高速切削机床中的磁轴承

高效化是机械制造的永恒主题之一。本文简介了高速切削的理论依据及其优点，分析了磁悬浮轴承的原理、特点以及磁浮轴承在高速切削机床上的应用情况，从而说明了磁浮轴是高速切削机床最理想的轴承之一。     

滚切剪剪切力的实验研究

对直导向滚切剪的剪切力进行了实验研究，得到了计算最大剪切力的经验公式。     

Ti-23Al-17Nb合金激光切割工艺研究

对一种金属间化合物Ti-23Al-17Nb合金的激光切割性进行了初探。试验结果表明只要工艺参数适当，可获得较好质量的切口。切缝质量可以满足随后激光拼焊的要求。     

On the evaluation of the global heat transfer coefficient in cutting

The use of numerical simulations for investigating machining processes is remarkably increasing because of the simulation cost is lower than the experiments and the possibility to analyze local variables such as pressures, strains, and temperatures is allowable. Process simulation is very hard from a computational point of view, since it frequently requires remeshing phases and very small time steps. As a consequence, the simulated cutting time is usually of the order of few milliseconds and no steady cutting conditions are generally achieved, at least as far as thermal conditions are concerned. Therefore, nowadays numerical prediction of cutting temperatures cannot be considered fully reliable. In the paper this issue was taken into account: a mixed Lagrangian-Eulerian numerical approach was utilized and the global heat transfer (film) coefficient at the tool-chip interface was derived through an inverse approach. Finally, the dependence of the film coefficient on pressure and temperature on the rake face was investigated.     

A critical analysis on the friction modelling in orthogonal machining

Despite the development of high performance finite element-based codes, the simulation of machining still represents a very hard task due to the geometric complexity of the real chip-tool systems and the high cutting speed that requires very long simulation times. For these reasons, many aspects related to machining are not very clear and so easy to simulate. In this paper a rigorous investigation on the role played by the implemented friction model within a 2D simulation of orthogonal cutting was carried out, taking into account different models proposed by the researchers in the last years. The main simulation results were compared with experimental measurements in order to verify if it is possible to identify the best model. Once the comparison with mechanical variables was completed, a subsequent study on temperature predictions utilizing the above friction models was executed as well. The results of this integrated numerical and experimental work are carefully reported in the paper.     

金刚石颗粒在锯切石材过程中磨损形态的研究

本文分析和归纳了锯切花岗石过程中金刚石颗粒的五种磨损形态和三个磨损阶段，探讨了金铡石颗粒磨损形态对金刚石锯片锯切性能的影响。     

Al2O3／TiB2／SiCW陶瓷刀具加工镍基合金时的磨损机理研究

研究了Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ陶瓷刀具加工Ｉｎｃｏｎｅｌ７１８镍基合金时的切削性能和磨损机理。结果表明；在低速切削条件下，Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ和硬质合金刀具的抗后刀面磨损的能力相差不大；而在高速切削条件下，前者的抗后刀面磨能力远高于后者。     

掏槽法在黄麦岭磷矿掘双壁沟爆破中的应用

在黄麦岭磷矿露天开采的掘沟爆破中，根据掏槽法的机理，使用大孔径深孔掏槽，采用多排微差挤压爆破，一次形成开采所需的双壁沟，提高了掘沟效率，扩大了掏槽法的应用范围。     

聚酯线绳窄型联组V带的研制

简述了窄型联组V带的结构及传动特点，介绍了制造该V带时模板设计要点，各部分配方设计原则及制造工艺和有关注意问题。     

软PLC技术在钢丝帘布小角度裁断机上的应用

介绍软PLC技术的原理和在钢丝帘布小角度裁断机上的应用.小角度裁断机上的软PLC系统硬件由工业PC和远程分布式I/O系统组成,采用TwinCAT System软件(由系统说明、系统控制、PLC控制和系统管理器4部分组成),安装在Windows操作系统上.与传统PLC系统相比,软PLC系统方便和简化了小角度裁断机控制系统的设计和施工,减少了设计、安装、测试、维护和维修费用.