基于CFD-DEM方法的净化器流场模拟与结构优化

针对空气净化器能耗高的问题,使用离散元方法(DEM)在吸附滤网中建立随机堆积柱形活性炭模型,采用计算流体力学(CFD)方法对空气净化器内部流场进行数值模拟,在模拟与实验验证的基础上,考察了压降最小、流场最均匀的吸附滤网结构。结果表明,空气净化器压降主要发生在轴向,活性炭吸附滤网中回流、沟流现象严重,流体阻力是其他两种滤网的3倍。边数对多边形填充孔结构吸附滤网内压降与流场均匀性无影响,当孔结构改为圆形时,压降减小约52 Pa,节能18.4%(49 W);当孔直径由8 mm增至12 mm,压降减小约48 Pa,节能19.4%(45 W);滤网间距对空气净化器压降无影响,圆形、小孔径的吸附滤网内流场最均匀。     

Experimental estimation of the settling velocity and drag coefficient of the hollow cylindrical particles settling in non-Newtonian fluids in an annular channel

The drag coefficient data of particles settling in an annular channel is very much essential for designing different solid–fluid handling equipment, such as the fluidized bed. Experimental settling velocity, wall factor, and drag coefficient data of the hollow-cylinder particle are presented. Carboxymethyl cellulose solution has been used as the working fluid with a flow index of 0.64 ≤ n ≤ 0.91 and a consistency index of 0.31 ≤ K ≤ 1.81. The experimental results covered a wide diameter ratio range (0.14 ≤ d_eq/L ≤ 0.46), hollow cylinder inner to outer diameter ratio (0.2 ≤ d_i/d_o ≤0.8), and Reynolds number (0.05 ≤ Re ≤ 51 and 0.09 ≤ Re_∞ ≤ 55). d_eq, d_i, and d_o are the equivalent inner and outer diameters of the particle, L is the annular gap, and Re and Re_∞ are the Reynolds numbers in the presence and absence of the wall effect, respectively. The wall factor decreased, and the drag coefficient increased with d_eq/L and d_i/d_o ratios. The above parameters declined with the Reynolds number. The hollow cylinder experienced a lesser wall effect than the spherical particles settling in a non-annular channel. In some cases, the wall factor of the hollow cylinder is found to be equal to the spherical particles settling in an annular channel. The developed correlations have successfully predicted the drag coefficients of the hollow cylinder.     

垂直同心环空管内上升弹状流向团状流的转换

对垂直同心环形管内上升气液弹状流向团状流的转换进行了一定的研究。根据弹状流及团状流的流动特性 ,并考虑同心环形管的结构特征 ,建立了垂直同心环形管上升气液团状流向环状流转换的新的理论模型。通过文中的实验数据及其他研究者的实验数据对该模型的预测性能进行了检验 ,并与其他研究者的模型进行了比较 ,最后还对环形管结构参数对转换的影响进行了一定的分析。     

气升式环流反应器强制振荡周期对传质影响的研究

在同一反应器中比较了不同振荡周期下的气液传质特性,为最优强制振荡周期的确定提供了实验依据和分析基础。选择体积传质系数及气含率作为传质研究的主要评价指标,实验结果表明,动态操作下的传质效果明显优于稳态,而不同振荡周期传质效果也大不一样。在0.8~2.4m3h-1的气速范围内,由静压力、导流管顶部截面流体速度、全床气含率(及传质系数)周期性变化所确定的振荡周期TP、TV、TK比稳态操作下的全床平均传质系数分别提高了3.92%~27.3%,2.35%~24.5%,28.2%~43.3%。由反应器内全床平均气含率或传质系数确定的振荡周期TK是最佳振荡周期。     

