A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

基于微机的X射线分析自动测量系统

本文介绍了一个基于微机的X射线分析自动测量系统。该系统有三个基本功能:自动获取数据、自动换样和处理谱数据。     

广义Foster定理

利用Ｍａｘｗｅｌｌ方程组导出了适用于有耗网络的广义Ｆｏｓｔｅｒ定理，得到了一些有关电抗斜率以及Ｑ值的有用公式及结论。     

制备低硫可膨胀石墨的研究

研究了以过二硫酸铵作氧化剂低硫可膨胀石墨的制备，找到了在较低温度下，制备低硫可膨胀石墨的最佳条件。即过二硫酸铵和石墨的重量比为１５％；反应温度为５５℃；反应时间为４０ｍｉｎ；硫酸浓度为９８％；硫酸与石墨的重量比为４∶１，草酸和硝酸（浓度为６５％）的重量比为７．５％时，所制得的可膨胀石墨含硫量为０．６５％，膨胀容积为２００ｍＬ／ｇ可膨胀石墨。并且，其终端产品柔性石墨具有优良的力学性能和抗氧化性能。     

一个高电阻值测量电路

介绍一种新的高阻测试方法，可满足对高达１×１０＾１６Ω的测试要求。测试结果显示，对于１×１０＾１３Ω重复误差优于±２％。高阻测试电路通过接口与６８０９微机配套使用，操作简便，读数直观，便于长时间重复测量。     

对梁,底组合步进式加热炉半热滑轨的改进实践

介绍了间断式半热滑轨的研制和应用过程，以及经过节能技术改造，用新型半热滑轨代替老式滑轨的使用。实践表明，不但解决了以往的水梁漏水的问题，而且使线Ｃ级品率提高了３．３９％，每年可增产３５００ｔ线材，吨钢热涌单耗降低０．１４ＧＪ，年创经济效益２３９万元。     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

Effects of computers on Japanese schools

In this paper I consider how the computer can or should be accepted in Japanese schools. The concept of teaching in Japan stresses learning from a long-term perspective. Whereas in the instructional technology, on which the CAI or the Tutoring System depends, step-by-step attainments in relatively short time are emphasized. The former is reluctant in using the computer, but both share the Platonic perspective which are goal-oriented. However, The Socratic teacher, who intends to activate students' innate disposition to be better, would find another way of teaching and use of the computer.     

Electronic locking devices based on microcontrollers and chaotic maps using Model-Matching Control

In this work a real-time communication system using Arduino® microcontrollers, applied to electronic locking devices, is implemented. Model-Matching Control is used to achieve synchronization between transmitter and receiver Arduino® microcontrollers using only one transmission channel. Model-Matching Control is fed with dynamics from both Arduinos. Transmitter Arduino® is used also to generate in real-time an encrypted chaotic code key based on the Chen map. Receiver Arduino® recover in real-time the chaotic code key that is a binary signal key of an electronic locking device and where wireless communication is made between the two Arduinos using Bluetooth modules. System evaluation in terms of performance, randomness, and time complexity, are shown, as well as experimental results and some discussions are presented.