传统织物的一次性设计

通过对纤维艺术的学习与研究,我对纤维构成织物的设计有了进一步的思考。在传统编织基础上不断发展起来的现代纤维艺术,一方面在艺术领域得到了有目共睹的长足发展,另一方面在市场经济下也不断地回归实用与设计。在纤维构成织物的设计中包括直接完成半成品或成品的一次性设计和在此基础上进行的二次性设计。尤其,对"传统织物的一次性设计"进行研究是很有必要的。     

Fabrication of patterned single-walled carbon nanotube films using electrophoretic deposition

Thin films of chemically functionalized single-walled carbon nanotubes (SWNTs) were fabricated by using a direct current (dc) electrophoretic deposition method. SWNTs were shortened and then functionalized with acid chloride group to combine with the amine group-terminated gold substrate. Silica nanospheres with a diameter of about 190nm were arrayed on gold substrate to pattern a thin SWNT film. Periodically patterned SWNT film was eventually produced and would be used in potential applications like electron emitters and large surface area electrodes.     

考虑天然气混氢的园区综合能源系统电制氢优化配置

电制氢和天然气混氢技术在促进可再生能源消纳、降低系统碳排放量方面具有良好的理论研究和工程应用前景。面向含高比例可再生能源的园区综合能源系统,提出一种计及天然气混氢及跨季节存储的电制氢优化配置方法。首先梳理了含氢园区综合能源系统的运行框架和能量流动关系,建立园区内部能源生产、转换与存储设备的数学模型,其次以设备的年化投资成本、园区综合能源系统的年度运行成本和碳交易成本最优为目标,提出电制氢优化配置模型。最后通过算例分析表明电制氢及天然气混氢技术的引入可提升可再生能源的消纳能力,降低系统的整体经济成本和碳排放量,并分析了电解槽投资成本、混氢体积分数上限以及经济性和低碳性成本权重系数变化对规划运行结果的影响。关键词：园区综合能源系统;电制氢;天然气混氢;碳交易;跨季节储氢;优化配置 中图分类号：TM732     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

纳米碳中的微观缺陷结构特征

测定了定向石墨和纳米碳的正电子寿命谱,结果表明,热解法制备的纳米碳存在开空间小于单空位的自由体积以及开宽间相当于约１０个空位聚集体全的微孔洞,比较了热解法制备的纳米碳,ＵＦＰ冷压法制备的纳米Ｆｅ和纳米ＴｉＯ２以有非晶晶化法制备的纳米ＮｉＰ的缺陷结构特征,结果为纳米ＮｉＰ中缺陷的电子密度最高,纳米Ｆｅ和纲米ＴｉＯ２次之,纳米碳的最低,纳米碳中的缺陷浓度最高,纳米Ｆｅ和纳米ＴｉＯ２的次之,纳米ＮｉＰ的     

Evanescent wave sensor based on permanently bent single mode optical fiber

A novel refractive index sensing scheme based on evanescent wave interaction through locally and permanently bent single mode optical fibers is proposed. Local and permanent bends in single mode optical fibers enable significant power coupling between core and cladding modes. Order and number of excited cladding modes depend on bend features and determine the field profile at the output of the bent region. This in turn constitutes a simple mechanism to tailor the field distribution in single mode optical fibers useful for spatial light modulation. Moreover, since guided cladding modes are strongly influenced by the surrounding refractive index (SRI), the power transmitted at the output of the bent region as well as its dependence on the optical wavelength are strongly sensitive to the SRI opening new scenarios in sensing applications.     

Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors

A new approach for building a bio-conductive interface for enzyme immobilisation is described. This strategy permits very simple preparation of the enzyme biosensor and also reveals direct electron transfer features. A graphite-epoxy resin composite (GrEC) electrode modified with functionalised multi-wall carbon nanotubes (MWCNTs) immobilised by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide together with N-hydroxysuccinimide (EDC–NHS) in a chitosan (Chit) matrix was prepared and characterised by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of hexaammineruthenium (III) chloride. It was then used as a base for glucose oxidase (GOx) immobilisation by the simple method of crosslinking with glutaraldehyde (GA) with bovine serum albumin (BSA) as carrier protein. The resulting mediator-free biosensor was applied to the determination of glucose in amperometric mode at different applied potentials and the mechanism of reaction was also investigated by cyclic voltammetry, with and without dissolved oxygen in solution. Analytical parameters, as well as reproducibility, repeatability and stability were determined. Interferences were assessed using different compounds usually present in natural samples, such as wines, juices or blood, in order to evaluate the selectivity of the developed biosensor. The novel combination of carbon nanotubes immobilised with chitosan crosslinked with EDC–NHS and glucose oxidase immobilised by crosslinking with glutaraldehyde offers an excellent, easy to make biosensor for glucose determination without interferences.     

分布式光纤振动传感系统的多级零频点定位研究

为了减少直线结构Sagnac分布式光纤传感系统的定位误差,提出一种多级零频点的优化方法,通过分析直线结构Sagnac分布式光纤传感定位原理,确定固定的采样速率下离散化是造成定位误差大的原因.并分析得出振动信号频域曲线会周期出现多个零频点,进而对振动定位的多级零频点优化方法进行了理论推导,阐明高倍零频点下的定位误差会有效减小.通过实验验证表明,在总长为11.769 km的传感光纤上,优化后的定位方法在不改变采样速率下可保证定位误差提升到±20 m范围内,可以基本满足系统对外界振动信号进行精确定位的要求.     

Linux下连续媒体文件系统研究

Linux是Internet时代最辉煌的成果之一,它已经成为Internet上最受欢迎的网络操作系统。人们通过Linux提供面向Internet的各种服务,范围从WWW到网上直播。但基于Linux的高质量视频点播服务（VOD）鲜见有人研究。文章正是在这种背景下提出了Linux下的连续媒体文件系统（LCMFS）,将其作为基于Linux的高质量视频点播服务系统的底层支撑。文章先介绍了与Linux相关的背景知识,接着对Linux的现有文件系统—Ext2文件系统的结构进行剖析,指出其在处理连续媒体文件时的不足之处,然后据此提出了LCMFS的设计思想和原则,并阐述了LCMFS的设计及实现方案,最后对LCMFS的性能进行了分析和测试。     

Polarized light imaging of white matter architecture

Polarized light imaging (PLI) is a method to image fiber orientation in gross histological brain sections based on the birefringent properties of the myelin sheaths. The method uses the transmission of polarized light to quantitatively estimate the fiber orientation and inclination angles at every point of the imaged section. Multiple sections can be assembled into a 3D volume, from which the 3D extent of fiber tracts can be extracted. This article describes the physical principles of PLI and describes two major applications of the method: the imaging of white matter orientation of the rat brain and the generation of fiber orientation maps of the human brain in white and gray matter. The strengths and weaknesses of the method are set out.