Antiwear Action of Mineral Lubricants Modified by Conventional and Uncoventional Additives

The authors of this paper investigated the influence of esters of rapeseed oil fatty acids on the lubricating properties of mineral lubricants containing chosen AW/EP additives. Methyl esters, ethylene glycol esters, and glycerol esters as well as some commercial AW/EP packages based on zinc dialkyldithiophosphate, S–P organic compounds, and sulphurized esters of fatty acids were tested. The tribological tests were carried out with the use of a four-ball machine. Antiwear (AW) properties of tested compositions were determined using their limiting load of wear (G_oz(40)). It appears that the AW action of esters of rapeseed oil fatty acids depends on their structure. The best AW action is shown by compositions of mineral oil lubricants containing AW/EP additives and methyl esters of rapeseed oil fatty acids. The SEM/EDS analysis of the scar surface layer indicated that the presence of these esters in lubricants causes a change in the interaction between AW/EP additives and the metal surface. These observations were confirmed by the XPS surface analysis.     

活性炭载体的超声波处理对Pt／C催化剂活性的影响分析

通过对活性炭载体进行不同条件的超声波处理获得了具有不同表面化学性质的载体，使用比表面积（BET）、酸碱滴定等技术手段对载体的物理化学性质进行了表征。将经过超声波处理的活性炭载体制备成Pt／C催化剂，并将催化剂直接用于催化反应，考察了活性炭载体的不同超声波处理条件对Pt／C催化剂性能的影响。实验发现，活性炭载体经过超声波处理后，表面灰分含量、pH值和中孔孔容有较大的变化；使用经过60min超声波处理后中孔孔容较大的活性炭作为载体制备的Pt／C催化剂，在催化加氢反应性能测试中显示了最高的催化活性。在此基础上，就活性炭载体的超声波处理对Pt／C催化剂活性的影响进行了讨论。     

Effect of Microstructure on the Accelerated Creep of 20CrMoV12‐1 and P 91 Steels

In the initial part the change of microstructure for steel X20 CrMoV 121 is discussed in terms of the distribution of carbide precipitates and its effects on accelerated creep resistance and hardness are presented. In the following, experimental results of microstructure and accelerated creep resistance are presented for the steels X20CrMoV 121 and P91 annealed for up to 8760 hours at 650°C and 750°C before the testing. A similar evolution of the distribution of carbide particles of a size above 102 nm is found for both steels, while the accelerated creep resistance is diminished much stronger for the steel X20CrMoV 121. This difference is due to a greater stability of NbC than that of VC precipitates, both related to the evolution of the chemical composition of complex chromium, molybdenum and iron carbide particles.     

CAST的工作原理与设计计算

详细论述了循环式活性污泥法(CAST)的工作原理，对该工艺的设计计算作了探讨，提出了设计方法，并提供了有关计算公式和操作时间分配。     

火灾中考虑整体性的钢梁破坏形态研究

1990年英国broadgate火灾之后,结构整体性以及由于温度而在整体结构中产生的附加应力得到了人们的重视。处于整体结构中的梁的破坏形态与单个构件的梁的破坏形态有较大差别,当考虑梁的悬链线效应时其抗火承载力明显提高。文章采用大型通用有限元程序ANSYS,对T.C.HLiu所做试验进行了验证,表明了有限元计算悬链线效应的可靠性,同时通过计算分析,提出了处于整体结构中钢梁在火灾中破坏的5个阶段,并给出了钢结构防火的概念设计建议。     

标准型直燃机在严寒地区应用探讨

介绍了标准型直燃机的分类、原理及长庆至呼和浩特输气管道工程冷冻供热站的设计实例 ,重点论述了标准型直燃机在严寒地区使用的利弊     

The applicability of the ITS-90 method to platinum resistance thermometers of different purity

The static characteristics of platinum resistance thermometers with different platinum purities were measured. It is shown that in the 0–420°C range the ITS-90 method gives an error of less than 0.01°C, while in the 0–230°C range the error is less than 0.006°C. __________ Translated from Izmeritel’naya Tekhnika, No. 12, pp. 33–36, December, 2006.