradation mechanisms in GFRP dowel bars for jointed concrete pavement

Steel dowel bar is used to transfer loads in concrete pavement slab. However, once the steel dowel bar corrodes, it may cause faults, such as joint freezing in concrete pavement, level differences resulting from spalling or decreased efficiency of load transfer, etc., which are the same problems experienced by typical reinforcing steel. This study evaluated the applicability of glass fiber-reinforced polymer (GFRP) dowel bar as a substitute for steel dowel bar. A microstructural analysis was conducted to examine the decrease in durability of GFRP dowel bar exposed to deterioration environments. To analyze the deterioration mechanism of GFRP dowel bar, scanning electron microscopy was employed and the porosity was measured by the gas absorption method. It was concluded that the longer the GFRP dowel bar was exposed to deterioration environments, the more the interlaminar shear stress decreased. This result was validated by the microstructural analysis. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Functional copolymer of geraniol and acrylonitrile: Synthesis and characterization

The radical copolymerization of acyclic terpene namely geraniol [GER] with acrylonitrile [AN] in DMF at (70 ± 0.1)°C for 1 h, using benzoylperoxide (BPO) as an initiator has been carried out under inert atmosphere of nitrogen. The kinetic expression for reaction is R_p ∝ [BPO]^0.5 [AN]^1.0 [GER]^1.0. The IR spectrum of the copolymer shows bands at 3432 and at 2244 cm^?1 due to ? OH group of GER and ? CN group of AN, respectively. The ¹³C‐NMR spectrum shows peaks at 73–75 δ ppm and 116–120 δ ppm due to ? OH group of GER and ? CN group of AN, respectively. The thermogravimetric analysis and differential scanning calorimetry study shows that copolymer is thermally stable up to 407°C and has glass transition temperatures (T_g) 56°C. The reactivity ratios r₁ (AN) and r₂ (GER) have been calculated as 0.05 and 0.005, respectively. The Alfrey‐Price Q‐e parameter for GER has been calculated as 0.094 and ?2.0, respectively. The molecular weights of the copolymers have been evaluated by gel‐permeation chromatography. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

开放式玻璃自动切割机计算机控制系统

文章介绍一种自行研制的玻璃自动切割机开放式计算机控制系统，并针对该切割机加工范围大、惯性大、动态精度要求高等特点，研究了一种智能适应型PID控制算法。现场测试表明，该系统在功能、性能和控制精度上达到或接近国外同类产品的先进水平，在系统硬件和软件的开放性上优于国外产品。文中详细介绍了该计算机控制系统的功能、系统设计、控制算法及其调试结果。     

Bruchanalyse an Hohlgläsern

Failure analysis of hollow glasses The failure analysis is very important to clarify damages of hollow glasses. Damages of glass bottle through over pressure are very often linked with damages to persons. This is the reason why the causal research is from particular importance. Different surface characteristics of glass fragments as well as the fracture pattern give hints to the direction of the crack, the stress just before breakage and the reason of stress. A reconstruction of the bottle is a further helpful instrument for cause studies. The difference of the various characteristics of the surface will be explained. Further on there will be discussed different reasons and mechanism of fracture.     

PbO－Bi_2O_3－B_2O_3－SiO_2系重金属氧化物玻璃的结构与光学性

通过密度、可见光光谱、红外吸收光谱、Ｃｏ－６０辐照损伤试验及荧光光谱的测试，研究了ＰｂＯ－Ｂｉ２Ｏ３－Ｂ２Ｏ３－ＳｉＯ２玻璃系的光学性能与结构．密度最高可达８．４６４ｇ／ｃｍ３其紫外吸收达截止波长随Ｐｂ２＋及Ｂｉ３＋含量升高而红移．玻璃熔化温度低达８５０℃．在ＰｂＯ－Ｂｉ２Ｏ３－Ｂ２Ｏ３系玻璃中加人ＳｉＯ２可使玻璃结构更致密．室温下该系统玻璃在３６０ｎｍ有一个宽的激发峰，能产生４１８ｕｍ及４３８ｕｍ两个弱的发射峰．该系统玻璃的结构是由［ＳｉＯ４］４－、［ＢＯ３］３－、［ＢＯ４］５－、［ＰｂＯ４］６－及［ＢｉＯ６］９－构成．其中部分Ｐｂ２＋及Ｂｉ３＋以网络外体进入玻璃．     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces. III. Investigation of Possible Physico-Chemical Interactions at the Interphase

Surface free energies of polyurethanes made from toluene diisocyanate and 1, 4 butanediol-based hard segments and caprolactone polyol-based soft segments were calculated using additive functions. Good agreement was found between the calculated values based on additive functions and the calculated values based on contact angle measurements. The phase-separated polyurethanes were found to have a higher polar surface free energy component (γ^P). This was linked to the preferential segregation of butanediol/butanediol-derived moieties to the polyurethane surfaces due to phase separation. The adhesion values of these polyurethanes to soda-lime glass were correlated with their respective γ^P values and a linear relationship was found. It was also shown that the adhesion values of the low γ^P polyurethanes improved substantially when the glass surfaces were coated with a thin layer of butanediol prior to the bonding. The modulus of the interphase region rich in butanediol was evaluated. Although a modulus increase was found at the interface, this increase was found to play a secondary role in the adhesion. The chemical interactions at the polyurethane/glass interphase were investigated by pre-treating the glass surfaces with methyl-trimethoxysilane and trimethylchlorosilane prior to adhesion testing. The adhesion data showed no significant difference between the uncoated and the silane-treated glass substrates. Based on this experimental evidence, the possibility of any covalent or ionic bonding at the polyurethane/glass interphase was assumed negligible. It was determined that the mechanism of adhesion between the polyurethanes and the glass surface could be through the formation of an interphase region in which hydrogen bonding between the butanediol-rich interphase region and the hydroxylated glass surface plays a key role.     

掺Tb_2O_3法拉第旋转玻璃

本文研究了掺Tb_2O_3的法拉第旋转玻璃的组成、物理化学性质及制备技术,实验结果表明维尔德常数V随着Tb_2O_3浓度的增大而增大,硼硅酸盐玻璃中Tb_2O_3含量大于20％(mol)时,维尔德常数可以达到-0.0030min/A/m·cm,从熔制试验结果0.5L铂坩埚可以获得质量较好的φ50×25mm的样品。     

气垫性能及平板玻璃缓冲包装

对我国发明的缓冲包装气垫进行静态试验,测其载荷-变形曲线,表明它属于正切型;对气垫作为内衬的PZOV型平板玻璃包装件进行冲击和振动试验,证明具有优良的防震缓冲性能,适于平板玻璃的运输包装。