Structure of rapidly solidified aluminum alloys

This paper is a summary of an extensive research program carried out by the authors on the structure of rapidly solidified aluminum alloys; and a comparison with the work of others also involved in this field. The paper discusses the changes in the dendritic and non-dendritic structure of the matrix at cooling rates from 10^–3 to 10¹⁰ K/s and discusses the hetergeneity of the structure caused by interdendritic-segretion during solidification.     

Synthesis and aqueous solution behaviors of sodium sulfonate‐terminated dendritic poly(ester‐amine)

Sodium sulfonate‐terminated dendritic poly(ester‐amine) (SPEA) was synthesized by sulfonation of acrylic double bond‐terminated dendritic poly(ester‐amine) (APEA) with sodium hydrogen sulfite (NaHSO₃) in mixture of diglycol and 2‐butanone under normal pressure. The structure of SPEA was characterized by IR, ¹H‐NMR, and elemental analysis. SPEA was water‐soluble. 1.0–40.0% (mass) SPEA aqueous solutions appeared as dilatant fluid. When pH value varied from 1.5 to 12.0, the viscosity of 1–5% (mass) SPEA aqueous solutions changed very small, and the electric conductivity almost kept stable within pH 3.0–10.0. The relationship between the viscosity and the concentration of SPEA water solutions was similar to that of NaCl water solutions. The surface tension of SPEA water solutions was lower than that of polyethylene glycol 2000 water solutions with the same concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

树突细胞算法在线分析组件的研究

原始树突状细胞算法（DCA）的离线分析过程,将会导致时间差异,从而产生假警报,增加了虚警率,也会导致攻击的成功发生,这对一个人侵检测系统来说是致命的。因此,文中的目的就是在不影响检测精度的前提下提高检测速度。于是文中提出了分片思想的在线分析组件与DCA相集成的方法,即根据抗原采样数量或者时间将一系列已处理的信息分割成为更小的部分,使得每个分片独立地进行实时的、周期性的分析,这样在每个分片内的入侵攻击就能及时地被识别出来。文中给出了DCA在线分析模块的伪代码描述,并且将其应用于SYN端口扫描的检测实验中。结果表明,DCA在线分析模块在不影响检测精度的前提下有效地提高了检测速度。     

某矿区变电站进线段防雷改造措施及仿真分析

介绍了某矿区110kV变电站线路防雷措施的基本情况,分析了该变电站35kV进线段遭受雷击的原因,即线路绝缘水平遭人为提高后与站内绝缘水平等级不匹配和进线段杆塔接地电阻过高,并提出了相应的采用加装绝缘子保护间隙配合避雷器进行差异性保护和采用树枝状接地装置的改造措施。ATPEMTP仿真分析结果验证了改造措施的可行性。     

元胞自动机方法在枝晶生长模拟中的应用

尽管大量关于枝晶生长模拟的研究都使用了相场方法,但近年来元胞自动机(CA)方法在枝晶生长模拟方面也取得了很大进展.介绍了CA方法模拟枝晶生长的原理和模型,评述了CA方法在枝晶模拟方面的发展历程,指出了存在的问题的和进一步研究的方向.     

镍基单晶合金枝晶典型区域相成分最优化测算法

建立了用于测算镍基单晶高温合金枝晶典型区域相成分的最优化数学模型.根据电子探针对枝晶典型区域成分的测定结果,运用BFGS拟Newton法及CONSTR约束优化算法,可以计算枝晶各典型区域中γ和γ＇相成分.以镍基单晶合金CMSX-2和CMSX-4为对象,对优化测算结果进行了分析,证实了该方法的可行性.     

热型连铸Al-1%Si线材的研究

在自制的水平热型连铸设备上，采用一定的工艺参数，制备出了表面呈镜面，内部组织沿轴向定向排列的柱状晶Al-1％Si线材，其与金属型生产的多晶线材相比，屈服强度提高40％，伸长率提高35．3％，导电率提高了17．3％。     

Composite corrosion inhibitors for secondary alkaline zinc anodes

The corrosion inhibition property of PEG600 and In(OH)3 as composite corrosion inhibitors for secondary alkaline zinc electrodes was studied, and the inhibition efficiency was determined as 81.9%. The research focused on the mechanism by the methods of electrochemical impedance spectroscopy, polarization curves and IR spectroscopy. The results indicate that the corrosion inhibition effectiveness is attributed to the joint inhibition of anodic zinc dissolution and cathodic hydrogen evolution. And the anodic process is depressed to a greater extent than the cathodic process. The synergistic mechanism of the composite inhinbitors proves to be the enhancement of adsorption of PEG600 by In(OH)3. Potentiostatic experiment results and SEM images verify the inhibition of dendritic growth by the composite inhibitors.     

变速生长条件下Al－Cu合金的定向凝固枝晶组织

应用改进的定向凝固装置研究了Ａｌ－２ｗｔ－％Ｃｕ和Ａｌ－４ｗｔ－％Ｃｕ合金在阶跃和不同加速度线性变速生长条件下，定向凝固组织的动态转变。实验结果表明：尽管定向生长的胞－枝晶动态转变过程随加速度的降低而减缓，但胞晶组织都是在经历了一定的胞晶形貌扰动之后才发生快速失稳、分枝细化并向树枝晶组织过渡，加速度不同，由失稳胞晶演变成的树枝晶可具有多种分枝形式。     

Biomimetic Aerogel for Moisture-Induced Energy Harvesting and Self-Powered Electronic Skin

Moisture–electric generator (MEG)-based blue energy is widely studied. There is still a significant challenge in improving the power of the MEGs system and expanding its application in self-powered electronic skin. Inspired by the structure of ferns, a biomimetic moisture–electric aerogel is designed to collect energy. Polyvinyl alcohol dendritic colloids act as “roots” and “stems” to provide support and channels to transport water molecules. Meanwhile, “leaf-like” graphene oxide sheets generate electricity through direct interaction with water. Besides, based on the above biomimetic structure, this work further enhances the output performance of MEGs by increasing the specific surface area (120.4 m² g⁻¹) and introducing an ultra-high ion density gradient (from −35 to +37 mV). Meanwhile, due to the excellent water absorption, the MEGs show good salt resistance and cyclic stability. By constructing unique biomimetic structures, ultra-high ion density gradient, and regulating environmental conditions, a high-performance MEG is obtained, including ultra-high open-circuit voltage (1.9 V) and short-circuit current (82.5 µA), the industry-leading power density among MEGs with continuous output is reported in the literature (22.55 µW cm⁻²). Besides, the MEGs can accurately respond to environmental and pressure changes, showing its application potential in self-powered electronic skin.