模拟乘法器的简易分析方法

提出了一种模拟乘法器工作原理的简易分析方法，与通用的一般方法相比，这种方法避开了较复杂的数学推导，采用大学熟悉的公式从而使分析过程简便易懂。     

MV2000T智能变送器

较全面地介绍了ABB公司MV2 0 0 0T智能变送器的市场开发背景、工作原理、技术规格、性能特点及设计选型要点     

Melting and crystallization behaviour of elastoplastic semicrystalline copolymers: poly(ether ester)

The melting and crystallization behaviour of an elastoplastic semi-crystalline poly(etherester) has been studied by differential scanning calorimetry. The shape of the melting endotherm is strongly dependent on heating rate and annealing time and results from the sum of simultaneous melting and crystallization phenomena. Samples prepared by different techniques, i.e. by solvent evaporation or by melt extrusion, behave very differently owing to specific crystal morphologies. By applying the Hoffman-Weeks plot, the equilibrium melting temperature has been extrapolated. The Avrami treatment allows the calculation of the index n and of the rate constant K from the isothermal kinetic data.     

差热法测定钢样表面氧与体内氧的方法研究

本文利用美国LECO公司生产的TC-436氧氮仪,研究了光谱纯Fe2O3,Al2O3和在大量脱氧铁存在下Al2O3的氧释放曲线,得到了它们的分解功率、分解电流和分解计算温度.成功地分离了钢样的表面氧和体内氧,并对钢样不同表面氧的组成做了初步研究.     

CVD金刚石膜生长过程的Raman分析

采用激光Raman散射分析法对CVD金刚石膜的生长过程进行研究 ,讨论在金刚石膜生长的不同阶段 ,膜内金刚石和非金刚石成分的相对含量及其残余应力的变化情况     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.     

宽带抽运情况下乙醇、丙酮溶液中受激拉曼散射光谱的实验研究

研究了乙醇、丙酮两种拉曼介质在宽带抽运情况下啁啾激光脉冲的受激拉曼散射频谱特性 ,得到的一级Stokes光频谱宽度与抽运光基本相当 ,且具有较高的转换效率 ,从而表明了利用“展宽—受激拉曼散射—压缩”的办法获得波长近 1μm的飞秒级超短脉冲激光信号源的实验方案具有可行性     

用于测量空间温度场的分布式光纤传感器的系统设计

文中首先介绍了喇曼散射，并对分布式光纤温度传感器进行了理论分析，最后着重介绍我们研制的一种能够实际使用的喇曼散射分布式光纤温度传感器系统的设计和应用。     

Development of a Sensor Fusion Strategy for Robotic Application Based on Geometric Optimization

Fusion of multi-sensor information is an important technology, which is growing exponentially due to its tremendous application potential in many areas. Effective fusion of data from sensors is very critical in increasing an intelligent system's capability to accomplish complex tasks. Appropriate fusion technologies are needed to be developed specially when a system requires redundant sensors to be used. More the redundancy in sensors, more is the computational complexity for controlling the system and more is its intelligence level. This research presents a strategy developed for multiple sensor fusion, based on geometric optimization. Each sensor's uncertainty has been modeled using classical Lagrangian optimization techniques. However, the uniqueness and effectiveness of the present technique lies on the fact that starting from the optimized value as initial estimate the accuracy of the sensory information has further been improved up to any pre defined bounded range, by developing two architectures – FFA (fission–fusion architecture) and FDD (fusion in differential domain). Sufficient evidences and analyses have been provided in the paper to show its effectiveness in various applications.     

动态光散射法研究海藻酸钠凝胶松弛行为

在前文的基础上，用相关函数轮廓分析的方法剖析了运动模型模式的复杂性。通过海藻酸钠水溶液在０．１ｍｏｌ／ＬＣａＣｌ２水溶液透析凝胶化过程中交联网络的松弛时间谱表明它不是单一的峰，有两上特征运动模式，并随透析向更慢的运动模式发展，这很慢的运动模式估计与区域的结构的生成有关。