掺和改性聚醋酸乙烯溶剂型建筑粘合剂的研究

通过在均聚醋酸乙烯树脂中加入胺类、聚醚类、聚氨醚类和环氧树脂等各种掺和剂进行改性,使其使用时间有不同程度地提高,而粘合强度不下降。     

SO_4~(2-)/ZrO_2超强酸催化合成乙酸异戊酯的研究

在催化剂SO2 -4/ZrO2 存在下 ,研究了乙酸异戊酯的合成反应 ,考察了反应物用量、反应时间、催化剂用量对酯化反应的影响。最佳工艺条件 :催化剂用量 1 5g、醇酸摩尔比为 1∶2 5、反应时间 1 5h ,收率达 73 5 %。     

微波诱导稀土固体超强酸SO4^2-／TiO2／Ce^4＋催化合成乙酸正丁酯

本文探讨了标题合成方法中合成反应条件对酯收率的影响。其最佳反应条件为：n(醇)：n(酸)=2．5：1．0，固体超强酸用量为反应物总质量的2．0％，微波辐射功率528W，辐射时间20min，酯收率达89．5％。用IR等手段对产品进行了确证。     

尼龙66/乙烯-醋酸乙烯酯共聚物接枝马来酸酐共混体系的研究(Ⅰ)乙烯-醋酸乙烯酯共聚物熔融接枝马来酸酐的制备与表征

以马来酸酐为单体、过氧化物为引发剂，采用熔融挤出法制备了乙烯-醋酸乙烯酯共聚物接枝马来酸酐(EVA-g-MAH)。重点讨论了不同型号的EVA、过氧化物引发剂品种及用量、单体MAH用量和加工工艺条件等因素时接枝反应的影响。通过化学滴定法和傅立叶红外光谱法(FTlR)证实部分马来酸酐确实以化学键连接到EVA分子链上。与聚乙烯(PE)、聚丙烯(PP)相比，EVA中由于含有醋酸乙烯(VA)基团，极性较大，与MAH的相客性较好，因而在相同的条件下接枝效率也更大；而且VA含量越大，越有利于接枝反应。比较不同的过氧化物引发剂BPO和DCP。发现DCP的引发效果更好。实验结果还表明，在EVA进行接枝反应的同时存在着交联反应，引发剂DCP的用量不宜过高，为得到接枝率适中，交联度很小的接枝产物，还要选择合适的MAH与DCP的用量。     

聚醋酸乙烯酯乳液改性研究进展

综述了国内外对聚醋酸乙烯酯乳液的改性研究,如耐水性、稳定性等方面的研究进展,并对聚醋酸乙烯酯乳液的发展前景进行展望。     

Heat Induced Structure Modifications in Polymer‐Layered Silicate Nanocomposites

Summary: The success of the use of layered silicates in polymer nanocomposites, to improve physical and chemical properties is strictly related to a deeper knowledge of the mechanistic aspects on which the final features are grounded. This work shows the temperature induced structural rearrangements of nanocomposites based on poly[ethylene‐co‐(vinyl acetate)] (EVA) intercalated‐organomodified clay (at 3–30 wt.‐% silicate addition) which occur in the range between 75 and 350 °C. In situ high temperature X‐ray diffraction (HT‐XRD) studies have been performed under both nitrogen and air to monitor the modifications of the nanocomposite structure at increasing temperatures under inert/oxidative atmosphere. Heating between 75 and 225 °C, under nitrogen or air, causes the layered silicate to migrate towards the nanocomposite surface and to increase its interlayer distance. The degradation of both the clay organomodifier and the VA units of the EVA polymer seems to play a key role in driving the evolution of the silicate phase in the low temperature range. The structural modifications of the nanocomposites in the high temperature range (250–350 °C), depended on the atmosphere, either inert or oxidizing, in which the samples were heated. Heating under nitrogen led to deintercalation and thus a decrease of the silicate interlayer space, whereas exfoliation was the main process under air leading to an increase of the silicate interlayer space.

