动态模糊神经网络在大坝变形预报中的应用

针对静态模糊神经网络的局限性,提出了在线动态建模的模糊神经网络方法.当新增样本进入训练集之后,根据新样本对模型的贡献大小,在已有模型的基础上进行动态修正,这样可以减少建模的计算时间.新方法实现了增加样本而矩阵阶数不增加,避免了矩阵求逆运算,理论上可以提高计算效率.实例表明动态模糊神经网络方法是可行的,可实现持久预报,具有较强的适应能力和较高的预报精度,可应用于在线实时变形预报及相关领域.     

石油钻机提升系统穿绳方法研究

目前国内外钻机大绳一般采用顺穿法或花穿法。分析了2种穿绳方法的受力特点,大绳顺穿时游车的受力不平衡,会发生倾斜和摆动;采用大绳花穿方法,避免了游车的倾斜和摆动,但造成大绳入轮槽的倾角大,大绳易脱槽。顺穿法一般在电动钻机上采用,主要考虑到电控操作提升系统比较平稳;花穿法一般在机械钻机上使用,以受力平衡来缓解气控操作带来的冲击载荷的影响。为了克服这2种穿绳方法的不足,提出了两行双联滑轮组顺穿法和双联滑轮组顺穿法,可以提高安全性,减少磨损。     

A Review of Dynamic Fracture Studies in Functionally Graded Materials

Abstract:  This article presents a review of dynamic fracture studies on functionally graded materials. A brief literature review on the fracture mechanics of graded materials is presented first. This is followed by a discussion on the higher-order asymptotic analysis of the transient elastic field surrounding the tip of a dynamically growing crack in a functionally graded material. A comprehensive experimental study of dynamic crack growth in model functionally graded material using the optical method of reflection photoelasticity and high-speed photography is then presented. The results are analysed to establish a generalised relationship between the crack velocity and the dynamic mode-I stress intensity factor (SIF). This relationship is found to be unique and is distinctly different from that previously established for the matrix material (polyester). Finally, an innovative experimental procedure is used to demonstrate the necessity of employing a fully transient stress-field representation in the analysis of optical data for an accurate prediction of the dynamic SIF history.     

稀疏气泡流动的粒子跟踪测速技术研究

采用动态阈值技术实现了对气泡图像的正确分割，利用灰度加权方法提高了气泡颗粒的定位精度。根据稀疏气泡流动图像的特点，提出了一种新的基于相关的粒子跟踪测速算法（2-HPTV）。通过进行两时刻中围绕待研究气泡所取的两个小的诊断窗口的相关运算，成功实现了气泡颗粒的轨迹追踪。实验表明本文算法较传统的PIV技术在测速精度上有很大程度的提高，与4帧粒子跟踪测速算法相比，降低了对摄像机帧频的要求，具有较强的实用性。     

Development and simulation studies of an unsteady state biofilter model for the treatment of cyclic air emissions of an α‐pinene gas stream

This paper describes the development and simulation of an unsteady state biofilter model used to predict dynamic behaviour of cyclically‐operated biofilters and compares it with experimental results obtained from three, parallel, bench‐scale biofilters treating both periodically fluctuating concentrations and constant concentrations of an α‐pinene‐laden gas stream. The dynamic model, using kinetic parameters estimated from the constant concentration biofilter, was able to predict the performance of cyclic biofilters operating at short cycle periods (ie, in the order of minutes and hours). Steady state kinetic data from a constant concentration biofilter can be used to predict unsteady state biofilter operation. At a 24 h cycle period, the dynamic model compared well with experimental results. For long cycle periods (ie, hours and days), removal efficiency decreased after periods of non‐loading: the longer the period of non‐loading, the poorer the biofilter's performance at the re‐commencement of pollutant loading. At longer time scales the model did not effectively predict transient behaviour, as adsorption and changes in kinetic parameters were not accounted for. Modelling results showed that similar biofiltration performance for the cyclic and constant concentration biofiltration of α‐pinene is expected for biofilters operating solely in the first order kinetics regime. Poorer performance for cyclic biofilters following Monod kinetics spanning the entire kinetics range is expected as the cycle amplitude increases. The most important parameters affecting the performance of a cyclically‐operated biofilter with short cycle periods are: amplitude of cyclic fluctuations, C_{g, max}/C_g, relative value of the half‐saturation constant in the Monod expression, K_s, and effective diffusivity of α‐pinene in the biofilm, D_e. Copyright © 2005 Society of Chemical Industry     

Displacement Discontinuity Method for Fracture Mechanics Analysis of Reissner Plates: Static and Dynamic

This paper is concerned with the displacement discontinuity method applied to the shear deformable plates (Reissner’s and Mindlin’s theories) with cracks subjected to static and dynamic loads. Fundamental solutions of dislocation are derived using the Fourier transform method and the Laplace transformation technique. Boundary integral equations are presented in terms of rotations/displacement on the crack surfaces. The Chebyshev polynomials of the second kind are used to evaluate the integral equations with hypersingular kernels on the crack boundaries and determine the stress intensity factors at the crack tips. Comparisons are made with other numerical solutions to demonstrate the proposed method is accurate both for static and dynamic problems.     

高压注水管柱受力分析

进行高压注水管柱受力分析的目的就是根据注水条件研究注水管柱在不同过程中的各类效应，以及这些效应对管柱产生的受力和变形规律，从而明确注水管柱的工作状态，保障注水管柱有效合理地工作。较详细地分析了高压注水管柱在锚定、坐封以及注水3个过程中的受力状态和变形情况，并分析了高压注水管柱在不同过程中受到的各种效应的影响，推导出注水管柱在不同过程中的应力及变形的计算公式，并给出了算例。     

Fast dynamic casting

We describe a scheme for implementing dynamic casts suitable for systems where the performance and predictability of performance is essential. A dynamic cast from a base class to a derived class in an object‐oriented language can be performed quickly by having the linker assign an integer type ID to each class. A simple integer arithmetic operation verifies whether the cast is legal at run time. The type ID scheme presented uses the modulo function to check that one class derives from another. A 64‐bit type ID is sufficient to handle class hierarchies of large size at least nine levels of derivation deep. We also discuss the pointer adjustments required for a C++ dynamic_cast. All examples will be drawn from the C++ language. Copyright © 2005 John Wiley & Sons, Ltd.     

高层建筑结构设计特点与剪力墙设计

围绕高层建筑结构，总结了高层建筑结构设计的特点，提出了剪力墙设计的几个问题，以及高层建筑结构分析和各种体系相对应的方法。     

谐振式力传感器敏感结构的研究

利用材料力学及弹性力学法，对石英晶体谐振式力传感器的悬臂梁结构进行了研究，得出了双梁单岛及三梁单岛悬臂梁结构的力转移系数，在与实验结果进行了比较后证明，支承结构的理论推导与实验结果一致。