实体造型中一种等距曲面求交优化算法

主要针对实体造型系统中曲面求交，通过分析连续变化曲的等距曲面的特征信息，提取连续变化曲面不同瞬间交线环的相关性，并使用特征点来标识交线环的拓扑信息，将拓扑信息和跟踪法结合，设计了一种优化的等距曲面求交算法。     

平顶光谱响应的光学交叉复用滤波器

提出了一种设计光学交叉复用滤波器interleaver的新结构。该结构采用具有环形波导的单级MZ干涉仪设计而成。比较3级、5级及7级interleaver的功率透射谱发现,级次越高平顶效果越好;同时通带和阻带越陡,越接近方波。结果表明,只要给出期望得到的这种结构的椭圆半谱带滤波器交叉口的传递函数．便可以得到相应的设计参数;随着级数的增加其功率透射谱具有接近方波的平顶效果,适宜设计interleaver。     

SOI数模混合集成电路的串扰特性分析

采用二维TMA Medici模拟软件对SOI结构的串扰特性进行了分析.模拟发现随着频率的增加,SOI的埋氧化物对串扰噪声几乎不起隔离作用,同时,连接SOI结构的背衬底可以在很大程度上减小串扰的影响.还对减少串扰的沟槽隔离工艺、保护环及差分结构的有效性进行了比较分析,对一些外部寄生参数对串扰的影响也进行了研究.并给出了SOI结构厚膜和薄膜结构体掺杂浓度对噪声耦合的影响,所得到的结果对设计低噪声耦合的SOI数模混合集成电路具有指导性的作用.     

双偏心轮驱动的机械延时机构在安全执行机构中的应用

介绍了一种可用于驱动钟表机构实现机械延时的双偏心轮机构,经过对该机构的设计优化,使其不仅能够在有横向过载干扰的条件下实现预定的运动,且做到了机械延时时间基本不受干扰影响,达到了抵消横向过载干扰的作用。     

声光调谐滤波器用于OXC中的串音分析

分析了声光可调谐滤波器（AOTF）用于光交叉连接（OXC）系统中的各种串音。讨论了各种相应的串音抑制方法。在波长分组的概念基础上提出了一种新的不对称波长扩展OXC结构。     

A Scheduling Framework for UWB & Cellular Networks

The max-min fair scheduling problem in wireless ad-hoc networks is a non-convex optimization problem. A general framework is presented for this optimization problem and analyzed to obtain a dual problem, which involves solving a series of optimization sub-problems. In the limit of infinite bandwidth ( ), the scheduling solution reduces to simultaneous transmission (spread spectrum) on all links (Negi and Rajeswaran, INFOCOM '04 (March 2004)). This motivates the analysis of the scheduling problem in the Ultra Wide Band (UWB) regime ( , but finite), a model for certain practical radios. A quadratic (in 1/W) lower bound to the single link capacity function is developed, which simplifies the dual sub-problem to a quadratic optimization (Negi and Rajeswaran, GLOBECOM '04, (Dec. 2004)). The solution to this sub-problem is then obtained under both total power and power spectral density constraints. This solution is utilized to iteratively construct the schedule (sub-band sizes) and power allocation, thus optimally solving the UWB max-min fair scheduling problem, to within any desired precision. Simulations on medium sized networks demonstrate the excellent performance of this scheme. A cellular architecture (not necessarily UWB) may also be considered in this framework. It is proved that Frequency Division Multiple Access is the optimal scheduling for a multi-band cellular architecture. This work was supported in part by the National Science Foundation under Career award 0347455. Arjunan Rajeswaran received his Masters degree in Electrical and Computer Engineering from Carnegie Mellon University in 2003. Since August 2003, he has been pursuing his doctoral research at Carnegie Mellon. His reserach interests lie in the area of wireless networks. His focus is in the application of information and communication theoretic tools towards wireless network design. Several IEEE publications reflect his curent research on Medium Access Control design and performance. Arjunan received the best student paper award at IEEE/ACM Broadnets 2004. Gyouhwan Kim received his B.S. and M.S. degree in Electronic Engineering from Sogang University in Korea, in 1994 and 1996, respectively. Since 1996, he has been working in the CDMA cellular system development team in Samsung Electronics. Currently, he is also working toward the Ph.D degree in the Department of Electrical and Computer Engineering at Carnegie Mellon University. His main research interests are in wireless networks and communication theory. Rohit Negi received the B.Tech. degree in Electrical Engineering from the Indian Institute of Technology, Bombay, India in 1995. He received the M.S. and Ph.D. degrees from Stanford University, CA, USA, in 1996 and 2000 respectively, both in Electrical Engineering. He has received the President of India Gold medal in 1995. Since 2000, he has been with the Electrical and Computer Engineering department at Carnegie Mellon University, Pittsburgh, PA, USA, where he is an Assistant Professor. His research interests include signal processing, coding for communications systems, information theory, networking, cross-layer optimization and sensor networks.     

多层印制板叠层设计对信号完整性的影响研究

基于优化多层印制板叠层设计改进信号完整性的目的,提出了通过叠层设计中调整印制板各层导线宽度、基板厚度、填充层厚度和绝缘材料厚度4个参数值,以改变各层信号传输路径特性阻抗的方法,结合工程实例,通过在特性阻抗连续和阻抗不连续两种情况下仿真的对比试验,验证了叠层设计优化方法的有效性.     

一种沙漠场景地杂波雷达散射截面的仿真方法

利用三角形小平面模型、修正的几何光学模型与γ-f角度截断后向散射系数模型和沙漠场景的数字高程模型数据,对沙漠场景下地杂波雷达散射截面进行了仿真。散射特性模型结合场景几何模型计算得到的场景RCS矩阵图表明,仿真结果与沙漠场景特殊的地形特性和周期性特征基本符合,验证了该方法的有效性。     

强背景噪声环境下的线性调频信号检测

基于线性调频(LFM)信号Wigner-Ville变换的零频处仍保存原信号所有信息的结论，提出了改进的基于互Wigner-Ville分布线性调频信号的检测方法。该方法具有较好的抗噪声能力，在更低的信噪比下，可以实现单个或多个强度相差较大的线性调频信号的检测。仿真实验的结果证明了算法的有效性。     

基于fan4800C的正激式开关电源的设计

介绍了一种基于fan4800C的双晶正激式多路输出AC/DC的开关电源的原理与设计方法。分析了fan4800C的特性和工作原理,并给出了它的设计原理框图及具体设计过程,最后给出了该电源模块的实测波形及测试技术指标。