Evaluating dynamic performance: The influence of salient Gestalt characteristics on performance ratings.

It is well recognized that performance changes over time. However, the effect of these changes on overall assessments of performance is largely unknown. In a laboratory experiment, we examined the influence of salient Gestalt characteristics of a dynamic performance profile on supervisory ratings. We manipulated performance trend (flat, linear-improving, linear-deteriorating, U-shaped, and ∩-shaped), performance variation (small, large), and performance mean (negative, zero, positive) within subjects and display format (graphic, tabular) between subjects. Participants received and evaluated information about the weekly performance of different employees over a simulated 26-week period. Results showed strong main effects on performance ratings of both performance mean and performance trend, as well as interactions with display format. Theoretical and practical implications of the results are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Context-gated knowledge partitioning in categorization.

According to the knowledge partitioning framework, people sometimes master complex tasks by creating multiple independent parcels of partial knowledge. Research has shown that knowledge parcels may contain mutually contradictory information, and that each parcel may be used without regard to knowledge that is demonstrably present in other parcels. This article reports 4 experiments that investigated knowledge partitioning in categorization. When component boundaries of a complex categorization were identified by a context cue, a significant proportion of participants learned partial and independent categorization strategies that were chosen on the basis of context. For those participants, a strategy used in one context was unaffected by knowledge demonstrably present in other contexts, suggesting that knowledge partitioning in categorization can be complete. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance of unitary heat pumps: review of ASHRAE Symposium session

1. 1. System design optimization and validation for single-speed heat pump by S.K. Fischer and C.K. Rice, Oak Ridge National Laboratories.

2. 2. Analysis of on/off cycling for an air-to-air heat pump operating in the heating mode by W.A. Miller, Oak Ridge National Laboratories.

3. 3. Field measured cycling, frosting and defrosting losses for a high efficiency air source heat pump by V.D. Baxter and J.C. Moyers, Oak Ridge National Laboratories.

4. 4. Design and available energy analysis of a heating-only residential heat pump for the Western Pacific Northwest by D.E. Elger, C.M. Reistad and S. Lang, Oregon State University.

5. 5. A study of heat pump service life by Nance C. Lovvorn, Alabama Power Company and Carl C. Hiller, Electric Power Research.

Estimating and eliminating redundant data transfers over the web: a fragment based approach

Redundant data transfers over the Web, can be mainly attributed to the repeated transfers of unchanged data. Web caches and Web proxies are some of the solutions that have been proposed, to deal with the issue of redundant data transfers. In this paper we focus on the efficient estimation and reduction of redundant data transfers over the Web. We first prove that a vast amount of redundant data is transferred in Web pages that are considered to carry fresh data. We show this by following an approach based on Web page fragmentation and manipulation. Web pages are broken down to fragments, based on specific criteria. We then deal with these fragments as independent constructors of the Web page and study their change patterns independently and in the context of the whole Web page. After the fragmentation process, we propose solutions for dealing with redundant data transfers. This paper has been based on our previous work on ‘Web Components’ but also on related work by other researchers. It utilises a proxy based, client/server architecture, and imposes changes to the algorithms executed on the Proxy server and on clients. We show that our proposed solution can considerably reduce the amount of redundant data transferred on the Web. Copyright © 2004 John Wiley & Sons, Ltd.     

The accuracy of self-monitoring and its relationship to self-focused attention in dysphoria and clinical depression.

The accuracy with which dysphoric (Study 1) and clinically depressed (Study 2) individuals make self-regulatory judgments about their own performance in the absence of external feedback and the extent to which this relates to trait self-focused attention (SFA) were examined. Relative to objective criteria, both dysphoric and depressed participants showed a positive judgment bias, overestimating the number of trials they had performed correctly. Relative to control participants, the dysphoric and depressed groups showed a reduction in the extent of this positive bias in that they judged error trials more accurately and correct trials less accurately. Although the dysphoric and depressed groups both reported elevated trait SFA, this did not correlate significantly with accuracy of self-judgment on the performance-monitoring task. Implications for self-regulation models of depression are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Emission of trace toxic metals during pulverized fuel combustion of Czech coals

