约束放电激励千瓦级基模CO2激光器

本文研究了约束放电激励千瓦级基模CO2激光器。约束放电激励的思想核心是:利用正交或基本正交的电场或者电磁场在阴极位降区附近形成对带电粒子的捕集阱,由此产生对放电过程中从阴极发出的带电粒子的约束作用从而影响整个气体放电激励过程。     

Flow dynamics or ‘quaking’ in gravity discharge from silos

This paper reviews the characteristics of pulsating or cyclic flow of bulk solids during gravity discharge in bins and silos. The dynamic load phenomenon is often referred to as “silo quaking” and is influenced by various factors related to the type of flow pattern developed in the bin and the flow properties of the bulk material. Of particular relevance is the influence of ‘slip-stick’ during shear flow, and the velocity at critical sections in the silo during discharge. An overview of recent and current research on this subject is presented.     

High-field magnetic and transport critical current density of Sm-Ba-Cu-O: Agx superconductors at low temperature

Variation of magnetic critical current density (J _mc) and transport critical current density (J _tc) in high magnetic fields at liquid helium temperature were investigated on Sm-Ba-Cu-O: Ag _x (x=0.0, 0.2, 0.4, and 0.6) superconducting samples prepared by the coprecipitation technique.T _c and crystallographic parameters remain unaffected by Ag addition. However, bothJ _mc andJ _tc were found to increase on Ag addition. The volume pinning force (F _p) also increased with increase in Ag concentration, resulting in stronger flux line sheer. Microwave-induced d.c. voltage measurement shows a significant reduction of the total number of weak links between the superconducting grains with increasing concentration of Ag, which creates stronger pinning potentials between the boundary of the superconducting intergrains. Hence, the volume pinning force is greatly enhanced by Ag addition, leading to flux line lattice movement which is responsible for highJ _mc andJ _tc.     

本征吸除硅片特性研究

本文描述硅本征吸杂片的特性参数,如吸除区宽度、洁净度,氧沉淀密度、MOS电容寿命,介绍了表面态密度及残余间隙氧浓度的检测方法和工艺对参数的影响及参数之间的内在联系,文章还实验论证了不同参数水平对器件成品率的影响,建立了以MOS电容寿命为主导的参数控制方法,利用本文提供的控制参数,可使CCD-512器件成品率达60％,以上优品率≥85％。     

电力变压器局放超声传感器及其应用

作者研制成一种带光纤的电力变压器局放超声PZT传感器.文中分析了它的灵敏度与宽频带特性,介绍了原理、结构设计、实验数据及现场成功实例.理论与实验研究表明:具有这种高灵敏传感器的超声定位系统是确定电力变压器绝缘故障部位的一种方法.     

变速铣削的试验研究

通过试验考证了变速铣削的减振效果和机床电机电流的波动幅度，试验结果表明，变速铣削同样具有明显的减振效果。机床电机电流虽有波动，但波动幅度不大，不会影响电机的正常使用，变速铣削具有良好的应用前景。     

定电流对LED的重要性

高功率超高亮度LED已经开始大量应用.要实际体现LED(尤其是高功率超高亮度LED)的优点,采用定电流驱动方式必要条件之一.     

软起动器在烧结机混料系统中的应用

软起动器以微处理器为核心，能够产生平滑的电压起动曲线，可任意设置稳定的起动电流，并具有多种保护。张钢24m^2烧结机混料系统应用软起动器后，交流电机起动平滑、无噪声，年节电5．6万kW．h，经济效益约2．4万元。     

直流励磁机电刷打火的常见原因及对策

主要介绍了中铝公司山西分公司自备热电厂6台发电机组的励磁机电刷打火的常见原因的分析和处理方法。     

浅谈我国旋转防喷器技术的现状与发展

介绍了我国旋转防喷器技术的发展现状，分析了几种不同类型旋转防喷器的结构特点，指出旋转防喷器的发展方向及其与国外同类技术之间的差距。