Manufacturing method for monolithic dye-sensitised solar cells permitting long-term stable low-power modules

A manufacturing technique for monolithic dye-sensitised solar cells is presented. Encapsulated modules designed for indoor low-power applications have been prepared using industrial methods and equipment. Under certain conditions (light intensity <5000 lx, temperature between –10°C and 50°C, and relative humidity of appr. 50%), the modules have performed well and shown excellent long-term stability. Moreover, modules withstand illumination in combination with storage at 100% relative humidity. However, a certain degradation of the module performance takes place at illuminations exceeding 5000 lx and temperatures exceeding 50°C.     

汽车代用燃料的应用和发展

评述了汽车代用燃料的现状和未来，压缩天然气和液化石油气将率先大量使用，其次是醇燃料，合成燃料和二甲醚将主要用于某些混合动力车，燃料电池因为能源效率高是最有吸引力的车用能源，将于2010-2015年开始在汽车上实际使用，我国石油工业在提升汽油和柴油质量的同时，应与汽车工业联手开发代用燃料，特别要注意发展燃料电池技术。     

“四低一高”工艺在85kA预焙槽的应用与优化

本文介绍了“四低一高”(低电解温度、低分子比、低氧化铝浓度、低阳极效应系数、高工作电压)工艺技术条件在85kA预焙槽上的应用与优化,实验证明“四低一高”工艺需要针对具体槽型进行优化设计,适宜的技术条件对提高电流效率、降低直流电耗,节能效果显著。     

冠心病患者循环血中内皮细胞、内皮素和6－酮－前列环素F_（1a）的动态变化及意义

以循环内皮细胞（ＣＥＣ）作为血管内皮细胞（ＶＥＣ）损伤的指示物，以血浆内皮素（ＥＴ）和前列环素（ＰＧＩ２）反映ＶＥＣ的功能变化，对８５例冠心病患者与３０例正常人进行对比研究，并对５０例不稳定型心绞痛及２０例急性心肌梗塞进行了动态观察．结果表明：冠心病外周血中ＣＥＣ、ＥＴ明显升高（Ｐ＜０．００１），ＰＧＩ２明显下降（Ｐ＜０．００１），尤以不稳定型心绞痛和急性心肌梗塞更显著，与病情的严重程度相一致．提示冠心病ＶＥＣ损伤，以及它所分泌的内皮源性舒缩因子失平衡参与了冠心病的病理过程。     

ATM网络的可用比特率业务

本文介绍了可用比特率业务的业务特点，速率控制机制以及该业务存在的问题。     

Sensitizing Mechanism and Adsorption Properties of Dye—Sensitized TiO2 Thin Films

The dye-sensitized TiO2 complex films were prepared by the dye coat onto TiO2 surfaces,and the sensitizing mechanism and adsorption properties of the dye-sensitized TiO2 complex films were inverstigated.The influence of the application conditions of dye adsorbed on TiO2 films on the amount of dye adsorption was discussed.Experimental results show that the concentration,the temperature of dye solutions and the dipping time of TiO2 films in the dye solutions have a significant influence on the amount of dye adsorption.Cell test indicates that the conversion efficiency of light to electricity increases with the amount of dye adsorption.     

河口水流、波浪、潮流、泥沙、河床变形二维数学模型

根据河口“波浪掀沙，潮流输沙”的泥沙运动机制，引入“波浪幅射应力”反应波浪对水体和泥沙的驱动力．考虑波浪对底部泥沙作用力、波浪对水流挟沙能力的影响及风场对水流和泥沙运动的影响．同时考虑泥沙粒径大小、水体含盐度、含沙量及水流紊动程度等因素对絮凝沉速的影响．用ＡＤＩ算法求解沿水深平均方程，破开算子法解悬移质不平衡输沙方程及河床变形方程，引入通度概念处理岸滩不规则边界，建立河口水流、波浪、潮流、泥沙、河床变形二维数学模型．通过实测资料及卫星摇感图像对所建数学模型进行检验，表明它可以较好地预测河口泥沙的运动     

Numerical study on PEMFC’s geometrical parameters under different humidifying conditions

Steady-state and three-dimensional simulations were carried out to study the influences of geometrical parameters on the performance of PEMFC under different hydrating conditions. Flow fields, species transport, transport of water in polymer membrane and movement of liquid water in cathode and anode porous layers were determined, in order to accomplish a complete estimation of ohmic and concentration losses of PEMFC power. The geometrical parameters were thickness of the polymer membrane, cathode catalyst layer as well as gas channel to rib width ratio. Every simulation was made under different relative humidities of inlet flows (50 and 100%) for every change of characteristic length. Results show that the influence of the geometrical parameters on ohmic and concentration losses is of considerable importance. The performance of PEMFC is seriously affected under dehydrating conditions. However, such performance may be considerably improved by using suitable geometrical parameters. Cathode and anode liquid saturation may not only affect the transport of species, but also the polymer electrolyte water content. These results show the importance of simultaneously calculating both the water absorption and desorption through the polymer electrolyte and the liquid saturation in the cathode and anode porous mediums to obtain an actual view of ohmic and concentration losses of the PEMFC performance.     

铝电解槽料箱排气管结构的优化改造

简要介绍了铝电解槽料箱排气管在原设计上存在的缺陷和不足，针对缺陷产生的原因进行了结构优化改造。