A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Macrophage Membrane-Coated Nanoparticles Sensitize Glioblastoma to Radiation by Suppressing Proneural–Mesenchymal Transformation in Glioma Stem Cells

Radiotherapy is identified as a crucial treatment for patients with glioblastoma, but recurrence is inevitable. The efficacy of radiotherapy is severely hampered partially due to the tumor evolution. Growing evidence suggests that proneural glioma stem cells can acquire mesenchymal features coupled with increased radioresistance. Thus, a better understanding of mechanisms underlying tumor subclonal evolution may develop new strategies. Herein, data highlighting a positive correlation between the accumulation of macrophage in the glioblastoma microenvironment after irradiation and mesenchymal transdifferentiation in glioblastoma are presented. Mechanistically, elevated production of inflammatory cytokines released by macrophages promotes mesenchymal transition in an NF-κB-dependent manner. Hence, rationally designed macrophage membrane-coated porous mesoporous silica nanoparticles (MMNs) in which therapeutic anti-NF-κB peptides are loaded for enhancing radiotherapy of glioblastoma are constructed. The combination of MMNs and fractionated irradiation results in the blockage of tumor evolution and therapy resistance in glioblastoma-bearing mice. Intriguingly, the macrophage invasion across the blood-brain barrier is inhibited competitively by MMNs, suggesting that these nanoparticles can fundamentally halt the evolution of radioresistant clones. Taken together, the biomimetic MMNs represent a promising strategy that prevents mesenchymal transition and improves therapeutic response to irradiation as well as overall survival in patients with glioblastoma.     

合成介质对PEDOT催化染料敏化太阳电池光阴极性能的影响

采用聚3,4-乙烯二氧噻吩(PEDOT)/FTO为对电极,研究了合成介质对循环伏安法电聚合制备的PEDOT/FTO对电极性能的影响。通过SEM、CV、EIS、Tafel曲线,并首次采用SECM方法对所制备的对电极的电催化性能进行了表征。结果表明:在LiClO4水溶液和1-丁基-3-甲基四氟硼酸盐离子液体(IL)中制备的光阴极具有良好的电催化性能。J-V测试曲线表明,在LiClO4水溶液和IL中制备的光阴极所组装的DSSC器件的光电转化效率分别达6.4%和6.6%,接近于同等条件下以Pt对电极构建的DSSC器件的光电转化效率。     

A Two‐Stage Annealing Strategy for Crystallization Control of CH3NH3PbI3 Films toward Highly Reproducible Perovskite Solar Cells

The solvent‐engineering method is widely used to fabricate top‐performing perovskite solar cells, which, however, usually exhibit inferior reproducibility. Herein, a two‐stage annealing (TSA) strategy is demonstrated for processing of perovskite films, namely, annealing the intermediate phase at 60 °C for the first stage then at 100 °C for the second stage. Compared to conventional direct annealing temperature (DHA) at 100 °C, using this strategy, MAPbI₃ films become more controllable, leading to superior film uniformity and device reproducibility with the champion device efficiency reaching 19.8%. More specifically, the coefficient of variation of efficiency for 49 cells is reduced to 5.9%, compared to 9.8% for that using DHA. The TSA process is carefully studied using Fourier transform infrared spectroscopy, X‐ray diffraction, and UV–vis absorption spectroscopy. It is found that in comparison with DHA the formation of hydrogen bonding and crystallization of perovskite are much slower and can be better controlled when using TSA. The improvements in film uniformity and device reproducibility are attributed to: 1) controllable MAPbI₃ crystal growth stemming from the progressive formation of hydrogen bonding between methylammonium and halide; 2) suppression of intermediate phase film dewetting, which is believed to be due to its decreased mobility at the initial low‐temperature annealing stage.     

Regulation of Polymer Configurations Enables Green Solvent-Processed Large-Area Binary All-Polymer Solar Cells With Breakthrough Performance and High Efficiency Stretchability Factor

With the great potential of the all-polymer solar cells for large-area wearable devices, both large-area device efficiency and mechanical flexibility are very critical but attract limited attention. In this work, from the perspective of the polymer configurations, two types of terpolymer acceptors PYTX-A and PYTX-B (X = Cl or H) are developed. The configuration difference caused by the replacement of non-conjugated units results in distinct photovoltaic performance and mechanical flexibility. Benefiting from a good match between the intrinsically slow film-forming of the active materials and the technically slow film-forming of the blade-coating process, the toluene-processed large-area (1.21 cm²) binary device achieves a record efficiency of 14.70%. More importantly, a new parameter of efficiency stretchability factor (ESF) is proposed for the first time to comprehensively evaluate the overall device performance. PM6:PYTCl-A and PM6:PYTCl-B yield significantly higher ESF than PM6:PY-IT. Further blending with non-conjugated polymer donor PM6-A, the best ESF of 3.12% is achieved for PM6-A:PYTCl-A, which is among the highest comprehensive performances.     

