皂化膜萃取法制备环烷酸钕的研究

提出了一种在室温条件下 ,皂化膜萃取法合成稀土橡胶主催化剂环烷酸钕的新工艺 ,并对其影响因素和反应机理进行了研究。采用皂化萃取工艺 ,可提高Nd3 +的利用率 ,并可根据皂化率任意控制游离酸浓度。采用膜萃取工艺可减少环烷酸钕中的含水量 ,制得的环烷酸钕具有良好的二烯烃定向聚合活性。     

美国三元乙丙防水片材接缝技术

介绍了美国三元乙丙防水片材接缝技术的发展历程并介绍了二十世纪八十年代以来有关的专利技术和测试方法。     

分离有机水溶液的聚离子复合膜（Ⅱ）

本文研究用聚离子昨合膜进行渗透汽化分离乙醇水溶液的特性，探讨了进料温度、浓度、膜后压力，进料液循环量等操作条件对膜分离性能的影响。     

离子交换膜间水的电离及其应用

本文通过分析纯水的电离,讨论了普通电渗析(ED)和填充床电渗析(EDI)中水的电离现象及其相关 机理。EDI过程中水电离产生的H+和OH-离子可以自再生离子交换树脂。文中简单介绍了已得到产业化的EDI 技术和正在推广中的离子交换树脂的电再生技术。     

Composite polymer electrolytes based on the low crosslinked copolymer of linear and hyperbranched polyurethanes

Low crosslinked copolymer of linear and hyperbranched polyurethane (CHPU) was prepared, and the ionic conductivities and thermal properties of the composite polymer electrolytes composed of CHPU and LiClO₄ were investigated. The FTIR and Raman spectra analysis indicated that the polyurethane copolymer could dissolve more lithium salt than the corresponding polymer electrolytes of the non crosslinked hyperbranched polyurethane, and showed higher conductivities. At salt concentration EO/Li = 4, the electrolyte CHPU30‐LiClO₄ reached its maximum conductivity, 1.51 × 10^?5 S cm^?1 at 25°C. DSC measurement was also used for the analysis of the thermal properties of polymer electrolytes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3607–3613, 2007     

多孔陶瓷分离膜

多孔陶瓷膜由于其优良的耐高温、耐腐蚀、耐微生物侵蚀等性质，近年来被快速地应用于分离领域。本文介绍其制备方法、性能测定及应用前景。     

离子膜使用过程中起泡的原因及危害

分析并列举了离子交换膜在使用过程中鼓泡的原因，阳极液质量浓度；pH值；阴极液质量浓度；电流密度；开停车及盐水质量等因素都可以造成膜鼓泡，形成针孔。提出了相应的预防措施。     

Experimental and theoretical analysis of the operation of a natural gas cogeneration system using a polymer exchange membrane fuel cell

This paper reports experimental and numerical results of an investigation of five identical cogeneration systems using PEM (Polymer Exchange Membrane) fuel cells and running on natural gas. The natural gas is reformed locally to produce hydrogen. The accuracy of numerical results is validated by comparison with experimental data and the system performances are analysed in terms of electrical, thermal and total efficiencies. It appears that the energetic performances are low, particularly at low current. Simple solutions for enhancing the system electrical performances by modifying control laws are proposed.     

疏水缔合聚丙烯酰胺溶液性质研究

用粘度法和核孔膜过滤法研究了实验室自制相对分子质量约1000万的疏水缔合聚丙烯酰胺(HAP)溶液的缔合效应,用粘度计考察了电解质浓度、温度和剪切速率对HAP溶液表观粘度的影响,并与相同测试条件下相对分子质量为1770万的部分水解聚丙烯酰胺3530进行对比。结果表明:HAP溶液在70℃的高温和矿化度为5727的高盐条件下,在1000mg/kg附近存在一临界缔合浓度,在临界缔合浓度以上,HAP溶液粘度迅速增加;而3530不存在临界缔合浓度,粘度增加缓慢。浓度为1250mg/kg的HAP溶液通过核孔膜20mL的过滤时间是347.3min,而相同浓度下3530的过滤时间仅为2.1min。浓度为1000mg/kg的HAP溶液即使在矿化度为30000、70℃的高温、30r/min转速的条件下,粘度仍达到32.8mPa·s,而聚合物3530的粘度仅有4.11mPa·s;当剪切速率增加到140r/min、温度为70℃,用矿化度为5727的模拟采出水配制的HAP溶液的粘度为9.21mPa·s,而3530溶液的粘度仅5.18mPa·s。HAP具有良好的耐温抗盐抗剪切能力。