不同表面预处理对有机电致发光显示器性能的影响

从生产角度研究了基板表面的预处理工艺对OLED性能的影响,分别用UVOzone、氧Plasma以及两者相结合的方式对基板进行表面处理,并按照生产工艺制作器件,从接触角、方阻以及光电特性等测试结果对各种表面处理的样品进行比较。结果表明以上处理都改善了器件性能,不同程度提高了器件的清洁度、亮度和发光效率,其中UVOzone和氧Plasma结合的方式处理效果最为显著,器件在10V时亮度达到79920cd/m2,比其他两种处理方式亮度提高约25%。     

Conventional Electron Microscopy and Electron Holography of Organic Solar Cells

Organic solar cells are a promising route towards large‐area and low‐price photovoltaic systems. The devices are composed of at least two layers: the hole‐transport layer and the electron‐transport layer. The light absorption can occur in one or both layers. At the interface of the layers the excitons are separated into charge carriers, and every layer deals with one type of carrier. Higher efficiencies of the separation process can be obtained by using a mixed layer containing both materials to obtain a very high interface area. Although the structure of the mixed layers used plays a crucial role for the device performance, until now the morphologies have not been elucidated. In order to correlate physical and optical findings with structure and morphology for the materials in question, electron microscopy experiments were performed on the single components as well as on the layer systems. The conventional electron microscope is a poor phase microscope. As consequence, weak‐phase objects like organic molecules have to be stained or imaged under strong defocus to produce an observable contrast. Artifacts caused by chemical staining and the appearance of Fresnel diffraction using the defocus technique represent the main problems of conventional microscopy. These artifacts can be avoided using electron holography. Holograms of ultrathin sections of thin layers composed of organic dye molecules were recorded. Subsequently, the phase images were reconstructed. In this manner, we succeeded in obtaining high‐contrast electron micrographs without applying staining or defocus. In addition, holograms of crystalline C₆₀ and zinc phthalocyanine were successfully recorded. Holography has been shown to be a useful tool to image beam‐sensitive and weak‐phase objects without artifacts.     

Tuning the Dimensions of C60‐Based Needlelike Crystals in Blended Thin Films

A new ordered structure of the C₆₀ derivative PCBM ([6‐6]‐phenyl C₆₁‐butyric acid methyl ester) is obtained in thin films based on the blend PCBM:regioregular P3HT (poly(3‐hexylthiophene)). Rapid formation of needlelike crystalline PCBM structures of a few micrometers up to 100 μm in size is demonstrated by submitting the blended thin films to an appropriate thermal treatment. These structures can grow out to a 2D network of PCBM needles and, in specific cases, to spectacular PCBM fans. Key parameters to tune the dimensions and spatial distribution of the PCBM needles are blend ratio and annealing conditions. The as‐obtained blended films and crystals are probed using atomic force microscopy, transmission electron microscopy, selected area electron diffraction, optical microscopy, and confocal fluorescence microscopy. Based on the analytical results, the growth mechanism of the PCBM structures within the film is described in terms of diffusion of PCBM towards the PCBM crystals, leaving highly crystalline P3HT behind in the surrounding matrix.     

纸浆漂白废水中有机氯化物的排放与控制

本文概述了纸浆漂白废水的特性，以及影响其有机氯化物发生量的因素。     

Processing and microstructure of non-oxide ceramic fibres

Research and development efforts on high-temperature, oxidation-resistant fibres have increased over the past decade due to the demand for light-weight, stiff and strong composite materials in aerospace applications. Varieties of ‘high-performance’, continuous, non-oxide fibres with low-density, high tensile strength and tensile modulus have been developed either from organic precursors or via chemical vapour deposition for fabrication of ceramic matrix composites. Fibres derived from polymer precursors (e.g. Nicalon, Tyranno, HPZ) are small in diameter (compared to CVD monofilaments) and are ideally suited for ceramic composites. Processing, microstructural stability and mechanical properties of these newly developed SiC and Si₃N₄ base fibres are briefly reviewed in this paper.     

构造作用对油气生成和运聚的影响

有机质从埋藏开始，就处于极其复杂的地球物理化学场中，环境提的能量，一是热量，二是机械能，机械能，主要是通过机械力作用传递给系统的，另外还以机械波的形式赋予系统一定的机械能。当发生断褶构造运动时，机械力对油气运移的影响尤为突出，它经能量的迁移转化，促成了包括机械力降解和地应力驱动等一系列的连锁反应，制造了一次次高效的成油（生运）事件，本文以突变论为着眼点，按照改造控制建造的思路，大胆提出构造运动制造生排烃事件，成就含油气系统的假说。     

锂离子电池有机电解液成膜添加剂的研究现状

文章综述了锂离子电池有机电解液成膜添加剂的作用原理，具体介绍了CO2、SO2、VC化合物、卤化物、有机铜盐以及马来酐等添加剂的研究现状。