超声波气升式内环流反应器传质性能的实验研究

研究了超声波对气升式内循环反应器传质性能的促进作用,重点考察比较了牛顿型流体和非牛顿型流体 有、无超声波时气升式反应器的传质性能及气速、液体粘度、超声功率对总体积传质系数KLa的影响。实验证明， 无论是牛顿型流体还是非牛顿型流体，气速越小，超声功率对总体积传质系数KLa的相对影响越大；随着气速的 增大，这种影响逐渐减小，当气速增大到0.0615m·s-1时，超声波对总体积传质系数KLa的相对影响已较微弱。气 速增加，牛顿型流体和非牛顿型流体的KLa均增加，但牛顿型流体增加的幅度比非牛顿型流体要大。粘度增加，KLa 减小。气速、粘度、超声功率对KLa的影响分别是气速大于粘度大于超声功率。提出了相应的KLa经验关联式，并作了 讨论。     

垂直同心环形管内上升气液两相环状流含气率与压降预测

对垂直同心环形管内上升气液环状流的截面含气率及压降预测进行了研究.根据Kelessidis有关团状流向环状流转换的思路以及Wallis有关圆管内环状流积分分析的方法,考虑环形管的结构特征及环状流的流型特征,通过两相动力学理论建立了新的预测截面含气率及总压降的模型.将新模型及现有模型与实验数据的分析比较表明新模型对于总压降的预测效果较好.     

2-氯-5-氯甲基吡啶在气升环流反应器中的合成研究

A new process for the direct chlorination of 2-chloro-5-methylpyridine to yield 2-chloro-5-chloro-methylpyridine in an airlift loop reactor (ALR) has been studied.Five main reaction conditions including TR,na/ns,cp,Qg and dD/dR were optimized.The average molar yield and purity of 2-chloro-5-chloromethylpyridine obtained were 79% and 98.5% respectively under the optimum operating conditions.Finally,the efficiency for the preparation of 2-chloro-50chloromethylpyridine with ALR and stirred tank reactor(STR) respectively was compared.     

用于微藻培养的气升式光生物反应器

基于微藻光自养培养特性 ,构建了具有较大面积体积比的 15 L内外光源相结合的气升式光生物反应器 ,考察了两种不同形态藻细胞培养体系中 ,光强随细胞浓度及光程距离衰减的规律 ,得到了描述光衰减的数学关系式 ,即在鱼腥藻 712 0培养体系中为 I=I0 exp[- (0 .0 131+0 .987OD750 )·L],在聚球藻 70 0 2培养体系中为 I=I0 exp[- (- 0 .0 2 39+0 .0 777OD750 )·L],并据此对培养过程中光强沿反应器径向的动态分布情况进行了估算。在该反应器中进行了鱼腥藻 712 0和聚球藻 70 0 2两种蓝藻的光自养培养 ,藻细胞培养终密度分别达到 1.5 3g/ L和 3.4g/ L ,体积产率分别为 0 .31g L-1d-1和 0 .5 7g L-1d-1,说明该反应器适合于微藻的高密度培养     

The jet shape of concentric mixers

In this paper, we present an analytical and experimental study of the mixing region and jet shape in concentric mixers. Based on a simple but effective analytical model, we are able to predict the growth of the mixing region with respect to downstream distance. An experimental study is conducted on the concentric mixing of paper fibre stock and water. By comparing with experimental results, we confirm that the shape of the mixing region is a practical indicator of mixing efficiency with the consideration of jet velocity and geometry including the nozzle wall thickness.     

平直和柱面小翼涡发生器诱发流动特性PIV实验研究

在Re=700、攻角α=60°时,利用粒子图像测速技术(PIV)研究了矩形通道内平直和柱面小翼诱发的流动结构,获得涡发生器(VG)后1~3倍弦长距离的速度场和涡量场。结果表明,三角小翼的涡结构主要分布在斜边中心和后缘角区;梯形和矩形小翼的涡结构主要分布在前缘翼梢区域和后缘区域;此外,柱面梯形小翼中心区域的涡结构明显,影响范围最大。随着流动的进行,涡结构强度逐渐减弱,三角小翼仅维持一个主涡向下继续运动;梯形和矩形小翼也仅维持一个主涡和一个后缘角涡的结构。随着斜截角的减小,前缘和中心区域诱发高强度涡结构的能力增强,影响范围也广,而后缘角涡的影响范围较小,且与底部壁面的距离较远。