Morphometric and some immunohistochemical characteristics of human choroids plexus stroma and psammoma bodies

Psammoma bodies (PBs) are one of many choroids plexus aging changes. The aim of our research was to perform the quantification of PBs' presence in human choroids plexus stroma, as well as to evaluate the characteristics of choroids plexus stroma in cases in which PBs were present. Afterwards, the observations of the histochemical analysis would be confirmed by immunohistochemical analysis. Choroid plexuses of 30 cadavers were used for the histochemical and, choroids plexuses of 15 cadavers in which PBs' presence was confirmed during the histochemical analysis, were used as material for the immunohistochemical analysis. Light microscopy, histochemical, immunohistochemical, and morphometric method were applied during the study. Classification of the cases was performed by cluster analysis. We observed increase of choroids plexus PBs' presence during the aging process. But this increase is not linear. Their presence is the largest in the second cluster that is younger than the third and older than the first. Nuclear morphometric parameters of the stroma in these cases showed that the cellular composition in this cluster is different than in other two and, that contain larger number of lymphoid cells. Immunohistochemical analysis showed PBs' positive reaction on vimentin, CD45R0, and LCA markers, while in their vicinity, as well as inside them, numerous T-cells were observed. So, the presence of CD45R0 and LCA-positive T cells, PBs' positive reaction on the same markers, indirectly connect these cells with PBs' formation process.     

Some prospective applications of silicon electrodeposition from molten fluorides to solar cell fabrication

Electrodeposition of both epitaxial and polycrystalline continuous films of dense, coherent, and well-adherent silicon coatings was achieved from molten fluorides. A dissolving Si anode and an operating temperature of about 750 C were utilized. Silicon electrocrystallization epitaxy (ECE) produced films with the (111) orientation on Si substrates of the same orientation. The unintentionally doped films were of p-type character with a resistivity in the range 0.05 - 0.10 Ω-cm. Polycrystalline Si films were similarly electroplated onto various polycrystalline metal substrates. Uniform coherent, and well-adherent coatings with grain diameters as large as 40 – 50 μm were obtained. The useful rate of electrodeposition of Si could be significantly increased by the application of an alternating square wave pulse (ASWP)₂technique. Cathodic current pulses as high as 300 mA/cm² (growth rate of about 5 μm/min) were demonstrated. The cathodic current efficiencies, for all modes of growth, were about 70 – 100%. The effects of the various operating parameters, and some prospective applications to the fabrication of solar cells, are discussed. This was paper A-6 in the 18th Annual Electronic Materials Conference, Salt Lake City, June 23–25, 1976.     

MRT letter: Human bloodstains on antique aboriginal weapons: a guiding low-vacuum SEM study of erythrocytes in experimental samples on ethnographically documented biological raw materials

The aboriginal use of reed and bone as raw materials for knives and daggers, respectively, has been well-documented ethnographically in some geographical areas of Melanesia. Because of the significant role that these weapons played in inter- and intra-ethnic aggression, they can potentially have retained smears from the contact with human blood. To carry out a guiding low-vacuum scanning electron microscopy (SEM) study of specific interest to ethnography, the outsides of a fragment of stalk of giant cane (Arundo donax) and tibial diaphysis of domestic sheep (Ovis aries) were smeared with peripheral human blood. No biological specimen preparation was applied to the samples. After just over 1 month, bloodstain boundaries and their neighboring inner areas were examined via secondary electrons by a variable-pressure SEM (VP-SEM) working in low-vacuum mode. On both substrates, bloodstains exhibited micro-scales. No janocyte (erythrocyte negative replica) was observed in the examined areas. However, erythrocytes were seen crowded together as grain-shaped corpuscles in the smear on reed, and several hecatocytes (moon-like shaped erythrocytes) were evidenced in the smear on bone. The results of this study suggest that a VP-SEM working in low-vacuum mode can be used fruitfully to detect blood remains in medium-sized reed and bone antique aboriginal artifacts. This procedure can prospectively help to ethnographic museum curators and aboriginal-art surveyors as an easy guiding test in the valuation of antique traditional weapons prior to acquisition, when the real use of a piece has been claimed by the supplier.     

Dynamics of polymer electrolyte fuel cells undergoing load changes

Numerical simulations are carried out for a single-channel polymer electrolyte fuel cell (PEFC) undergoing a step increase in current density. The objective is to elucidate profound interactions between the cell voltage response and water transport dynamics occurring in a low-humidity PEFC where the membrane hydration and hence resistance hinges upon the product water. Detailed results are presented to show that a step increase in the current density leads to anode dryout due to electroosmotic drag, while it takes several seconds for water back-diffusion and anode humidified gas to re-wet the anode side of the polymer membrane. The water redistribution process is controlled by water production, membrane hydration, electroosmotic drag, and water diffusion in the membrane. The anode dryout results in a substantial drop in cell voltage and hence temporary power loss. Under extreme situations such as dry anode feed, large step increase in the current density, and/or lower temperatures, the cell voltage may even reverse, resulting in not only power loss but also cell degradation. Finally, the dynamics of current distribution after a step change in gas humidification is numerically examined.