Evaluation of the Effects of Developmental Trauma on Neurotransmitter Systems Using Functional Molecular Imaging

Early life stress (ELS) is strongly associated with psychiatric disorders such as anxiety, depression, and schizophrenia in adulthood. To date, biological, behavioral, and structural aspects of ELS have been studied extensively, but their functional effects remain unclear. Here, we examined NeuroPET studies of dopaminergic, glutamatergic, and serotonergic systems in ELS animal models. Maternal separation and restraint stress were used to generate single or complex developmental trauma. Body weights of animals exposed to single trauma were similar to those of control animals; however, animals exposed to complex trauma exhibited loss of body weight when compared to controls. In behavioral tests, the complex developmental trauma group exhibited a decrease in time spent in the open arm of the elevated plus-maze and an increase in immobility time in the forced swim test when compared to control animals. In NeuroPET studies, the complex trauma group displayed a reduction in brain uptake values when compared to single trauma and control groups. Of neurotransmitter systems analyzed, the rate of decrease in brain uptake was the highest in the serotonergic group. Collectively, our results indicate that developmental trauma events induce behavioral deficits, including anxiety- and depressive-like phenotypes and dysfunction in neurotransmitter systems.     

某1000 MW汽轮机组励磁系统实测建模过程浅析

该机组是上海汽轮发电机有限公司生产的1000 MW汽轮机组,励磁调节器是ABB公司生产的UNITROL-6800型数字励磁调节器。文章论述了该机组励磁系统参数测试结果,给出了电力系统稳定计算用励磁系统的模型和参数。     

The Potential Role of Small-Molecule PERK Inhibitor LDN-0060609 in Primary Open-Angle Glaucoma Treatment

Primary open-angle glaucoma (POAG) constitutes the most common type of glaucoma. Emerging evidence suggests that Endoplasmic Reticulum (ER) stress and the protein kinase RNA-like endoplasmic reticulum kinase (PERK)-mediated Unfolded Protein Response (UPR) signaling pathway play a key role in POAG pathogenesis. Thus, the main aim of the study was to evaluate the effectiveness of the PERK inhibitor LDN-0060609 in cellular model of glaucoma using primary human trabecular meshwork (HTM) cells. To evaluate the level of the ER stress marker proteins, Western blotting and TaqMan gene expression assay were used. The cytotoxicity was measured by XTT, LDH assays and Giemsa staining, whereas genotoxicity via comet assay. Changes in cell morphology were assessed by phase-contrast microscopy. Analysis of apoptosis was performed by caspase-3 assay and flow cytometry (FC), whereas cell cycle progression by FC. The results obtained have demonstrated that LDN-0060609 triggered a significant decrease of ER stress marker proteins within HTM cells with induced ER stress conditions. Moreover, LDN-0060609 effectively increased viability, reduced DNA damage, increased proliferation, restored normal morphology, reduced apoptosis and restored normal cell cycle distribution of HTM cells with induced ER stress conditions. Thereby, PERK inhibitors, such as LDN-0060609, may provide an innovative, ground-breaking treatment strategy against POAG.     

In Vivo Analysis of the Biocompatibility and Bone Healing Capacity of a Novel Bone Grafting Material Combined with Hyaluronic Acid