Heat induced structural modification of EVA‐clay nanocomposite under nitrogen and air.     

醇醚羧酸盐在日化产品中的应用性能研究

考察了脂肪醇聚氧乙烯醚乙酸钠(AE9C Na)的生物降解性和酸、碱水解稳定性,研究了AE9C Na在洗衣粉、肥皂及香波中的应用性能。结果表明,AE9C Na易生物降解,在整个pH值范围内具有良好的酸、碱水解稳定性;在普通肥皂中添加AE9C Na作钙皂分散剂,大大提高了其去污力、抗硬水性,在冷水中的溶解性及织物洗后纤维表面的光滑柔软性;与洗衣粉各助剂及常用各类型表面活性剂配伍性能良好,特别在高硬度水中显示出强大的去污力和钙皂分散能力;在香波中表现出强的起泡、稳泡能力和良好的增调作用。     

Alarm pheromone system of leaf-footed bugLeptoglossus zonatus (Heteroptera: Coreidae)

The alarm pheromone system ofLeptoglossus zonatus (Dallas) adults was shown to be composed of hexyl acetate, hexanol, hexanal, and hexanoic acid. Single components tested in the field elicited dispersive behavior of over 70% of adults. 2-(E)-Hexenal, found in the secretion of nymphs, but not in the exudates of adults, was also active against adults. In addition, first-instar nymphs responded to the four components of the alarm pheromone of adults as well as to 2-(E)-hexenal, a component of their own alarm pheromone system. Adults and nymphs possess different alarm pheromone systems, which are not specific to their own life stage. That hemipteran alarm pheromone systems are not species-specific was supported by the fact that both adult and nymphL. zonatus responded to butanoic acid, an alarm pheromone of Alydidae, which was not found in this Coreidae species.     

Viscoelastic properties of cellulose derivatives: 1. Cellulose acetate

The dynamic mechanical spectrum of cellulose acetate (CA) from −130°C to 240°C has been determined at different frequencies (from 0.1 to 30 Hz). Three relaxations, designated , β and γ in order of decreasing temperature, and one shoulder (β*) above room temperature were found. Comparison with calorimetric and thermogravimetric measurements yields the conclusion that the relaxation (197°C at 3 Hz) is related to the glass-to-rubber transition and the β* shoulder (50°C–100°C) is due to loss of moisture. The β relaxation (−38°C at 3 Hz, ΔH = 100 kJ mol⁻¹) is tentatively assigned to local motions of the main chain (glucopyranose rings). The low-temperature γ relaxation (−88°C at 3 Hz, ΔH = 46 kJ mol⁻¹), is humidity-dependent: its intensity decreases when the samples are dried to moisture contents lower than that obtained by normal room conditioning (about 3%). Higher water contents shift the relaxation to lower temperatures without increasing the intensity of the mechanical loss. It is suggested that water associated with the unesterified methylol groups of cellulose acetate is responsible of the dynamic mechanical γ dispersion.     

Methyl tert-butyl ether decomposition over heteropoly acid catalyst in a cellulose acetate membrane reactor

In this study the methyl tert-butyl ether (MTBE) decomposition over H₃PW₁₂O₄₀ was carried out in a cellulose acetate membrane reactor. The permeability of methanol through the cellulose acetate membrane was about 30 and 300 times higher than that of either isobutene or MTBE, respectively. The isobutene selectivity in the fixed bed reactor was only slightly higher than the methanol selectivity due to the side reaction. In the cellulose acetate membrane reactor, however, the isobutene selectivity in the rejected stream was 68% and the methanol selectivity in the permeated stream was up to 97%. The MTBE conversion in the membrane reactor was about 7% higher than that in the membrane-free fixed bed reactor under the same reaction conditions. The enhanced performance of the membrane reactor in this reversible reaction was mainly due to the selective permeation of methanol which resulted in a methanol-deficient condition suppressing MTBE synthesis reaction.