Poly(vinyl pyrrolidone)—C70 complexes in aqueous solutions

Aqueous solutions of poly(vinyl pyrrolidone)-fullerene complexes (PVP-C₇₀) have been studied using static and dynamic light scattering methods. Two diffusive processes were detected. The slow diffusion was interpreted as dynamics of large intermolecular PVP-C₇₀ complexes while the fast diffusion was associated with the presence of individual PVP molecules in solution. It was also shown that the molecular weights and dimensions of PVP-C₇₀ complexes are smaller than for PVP-C₆₀ by a factor of 2.5-3. In aqueous solutions of PVP-C₇₀ complex the depolarization and dissymmetry of scattered light were observed in contrast to PVP-C₆₀ solutions. It reveals the existence of anisotropic structures in PVP-C₇₀ solutions. Intermolecular interactions within PVP-C₇₀ complexes are weak and a hydrodynamic field can destroy complexes.     

论建立动态勘探目标评价体系的迫切必要性

从国际上通行的油气勘探评价工作重点,中国石油所面临的"已逐步进入一个不断在老区范围内开展精细勘探、在老区范围内开展新区块、新层系勘探以获得主要的储量增长"的新的勘探形势,现有地质研究中各专题研究与具体勘探目标评价脱节等多个方面,论述了在中国石油内部建立一套动态勘探目标评价体系的迫切必要性;并在此基础上阐述了一个完整的动态勘探目标评价体系应包括的主要内容;最后对该体系的建设进行了可行性分析。     

爆破震动作用下新浇基础混凝土的安全震动速度研究

针对新浇筑混凝土的爆破震动控制,设法利用爆破地震波(Rayleigh波)作用下的新浇筑基础混凝土受力状态的理论分析和动力有限元计算,确定的新浇筑混凝土中的震动速度及动拉应变分布,并结合不同龄期下新浇筑混凝土的允许极限拉应变,从理论上确定新浇筑基础混凝土的安全震动速度及主要影响因素.理论分析结果和计算实例表明,新浇筑基础混凝土的允许震动速度值随基岩对新浇筑混凝土的基础约束程度的提高和随混凝土强度的降低而降低,我国现行采用的新浇筑大体积混凝土基础面上的质点安全震动速度值具有较大的安全储备.     

动态矩阵控制在浆料浓度控制系统中的应用

针对PTA生产中浆料配制过程这一有纯滞后、大时间常数的非线性系统，进行系统的动态机理分析，与工作点附近的线性化，在此基础上设计DMC-PID串级加前馈控制方案。目前该系统在扬子石化化工厂PTA装置上已成功投运。     

生存能力技术及其实现案例研究

生存能力技术谋求增强系统在面临攻击、失效等灾难情况下仍能继续提供服务的能力。本文提出了以多样化分布式动态备份技术和主动漂移机制为手段，以被保护目标的机动性和隐蔽性为目的的生存能力技术模型。提出了多样化体系理论及其实现案例，基于该理论设计并实现了自适应TOM方法。最后通过模拟和测试探讨了生存能力的评价方法，并验证了本文的结果。     

目标RCS动态数据的分布特征研究

复杂目标在不同视向的RCS分布特征是不同的，传统模型对此都没有给出详细的结果。文中以某歼击机和直升机为对象，应用X^2。分布、对数正态分布和瑞利分布模型，以及Kolmogomv拟合优度检验方法，研究其RCS动态测量数据的统计分布特征，得到了在一定显著性水平下，两种目标在不同视向角下对三种模型的拟合效果，同时得到应用X^2。分布拟合时模型半自由度随视向角的分布情况。在显著性水平为0．05时，对于在较短时间内录得的复杂目标动态RCS数据，应用X^2分布可以取得较好的拟合效果。文中结果精确地描述了目标RCS的起伏特征，能够为目标回波的精确模拟与检测提供可靠的依据。     

300km/h高速铁路PC槽型梁动力试验研究

介绍北方交通大学与比利时鲁汶大学、布鲁塞尔自由大学、比利时铁路公司合作,在巴黎至布鲁塞尔之间高速铁路线上的Antoing大桥进行的二次高速铁路桥梁动力试验。试验桥梁由跨度50m的多跨预应力混凝土简支槽型梁构成,试验中列车速度达265-310km/h。通过现场试验和实验结果分析,得到了桥梁的频率、振型、阻尼等自振特性,以及桥梁在高速列车作用下的动挠度、梁和桥墩的横向和竖向加速度、橡胶支座的相对位移、梁体的动应变等动力响应特性。试验经验和测试结果对于充实高速铁路桥梁动力分析理论、改进数值分析模型、验证计算结果、提高高速铁路桥梁的动力设计水平、保证行车安全,具有重要的意义。     

A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements

 A three-dimensional dynamic program for the anaysis of large deformations in contact-penetration problems is developed using the finite element Lagrangian method with explicit time integration. By incorporating a tetrahedral element, which allows a single-point integration without a special hourglass control scheme, this program can be more effective to the present problem. The position code algorithm is used to search contact surface. Eroding surfaces are also considered. The defense node algorithm was slightly modified for the calculation of contact forces. A study of obliquity effects on metallic plate perforation and ricochet processes in thin plates impacted by a sphere was conducted. It is well simulated that on separation of two parts of the sphere, the portion still within the crater tends to perforate, while the portion in contact with the plate surface ricochets. This deformation pattern is observed in experiments, especially at high obliquities. A long rod that impacts an oblique steel plate at high impact velocity was also simulated in order to study the dynamics of the rod caused by the three dimensional asymmetric contact. The agreement between simulated and experimental results is quite good. Fracture phenomena occuring at high obliquity deserves further investigations. Received: 20 February 2002 / Accepted: 20 September 2002     

Analysis and simulations of vibrations of a beam with a slider

A model for vibrations of a beam with a slider is derived, analysed and numerically simulated. It describes a viscoelastic beam that is clamped at one end to a vibrating device, while the other end moves between two stops attached to a slider. The contact is described by the normal compliance or by the Signorini conditions. The existence of weak solutions is established using the theory of set-valued pseudomonotone operators. The model is discretized using fourth-order spatial discretization, the solutions are numerically simulated and their results presented. The dynamics of the vibrations are depicted and so are the noise characteristics of the system.     

一类连续模糊动态系统控制方法在Furuta摆中的应用

为了研究Furuta摆在倒立点附近的稳定控制问题，采用基于T-S模糊模型的一类连续模糊动态系统控制方法，首次进行Furuta摆的模糊状态空间建模，并采用模糊切换的思想，设计了Furuta摆在倒立点附近的稳定控制器，进而分析了系统稳定性。与已有的方法相比，该方法的优点是稳定区域大、调节时间短。数字仿真结果验证了方法的有效性。