管材超声波分层缺陷检测中盲区的构成探析

管材超声波分层检测作为控制产品质量的关键步骤,必须引起相关从业人员的重视,特别是要重点分析分层缺陷检测中盲区的构成原因和分布特征。只有这样,才能切实保证检测结果的准确性,更好地控制管材质量。通过对超声波分层缺陷检测的重要性进行阐释,分析了其中盲区的构成和分布等问题。     

壳聚糖固定化脲酶生物传感器选择性测定铜离子

基于重金属对脲酶的抑制作用,研制了用于测定铜离子的生物传感器。该生物传感器的制备以壳聚糖为载体,将脲酶固定于pH电极表面。由于壳聚糖对Cu2+的富集,该生物传感器展现出高灵敏度。在样品溶液中加入5 mmol/L NaI,可以消除Hg2+和Ag+的干扰,从而实现Cu2+的选择性检测。在0.005～0.5μg/mL的浓度范围内,脲酶活性的抑制率与Cu2+浓度的对数呈良好的线性响应关系,其检出限为0.002μg/mL。将使用后的生物传感器浸泡于0.5 mmol/L的EDTA溶液再生5 min,被Cu2+抑制的脲酶的活性可以得到恢复。     

搬运机器人在钻杆生产线物料输送系统中的应用

针对钻杆生产线中物料输送的特点和难点,设计了基于搬运机器人的智能输送系统,介绍了系统的组成、工作流程、以及Profibus总线配置。调试表明,该系统能够满足搬运物料的设计目的,对提高生产效率具有较高的应用价值。     

非金属电镀用导电漆的研制

介绍了导电漆、作为导电填料的片状镀银铜粉的制备工艺流程。分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。结果表明,当镀银铜粉的粒径为400目、质量分数在57%~65%之间,钛酸酯偶联剂的质量分数为10%时,所得涂膜的导电性能最佳。加入含C-18的油酸可以使导电漆长期贮存而电阻值不变。经检测,所得涂膜具有良好的性能:附着力1级,硬度1 H,柔韧性1 mm,冲击强度50 kg/cm2,膜厚10~15μm,漆膜表面每厘米电阻0.15Ω,每分米电阻0.47Ω。指出了导电漆应用过程中的注意事项。     

Copper ⇌ Alkali Ion Exchange of Alkali Aluminosillcate Glasses in Copper-Containing Molten Salt: I, Monovalent Copper Salt, CuCl

Cu⁺⇌ R⁺ (R = Li, Na, and K) ion exchange experiments were conducted for 20R₂O·10Al₂O₃·70SiO₂ glasses in molten CuCl at 550°C in air and nitrogen atmospheres. The depth profiles of the copper incorporated into glasses were determined with an electron microprobe X-ray analyzer. The total amount of diffusing copper, M _t, strongly depended on the type of alkali ion in the glass and the ion-exchange atmosphere; i.e., M _t increased with increasing cationic size in the order Li < Na < K and M _t was greater in air than in nitrogen. The Cu ⇌ R⁺ ion exchange kinetics are discussed in detail.     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

管道内穿管修复技术的应用

为解决城市地下金属管道由于常年连续运行时间长、防腐技术落后情况下产生漏铁、穿孔腐蚀等问题,阐述了利用管内穿管的先进技术解决地下管道的修复问题.该技术经应用后,施工质量满足使用要求,具有推广价值.     

生箔机的张力控制

对生箔机在铜箔生产过程中的铜箔张力进行动态分析,揭示出转矩、铜箔张力、实时卷绕半径之间的关系.建立锥度张力控制数学模型,提出锥度张力控制策略,并对其积分分离PID控制算法进行仿真,结果证明,该控制策略可以有效地避免积分的积累.     

230 kt/a烟气制酸系统的运行及改造情况

介绍230kt／a诺兰达炉铜冶炼烟气制酸装置的运行及技术改造。装置采用稀酸洗净化、ⅣⅠ-Ⅲ Ⅱ“3 1”两转两吸工艺流程，运行中发现板式酸冷却器堵塞、电除雾器腐蚀、气体换热器积酸和漏气等现象，通过更换为阳极保护管壳式酸冷却器、在电除雾器前增设湍冲洗涤器、调整换热管的喷铝成分等措施，收到良好的效果。