A study of the trace elements emission (As, Se, Cd, Co, Cr, Cu, Zn, Hg, Tl, Pb, Ni, Sn, Sb, V, Mn and Fe) from pulverized coal combustion has been made at six heating and power stations situated in the Czech Republic. The amount of chlorine in coal has considerable influence on volatilization of some elements such as Zn, Cu, Pb, Hg and Tl, which is explained by the formation of thermodynamically stable compounds of these elements with chlorine. Generally, the affinities for Cl follows the order Tl > Cu > Zn > Pb > Co > Mn > Sn > Hg. The experimental data indicates enrichment of some of the trace toxic elements in the emissions (Cu, Zn, As, Se, Cd, Sn, Sb, Hg and Pb) and good agreement was obtained by thermodynamic equilibrium calculations with a few exceptions. In the case of Fe, Mn, Co, Cr and Sn calculated values are overestimated in the bottom ash and there are zero predicted amounts of these elements in the fly ash. In comparison, the results from experiments show up to 80% of these elements retained in fly ash. This implies that there exist additional steps leading to the enrichment by Fe, Mn, Co, Cr and Sn of small particles. Such mechanisms could include the ejection during devolatilization of small inorganic particles from the coal of bottom ash particles, or disintegration of the char containing these metals to small particles of fly ash. On the other hand, there are slightly overestimated or similar values of relative enrichment factors for As, V, Cu, Cd, Sb, Tl and Pb in the fly ashes and zero predicted values for bottom ashes. Our experimental results show about 5% or less of these elements are retained in bottom ashes, so they probably remain in the bottom ash inside unburned parts of coal. Copyright © 2003 John Wiley & Sons, Ltd.     

Extension of a combined analytical/numerical initial value problem solver for turbulent mixing with combustion

Here, we describe the development of a reacting flow multi-species/combustion methodology, implemented as an extension to the differential reduced ejector analysis (DREA) computer program [Mathematical and computer modeling, vol. 31, 2000, p. 21; Appl. Math. Model. 25 (2001) 427; Comput. Math. Appl. 43(10–11); NASA Contractor Report, 1998]. Use of the single fluid IVP solver framework that was developed for the original DREA model has been directly coupled into the combustion formulation. With these modifications, the analysis has an elementary single step reaction Fuel+Oxidizer→Product combustion capability. Though approximate in nature, the simplicity and efficiency of the DREA formulation make it suitable for its original niche, namely design and preliminary design environments where more complex and expensive models may be inappropriate.     

工业炉燃烧系统应用技术探讨

燃烧及其控制技术是各种火焰炉技术核心，强调高水平燃烧系统应对燃烧全过程进行控制，着重对燃烧系统点火、火焰监测、空燃比比例调节、燃烧过程各参数监控、炉温自动控制等各个方面内容进行了讨论介绍，最后用某天然气加热炉燃烧系统原理图及应用效果进行实例说明。     

Deactivation of V2O5-WO3-TiO2 SCR catalyst at a biomass-fired combined heat and power plant

The deactivation of a commercial type V₂O₅-WO₃-TiO₂ monolith catalyst under biomass combustion was studied at a full-scale grate-fired power plant burning straw/wood using a slip stream pilot scale reactor. The aerosols in the flue gas consisted of a mixture of potassium chloride and sulphate. Three catalyst elements were exposed at 350 °C, and one element was exposed at 250 °C for comparison. The catalyst activity was measured in the reactor at the exposure temperature by addition of NH₃ and extra NO. The activity, in terms of a first-order rate constant, dropped by 52% after about 1140 h indicating a very fast deactivation compared to coal firing. It was also found that the reactor temperature was not of importance for the deactivation rate. SEM-EDX analysis showed that particle deposition and pore blocking contributed to the deactivation by decreasing the diffusion rate of NO and NH₃ into the catalyst. However, potassium also penetrated into the catalyst wall and the resulting average K/V ratio in the catalyst structure was high enough (about 0.3–0.5) for a significant chemical deactivation. Chemisorption studies carried out in situ showed that the amount of chemisorbed NH₃ on the catalyst decreased as a function of exposure time, which reveals that Brøndsted acid sites had reacted with potassium compounds and thereby rendered inactive. When washed by 0.5 M H₂SO₄ the regenerated catalyst regains a higher activity than that of the fresh catalyst at temperatures higher than 300 °C, but even though reactivation is possible, the deactivation rate appears too high for practical use of the SCR process in straw combustion.     

两缸天然气发动机工作均匀性分析

对一台火花点火式两缸天然气发动机进行了缸内示功图、进气压力波、空燃比、缸盖及活塞温度场和排放等项目的测试。试验和分析表明，两缸进气道中存在着明显的压力波动，波动程度取决于发动机工况。两缸混合气的质和量都不均匀，一缸空燃比偏浓，燃烧不完全，后燃倾向大；二缸空燃比较合适，燃烧过程较完善。两缸的尾气排放量相差不大。据此，可应用稀燃、快燃技术，以提高燃烧速度，改善燃烧过程；同时调整进气系统特性，将两缸混合气的质和量的不均匀性降到最低限度。