Humans: the missing link in manufacturing simulation?

Computer based discrete event simulation (DES) is one of the most commonly used aids for the design of automotive manufacturing systems. However, DES tools represent machines in extensive detail, while only representing workers as simple resources. This presents a problem when modelling systems with a highly manual work content, such as an assembly line. This paper describes research at Cranfield University, in collaboration with the Ford Motor Company, founded on the assumption that human variation is the cause of a large percentage of the disparity between simulation predictions and real world performance. The research aims to improve the accuracy and reliability of simulation prediction by including models of human factors.     

The Content Driven Mobile Internet

The development of future mobile networks will be driven, in large part, by content and web based services. In this paper, we examine several performance, scalability and architectural challenges faced by future mobile web applications and how advanced mobile content delivery techniques can address these challenges. We review existing content delivery using a taxonomy that consists of three categories: network scaling, end system acceleration, and content and protocol optimization. While wireline content delivery focuses on network and server scalability, mobile content delivery will likely benefit most from optimizing radio link usage. We also present our ongoing work in this area, which extends the functionality of edge caching to the terminal, uses user interest correlation information to maintain low terminal power consumption and adds a new dimension to radio resource management. This revised version was published online in August 2006 with corrections to the Cover Date.     

纳米Fe2O3对镁铬耐火材料烧结及力学性能的影响

在镁铬耐火材料中添加纳米Fe2O3,研究了它对镁铬耐火材料烧结性能与常温力学性能的影响.结果发现,在相同的工艺条件下,加入1%(外加)的纳米Fe2O3即可使镁铬砖的烧成温度降低150℃左右,并在相同烧成温度下能使试样的常温抗折强度和耐压强度大幅度提高.分析认为,在镁铬耐火材料中添加少量纳米级Fe2O3,可促进MgO-FeO固溶体中Cr3+和Al3+含量的提高,增强镁铬砖的直接结合程度,从而提高其力学性能.     

渤中28－1（BZ28－1）油田N6H水平井动态分析

本文以渤中２８－１（ＢＺ２８－１）油田Ｎ６Ｈ水平井为例，从多方面对该井的动态和产能变化进行了系统分析，所用的方法对水平井动态分析有一定的指导意义。     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

Examining the effects of caching,compression and popup filtering on internet surfing

Over the years the number of Web users has increased dramatically unfortunately leading to the inherent problem of congestion. This can affect each user's surfing experience. This paper investigates download times associated with a web request, identifies where delays occur, and provides guidelines which can be followed by web developers to enable a faster and more efficient download and service for their users. We conclude that delays in Internet traffic and congestion can often be attributed to poorly developed sites (e.g. excessive image size). Copyright © 2005 John Wiley & Sons, Ltd.     

Speed–accuracy tradeoff in Fitts’ law tasks—on the equivalency of actual and nominal pointing precision

Pointing tasks in human–computer interaction obey certain speed–accuracy tradeoff rules. In general, the more accurate the task to be accomplished, the longer it takes and vice versa. Fitts’ law models the speed–accuracy tradeoff effect in pointing as imposed by the task parameters, through Fitts’ index of difficulty (I_d) based on the ratio of the nominal movement distance and the size of the target. Operating with different speed or accuracy biases, performers may utilize more or less area than the target specifies, introducing another subjective layer of speed–accuracy tradeoff relative to the task specification. A conventional approach to overcome the impact of the subjective layer of speed–accuracy tradeoff is to use the a posteriori “effective” pointing precision W_e in lieu of the nominal target width W. Such an approach has lacked a theoretical or empirical foundation. This study investigates the nature and the relationship of the two layers of speed–accuracy tradeoff by systematically controlling both I_d and the index of target utilization I_u in a set of four experiments. Their results show that the impacts of the two layers of speed–accuracy tradeoff are not fundamentally equivalent. The use of W_e could indeed compensate for the difference in target utilization, but not completely. More logical Fitts’ law parameter estimates can be obtained by the W_e adjustment, although its use also lowers the correlation between pointing time and the index of difficulty. The study also shows the complex interaction effect between I_d and I_u, suggesting that a simple and complete model accommodating both layers of speed–accuracy tradeoff may not exist.     

Dynamic Survivability in WDM Mesh Networks Under Dynamic Traffic

Network survivability is a crucial requirement in WDM mesh networks. In this paper, we systematically consider the problem of dynamic survivability with dynamic single link failure in WDM networks under dynamic traffic demands. Specifically, we investigate various protection schemes, such as dedicated path protection (DPP), shared path protection (SPP), dedicated link protection (DLP), shared link protection (SLP), and two restoration schemes, path restoration (PR) and link restoration (LR). Moreover, two new shared protection methods are proposed, i.e., SRLG-based shared link protection (SRLG-SLP) and SRLG-based shared path protection (SRLG-SPP). The SRLG (shared risk link group) constraint defines the availability of protection resources to a working path, which requires that any two working paths sharing the same risk of failure (or in the same SRLG) cannot share the same protection resources. Furthermore, in our study, we consider a more practical dynamic single-link failure model, in which the link-failure-interarrival time and link-failure-holding time are considered as two independent parameters. Based on this link-failure model, extensive simulations are done to analyze and compare the dynamic survivable performance of various protection and restoration schemes. Resource utilization, protection efficiency, restoration efficiency, and service disruption ratio are employed as survivable performance metrics versus traffic load, link-failure frequency, and link-failure reparation time to evaluate the survivable performance. Many meaningful results are given. In addition, we show that the developed SRLG-SLP and SRLG-SPP protection schemes perform very well in terms of protection efficiency and service disruption ratio, while sacrificing some performance in terms of resource utilization.     

Age effects in coding tasks: Componential analysis and test of the sensory deficit hypothesis.

Multiple forms of a symbol-digit substitution task were used to provide a componential analysis of age differences in coding task performance. The results demonstrated age differences in feature encoding, memory, and visual search. A 2nd experiment was conducted with young adults to investigate a sensory deficit as a locus of age differences. The spatial contrast sensitivity deficit of older adults was simulated on forms by applying a digital filter. Persons in the age-simulated contrast condition performed worse than those in the normal contrast condition. The stimulus degradation effect was linked to visual search speed. The study illustrates the utility of componential analysis and offers direct support for the hypothesis that sensory deficits affect performance on tasks used to assess intelligence (PsycINFO Database Record (c) 2010 APA, all rights reserved)