Improved direct bonding method of Nd:YVO4 and YVO4 laser crystals

We succeeded in the fabrication of bonded laser crystals composed of a neodymium-doped YVO₄ laser crystal (Nd:YVO₄) and its host crystals YVO₄ by a newly developed dry etching technique using an argon ion beam. The optical distortion caused by the bonded interface of size 5 mm × 6 mm was estimated to be 0.05λ at 633 nm. From the comparison of laser performance pumped by a laser diode, the bonded crystals could increase the laser output power by nearly twice that of the non-bonded crystals with the same degree of polarization of 99.2%. To analyze the mechanism of the enhanced reduction of the thermal load in the bonded crystals, numerical simulations with a finite-element method were also performed.     

机械合金化过程中Fe70B30粉末晶粒尺寸和微观应变的研究

用Ｘ射线和电镜研究了Ｆｅ＿（７０）Ｂ＿（３０）粉末经不同时间高能球磨后晶粒尺寸和微观应力的变化。在机械合金化过程中，粉末的Ｘ射线衍射谱的宽度随球磨时间的增加逐渐加宽，这是晶粒细化和内部微观应力共同作用的结果。Ｘ射线衍射结果表明：随着机械合金化的进行，粉末的晶粒尺寸逐渐减小，球磨初期晶粒尺寸下降较快，经１５ｈ球磨，晶粒尺寸为２５ｎｍ，机械合金化进行到一定时间后晶粒尺寸下降缓慢，８０ｈ球磨后晶粒尺寸可达５ｎｍ。在机械合金化过程中球磨所造成的微观应变不大，球磨初期粉末的内应力随球磨时间增加而增加，当粉末粒子尺寸很小时，随球磨的进行粉末中的微观应变显著下降。     

掺钛蓝宝石激光晶体中夹杂物的分析

本文用大视场光学显微镜、电子探针观察和分析了掺钛蓝宝石激光晶体中夹杂物的形状、尺寸大小及元素组成，并提出消除和减少这些夹杂物的方法．     

Corrosion fatigue short crack growth behaviour in a high strength steel

The influence of an aggressive environment (0.6 M, aerated NaCl solution) on short fatigue crack initiation and growth behaviour has been studied. The study involved three major test series, namely: air fatigue, corrosion fatigue, and intermittent air fatigue/corrosion fatigue. The above tests carried out under fully reversed torsional loading conditions at a frequency of 5 Hz, showed that it was the non-metallic inclusions which took part in crack initiation resulting from debonding at metal matrix/inclusion interface and pitting of inclusions in both air and corrosove environments, respectively. Short fatigue crack growth results in these two environments obtained by using plastic replication technique, indicated a large effect of microstructure i.e. prior austenite grain boundaries. The stage/stages at which the environmental contribution was dominant has been discussed by considering the results achieved from intermittent tests. However, the mechanisms involved in corrosion fatigue short crack growth have also been described in the light of results obtained from futher investigations carried out by conducting corrosion fatigue tests under applied cathodic potential conditions and tests on hydrogen pre-charged specimens under air fatigue and uniaxial tension conditions.     

薄膜生长的计算机模拟

薄膜技术在现代科技领域中有着广泛的应用。人们对薄膜的生长过程通过理论和实验进行了深入的研究，其中计算机模拟是重要的方法，本文概述了对薄膜生长过程的实验观察结果及其理论分析，主要讨论了薄膜生长的计算机模拟中经常采用的方法-蒙特卡罗法和分子动力学方法、描述衬底上成膜粒子运动的一些模型以及在计算机模拟中需注意的一些问题，其中主要包括粒子间的相互作用，入射粒子的能量和粒子上的衬底上的扩散运动。     

布里奇曼法生长碲镉汞晶体的缺陷及其展望

简单介绍了布里奇曼法生长碲镉汞晶体的主要缺陷以及缺陷的控制原理，回顾了国内进行磅镉汞晶体生长的布里奇曼法及加速坩埚旋转技术的布里奇曼法（ＡＣＲＴ－Ｂ）研究的情况，并提出了进一步研究的问题。     

布里奇曼法生长碲镉汞晶体的固液界面形态研究

文中综述了布里奇曼法及加速坩埚旋转技术的布里奇曼法生工碲镉汞晶体过程中固液界面形态的研究结果，简单讨论了固液界面形态对组分分布的影响，并将两种技术所得的组分分布结果进行了比较，在分析影响固液界面形态因素的基础上，认为加速坩埚旋转技术是目前改善固液界面形态的有效方法。     

Nucleate Pool Boiling of Pure Liquids and Binary Mixtures：PartI－Analytical Model for Boiling Heat Transfer of Pure Liquids on Smooth Tubes

ＮｕｃｌｅａｔｅＰｏｏｌＢｏｉｌｉｎｇｏｆＰｕｒｅＬｉｑｕｉｄｓａｎｄＢｉｎａｒｙＭｉｘｔｕｒｅｓ：ＰａｒｔＩ－ＡｎａｌｙｔｉｃａｌＭｏｄｅｌｆｏｒＢｏｉｌｉｎｇＨｅａｔＴｒａｎｓｆｅｒｏｆＰｕｒｅＬｉｑｕｉｄｓｏｎＳｍｏｏｔｈＴｕｂｅｓＧｕｏｑｉｎ...     

硼酸铝钕(NAB)晶体光学均匀性的测量

NAB晶体是一种综合性能较好的新型激光工作物质,有希望做成高效的小型固体激光器。本文介绍一种测量这种晶体光学均匀性的方法。 一般都采用在干涉仪上观测干涉图样来判定激光棒的光学均匀性。NAB晶体的吸收光谱曲线显示出其在可见光光谱区内有多个吸收峰。我们注意到:通常用做激光干涉仪光源的He-Ne激光器发射的632.8nm谱线正位于NAB晶体的一个吸收峰,并用输出约为45mW     

几种高强度钢腐蚀疲劳裂纹扩展行为的研究

本文研究了ＧＣ－４，３０ＣｒＭｎＳｉＮｉ２Ａ和３００Ｍ超高强钢的腐蚀疲劳裂纹扩展行为。考虑了环境，热处理制度，应力比和频率对裂纹扩展的影响。研究结果表明：腐蚀环境和热处理制度对疲劳裂纹扩展有显著影响。在侵蚀性环境中随频率降低，裂纹扩展大幅度上升，随应力比提高，环境影响加剧。利用扫描电镜对试样断口形貌进行了分析，并讨论了高强钢的腐蚀疲劳机理。