荫罩黑化及DX气与煤气成分的探讨

本文介绍了彩色显像管荫罩黑化反应的机理,详细说明了DX气制气流程,以及DX气的成分对黑化膜品质的影响。计算分析了成分不同的煤气在制成DX气时的成分变化。同时还分析了黑化工艺和黑化设备对煤气成分波动的适应性,及在生产实践中改变DX气制气时的煤气空气对黑化膜质量的影响。     

Stationary and traveling hot spots in the catalytic combustion of hydrogen in monoliths

In the course of catalytic combustion of hydrogen (1-5% H₂ in air) in monolith reactors, strongly localized stationary and traveling hot spots arise in response to a sudden and persistent rise of gas flow velocity. Such hot spots may occur, e.g. in a catalytic converter following the acceleration of a car or in a catalytic combustor as a result of a load increase. This phenomenon is illustrated by simulations using a two-phase reactor model. The temperature overshoot of the adiabatic limit is typically of the order of the adiabatic temperature rise itself.The following mechanism underlies this behavior. Light fuel is supplied to the catalytic wall by fast diffusion (in the direction perpendicular to flow), while the heat released by reaction is removed from the wall by the slower, mixture-averaged heat conduction. This leads to accumulation of heat at the catalytic surface that eventually saturates at high temperatures. The hot spots may exhibit intricate dynamics, propagating downstream or upstream, or they may remain stationary. The direction of propagation depends on the relative strength of convective downstream and conductive upstream contributions to the overall displacement of reaction fronts. Generally, the hot spot tends to drift downstream at low flow velocities, remain stationary at intermediate flow velocities, and drift upstream at high flow velocities.     

NUMERICAL SIMULATION OF STREAMBED HEAT TRANSFER

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｉｍｕｌａｔｉｏｎｏｆｓｔｒｅａｍｗａｔｅｒｔｅｍｐｅｒａｔｕｒｅｉｓｓｉｇｎｉｆｉｃａｎｔｌｙｉｍｐｏｒｔａｎｔｆｏｒｔｈｅｓｔｕｄｙｏｆｎｕｍｅｒｉｃａｌｍｏｄｅｌｉｎｇｏｆｒｉｖｅｒｉｃｅｐｒｏｃｅｓｓｅｓ［１］　．Ｈｉｓｔｏｒｉｃａｌｌｙ，ｔｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｉｎｇｏｆｔｈｅｔｒａｎｓｐｏｒｔａｎｄｆａｔｅｏｆｈｅａｔｉｎａｗａｔｅｒｂｏｄｙｈａｓｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｅｘｔｅｎｓｉｖｅｓｔｕｄｙｆｏｒｖａｒｉｏｕｓｒｅ…     

Optical measurements of thermal diffusivity of a material

The measurement of thermal diffusivity of a material (in particular, a thin film) is important for various reasons, e.g., to predict the heat transfer in the solid subjected to a thermal process, to monitor surface composition or morphology, or to detect invisible subsurface defects like delaminations. This measurement can be done in a noncontact manner using various photothermal methods. Such methods typically involve pulsed heating of the surface by small amounts using a laser source; the decay of the surface temperature after this pulsed photothermal heating is then probed to provide the thermal diffusivity. Various probing methods have been developed in the literature, including the probing of reflection, refraction, and diffraction from the pulsed heated area, infrared thermal radiometry, and surface deformation. This paper provides an overview of such techniques and some examples of their applications.     

提高K-9曲拐质量的热处理工艺

K-9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。因此应用正交试验，合理地选择了热处理工艺参数，提高了出炉温度，增加了珠光体数量，解决了K-9曲拐的质量问题。     

淀粉液化液灭酶方法的研究

某些情况下淀粉液化液需要严格控制液化的程度 ,因此需要及时终止残余淀粉酶的活性。实验用降低液化液 pH值、升高温度、以及两者并用等 3种方法结束液化反应过程 ,实验结果可作为工业生产过程参考。     

Al2O3基耐磨陶瓷涂层的燃烧合成与应用

介绍了燃烧合成表面涂层技术的基本原理 ,开发了相应的制备工艺 ,并在此基础上研制了内覆陶瓷涂层的复合钢管、弯管及弯头。陶瓷涂层主要由α Al2 O3相、部分FeO·Al2 O3相和 3Al2 O3·2SiO2 相组成 ,采用添加剂可以有效提高熔体的流动性 ,使陶瓷的凝固和结晶过程得到进一步控制 ,有助于减少孔隙 ,提高陶瓷涂层的致密度。现场应用试验表明 ,涂层具有较好的耐磨性能 ,可使设备的使用寿命大为延长     

Optimization of metal-based multilayers for transparent heat mirrors

Multilayer calculations by conventional matrix methods for dielectricum/noble metal/dielectricum systems on glass have been performed. The aim has been to maximize the integrated parameters for solar transmission, T_sol, and transmission of visible light, T_eye We have found that Ag is superior for maximizing the transmittance over the narrow visible wavelength range owing to the low internal absorptance. When solar energy transmission is considered multilayers based on Au are the best choice for metal film thicknesses above 15 nm. For thinner films, Ag is still to be preferred.     

40Cr钢复合热处理强韧化

用光学及电子显微镜(SEM.TEM)观察不同热处理的40Cr 钢的冲击及断裂韧性断口、及金相组织,阐明其间相互关系;断口结构可反映断裂特征,组织情况;细化晶粒提高强度、塑性和冲击韧性,但却减少脆断的特性距离 l 因而降低 K_(1c)模;减少碳(杂质)偏聚而使其呈较均匀地分布,从而减少可诱发塑坑的较粗大的碳(杂质)化合物的析出,即增加塑坑的间距 di 以及增加塑断组成物。从而都可增加断裂临界应变 ef,都可以提高 K_(1c)40Cr 复合热处理既靠先超高温淬、回火以减少碳(杂质)偏聚,改善其分布,以反增加位错马氏体从而提高 K_(1c),也靠后淬、回火细化晶粒而提高强度、塑性和冲击韧性,各自发挥长处达到强韧化。     

重油纳米化助燃效果研究与表征

将复配的分散剂加入重油中制备得到重油纳米颗粒，采用氧弹热值对比法对所研制的纳米化重油进行实验室评价。研究结果表明，纳米化后的重油燃烧性能得到了改善，在掺水量为3％～12％时，重油的燃烧效率提高了2．5％～6．1％。通过TEM观察，纳米化后的重油呈水包油（O／W）型乳液结构，油水界面清晰，界面膜较厚，乳化油粒径约为20～50nm，油水分散均匀，并且分散后的重油粘度增幅小，掺水量在15％以内，粘度增幅不超过20％，并且随着掺水量的增加，乳化重油的粘度逐渐减少。另外，乳化重油稳定性好，室温下至少可保存6个月，在80℃下存放3天未发生破乳现象。