自交联水性聚氨酯-含氟丙烯酸酯乳液的制备及研究

以异佛尔酮二异氰酸酯(IPDI)、聚碳酸酯二醇(PCDL)、二羟甲基丁酸(DMBA)、1,4-丁二醇(BDO)、甲基丙烯酸羟乙酯(HEMA)为原料合成了双键封端的聚氨酯预聚体;以N-羟乙基丙烯酰胺(HEAA)作交联剂,配合甲基丙烯酸六氟丁酯(HFBMA)等单体进行乳液共聚,制备了自交联水性聚氨酯-含氟丙烯酸酯(FPUA)乳液。研究了HFBMA和HEAA用量对膜耐水性、热性能以及力学性能的影响。结果表明:PUA乳液的耐水性和疏水性随HFBMA用量的增加而增加;随着HEAA用量增加,胶膜的热稳定性增加,拉伸强度增加,伸长率下降;当胶膜中HFBMA质量分数为12%,且HEAA质量分数为2.6%时,乳液的粒径为128 nm,乳液的稳定性较好;胶膜的水接触角为107.6°,吸水率为4.5%,拉伸强度为25.6 MPa,断裂伸长率为268%,10%热失重温度299.6℃。     

Subtle variations in the structure of crosslinked epoxy networks and the impact upon mechanical and thermal properties

Presented here is an investigation of the structure–property relationships of crosslinked networks using three bi-functional glycidyl ether aromatic epoxy resins, two bi-aryl and one tri-aryl, cured with bi- and tri-aryl amines. Subtle changes to the monomer chemistry including changing aromatic substitution patterns from meta to para, methylene to isopropyl and isopropyl to ether were explored. Changing an epoxy resin backbone from methylene to isopropyl enhances backbone rigidity thus increasing glass transition temperature (T_g), yield strength, and strain despite reducing modulus. Changing meta-substitution to para increases T_g and yield strain while leaving strength unaffected and reducing modulus. Changing isopropyl linkages to ether reduces modulus, strength, T_g, and yield strain reflecting increased molecular flexibility. Using three instead of two aromatic rings increases the molecular weight between crosslinks thereby decreasing T_g and yield strain while increasing modulus and strength. Despite the complexities of multiple systems for varying epoxy resins and amine hardeners, the effect upon network properties is explained in terms of short- and long-range molecular and segmental mobility, crosslink density, and equilibrium packing density. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48874.     

Swelling behavior of expandable poly(methyl methacrylate-acrylic acid)/polymethyl methacrylate bio-composites with different crosslinking densities

The volume shrinkage of poly(methyl methacrylate-acrylic acid) (PMMA) bone cement was mainly tackled by the different types and contents of the hydrophilic additives. While the crosslinking density was assumed to regulate the hydrophilic group amounts and 3D network structures in the additives, which influenced the absorption and swelling capacity of the PMMA-based bone cement. In this study, the expandable PMMA/polymethyl methacrylate bio-composites (EBC) with different N, N-methylenebisacrylamide (MBA) contents were synthesized to investigate the relationship between the crosslinking density and swelling performance, and also promoted the absorption and swelling properties before the solidification of EBC. The results demonstrated that the equilibrium absorption ratio and the equilibrium swelling ratio both exhibited a normal distribution with the various MBA content. In addition, the controlled absorption ratio (7.3–60.2%) and swelling ratio (8.5–61.8%) of EBC could be obtained by altering crosslinking density in the system. Furthermore, EBC could obtain a similar equilibrium absorption ratio and equilibrium swelling ratio with different mechanical properties, which provided more options for meeting the requirements of EBC in different clinical settings.     

Synthesis and application of thermal latent initiators of epoxy resins: A review

Epoxy resin, which is extensively used in civil and industrial applications, shows excellent comprehensive performance, especially as a polymer matrix used in fiber-reinforced composites. A thermal latent initiator, used as an epoxy curing agent, has high storage stability and is widely applied in the preparation of epoxy-based blends and fiber-reinforced composites. In this review, the basic properties of epoxy resins and commonly used curing agents are discussed while progress on the synthesis of thermal latent initiators is reviewed in detail. Moreover, the curing mechanisms, thermal stability, and mechanical properties of epoxy resins with thermal latent initiators are also discussed.     

Effects of modified silica on the co-vulcanization kinetics and mechanical performances of natural rubber/styrene–butadiene rubber blends

Rubber blends are widely used for combining the advantages of each rubber component. However, to date, how to determine and distinguish the vulcanization kinetics for each single rubber phase in rubber blends during the co-vulcanization process is still a challenge. Herein, high-resolution pyrolysis gas chromatography–mass spectrometry (HR PyGC-MS) was employed for the first time to investigate the vulcanization kinetics of natural rubber (NR) and styrene–butadiene rubber (SBR) in NR/SBR blends filled with modified silica (SiO₂). The reaction rates of crosslinking of each rubber phase in NR/SBR were calculated, which showed that the crosslinking rates of NR were much lower than those of SBR phase in the unfilled blends and blends filled with unmodified and silane modified silica. Interestingly, the vulcanization rates of NR and SBR phase were approximately same in the vulcanization accelerator modified silica filled blends, showing better co-vulcanization. In addition, the vulcanization accelerator modified silica was uniformly dispersed and endowed rubber blends with higher mechanical strength compared to the untreated silica. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48838.     

Improved thin film stability of differently formulated,printed, and crosslinked polymer layers against successive solvent printing

Interface control remains a top challenge of solution-processed organic light emitting diodes (OLED) stacks since the device performance heavily relies on it. Film stability of an inkjet deposited and crosslinked layer against subsequent exposure to a suitable inkjet printed solvent has been investigated. Impact of processing solvent (solvent used to prepare the polymer layer) on solution-cast thin film properties has already been shown for polymer films. To our knowledge, this study is the first one analyzing thin films stability against solvent exposure using technology relevant materials processed via inkjet printing (IJP). The outcome of this research showed that the stability of the crosslinked films is affected by the solvent used for ink formulation. These findings are of great interest for multilayered semiconductors devices, such as OLEDs, field-effect transistors and dye-sensitized solar cells. Differential scanning calorimetry (DSC) was used to quantify the efficiency of the polymer crosslinking reaction in pure powder and in thin films, as processed from different solvents. Crosslinking efficiency measured by DSC correlated well with the deformation induced by the solvent and observed on layer surfaces. The interaction in solution between polymer and solvent has also been evaluated to explain its impact on thin film stability against successive solvent printing. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48895.     

戊二醛固着茧衣丝胶的工艺研究

用戊二醛作固着剂对茧衣进行丝胶固着,通过对戊二醛浓度和固胶温度的探索,得出了在茧衣不明显着色的前提下戊二醛固胶的较优工艺方案。     

红毛藻R-藻红蛋白的高效制备以及抗体标记与检测

采用硫酸铵盐析和DEAE-Sepharose阴离子交换柱层析相结合,从红毛藻(Bangia fusco-purpurea)中分离纯化到纯度系数(A565/A280)大于6.0的R-藻红蛋白。SDS-PAGE结果显示,其亚基分子量分别为19、21ku。用适宜摩尔浓度的异型双功能交联剂N-琥珀酰亚氨基-3-2-吡啶基二硫丙酸醇(SPDP)将纯化的R-藻红蛋白与羊抗小鼠IgG抗体交联,利用SDS-PAGE和荧光检测鉴定R-藻红蛋白与抗体的交联效果。结果显示:R-藻红蛋白能与羊抗小鼠IgG成功交联。分别采用Dotblot和Westernblot对R-藻红蛋白标记的抗体作为二次抗体,小鼠抗鲢鱼主要过敏原小清蛋白单克隆抗体为一次抗体;对鱼类小清蛋白进行免疫检测,结果显示:R-藻红蛋白标记的抗体能检测相关抗原的存在,且有良好的特异性。利用藻红蛋白荧光探针可缩短免疫杂交的检测时间,简化操作过程。     

交联型两性聚丙烯酸酯的制备及对纸张性能的影响

以聚乙烯醇（PVA）为高分子胶体稳定剂,甲基丙烯酸缩水甘油酯（GMA）为交联剂,丙烯酰胺（AM）、丙烯酸（AA）、丙烯腈（AN）、甲基丙烯酰氧乙基三甲基氯化铵（DMC）为共聚单体,通过无皂乳液共聚制备了交联型两性聚丙烯酸酯表面施胶剂。对阳离子基单体和交联性单体的用量、合成工艺条件等对纸张增强效果的影响进行了探讨。确定了较佳的合成条件：种子聚合法,w（PVA）=3%-4%,w（DMC）=2%-2.5%,w（GMA）=0.7%,反应温度85℃,反应时间5 h。通过差示扫描量热仪（DSC）、扫描电子显微镜（SEM）和粒度分布分析仪对乳液和纸张性能进行了检测与表征。实验证明,在pH值78条件下,以2%的聚合物乳液进行表面施胶时,可使环压指数、耐破度、抗张指数分别达到16.6 N·m/g、440 kPa、40.6 N·m/g,耐折度10次,与空白样相比均可提高30%以上。     

Gellan gum–O,O′‐bis(2‐aminopropyl)‐polyethylene glycol hydrogel for controlled fertilizer release

A gellan gum–Jeffamine superabsorbent hydrogel was obtained with different crosslink densities using different amounts of (1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide hydrochloride) and N‐hydroxysuccinimide. Infrared spectroscopy and thermal analysis confirm the crosslinking. A morphology analysis indicates denser structures for samples with higher crosslinking points. The swelling degree in high‐acyl gellan gum hydrogels was equivalent to 145 times their dry weight, and 77 times when low‐acyl gellan gum was used. Hydrogels also showed a 450 min water retention, as opposed to 280 min for pure water, evidencing good humidity control, suitable for use in arid climates. They also demonstrated a maximum release of commercial fertilizer of about 400 mg per gram for KH₂PO₄ and about 300 mg per gram for NPK 20‐5‐20. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45636.