The present in vivo study analyses both the inflammatory tissue reactions and the bone healing capacity of a newly developed bone substitute material (BSM) based on xenogeneic bone substitute granules combined with hyaluronate (HY) as a water-binding molecule. The results of the hyaluronate containing bone substitute material (BSM) were compared to a control xenogeneic BSM of the same chemical composition and a sham operation group up to 16 weeks post implantationem. A major focus of the study was to analyze the residual hyaluronate and its effects on the material-dependent healing behavior and the inflammatory tissue responses. The study included 63 male Wistar rats using the calvaria implantation model for 2, 8, and 16 weeks post implantationem. Established and Good Laboratory Practice (GLP)-conforming histological, histopathological, and histomorphometrical analysis methods were conducted. The results showed that the new hyaluronate containing BSM was gradually integrated within newly formed bone up to the end of the study that ended in a condition of complete bone defect healing. Thereby, no differences to the healing capacity of the control BSM were found. However, the bone formation in both groups was continuously significantly higher compared to the sham operation group. Additionally, no differences in the (inflammatory) tissue response that was analyzed via qualitative and (semi-) quantitative methods were found. Interestingly, no differences were found between the numbers of pro- and anti-inflammatory macrophages between the three study groups over the entire course of the study. No signs of the HY as a water-binding part of the BSM were histologically detectable at any of the study time points, altogether the results of the present study show that HY allows for an optimal material-associated bone tissue healing comparable to the control xenogeneic BSM. The added HY seems to be degraded within a very short time period of less than 2 weeks so that the remaining BSM granules allow for a gradual osteoconductive bone regeneration. Additionally, no differences between the inflammatory tissue reactions in both material groups and the sham operation group were found. Thus, the new hyaluronate containing xenogeneic BSM and also the control BSM have been shown to be fully biocompatible without any differences regarding bone regeneration.     

Multidisciplinary optimization of gas-quenching process

Distortion as a result of the quenching process is predominantly due to the thermal gradient and phase transformations within the component. Compared with traditional liquid quenching, the thermal boundary conditions during gas quenching are relatively simple to control. By adjusting the gas-quenching furnace pressure, the flow speed, or the spray nozzle configuration, the heat-transfer coefficients can be designed in terms of both the component geometry and the quenching time. The purpose of this research is to apply the optimization methodology to design the gas-quenching process. The design objective is to minimize the distortion caused by quenching. Constraints on the average surface hardness, and its distribution and residual stress are imposed. The heat-transfer coefficients are used as design variables. DEFORM-HT is used to predict material response during quenching. The response surface method is used to obtain the analytical models of the objective function and constraints in terms of the design variables. Once the response surfaces of the objective and constraints are obtained, they are used to search for the optimum heat-transfer coefficients. This process is then used instead of the finite-element analysis. A one-gear blank case study is used to demonstrate the optimization scheme.     

An experimental evaluation of the effects of ripple current generated by the power conditioning stage on a proton exchange membrane fuel cell stack

In this article, an impedance model of the proton exchange membrane fuel cell stack (PEMFCS) is proposed. The proposed study employs an equivalent circuit of the PEMFCS derived by the frequency response analysis technique. An equivalent circuit for the PEMFCS is developed to evaluate the effects of ripple currents generated by the power-conditioning unit. The calculated results are then verified by means of experiments using a commercially available PEMFCS. The relationship between ripple current and fuel cell performance, such as power loss and fuel consumption, is investigated. Experimental results show that the ripple current can contribute up to a 6% reduction in the available output power. This paper was presented at the Fuel Cells: Materials, Processing, and Manufacturing Technologies Symposium sponsored by the Energy/Utilities Industrial Sector & Ground Transportation Industrial Sector and the Specialty Materials Critical Technologies Sector at the ASM International Materials Solutions Conference, October 13–15, 2003, in Pittsburgh, PA. The symposium was organized by P. Singh, Pacific Northwest National Laboratory, S.C. Deevi, Philip Morris USA, T. Armstrong, Oak Ridge National Laboratory, and T. Dubois, U.S. Army CECOM.     

有滞后环节的系统的闭环鲁棒辨识方法

提出一种新的针对带滞后环节的任意阶系统的闭环辨识方法。通过“三步法”，实现在闭环条件下的被控制对象的传递函数参数的辨识，所提出方法具有很强的鲁棒性。仿真例子表明该方法的有效性。     

Quantification of response time in poly(vinyl alcohol)–metal complex thermochromic polymeric systems

Thermochromic poly(vinyl alcohol) (PVA)‐based material was synthesized and an extensive study of its thermochromic behavior with respect to response time was carried out. It was observed that it is possible to manipulate the response time by keeping control over chemical and physical parameters. The response time, which is the most important property of a smart material, has in this case been found to be very much influenced by rate of heat transfer into the material. Different compositions of the thermochromic material and their corresponding response time with respect to rate of heat transfer were studied and correlated. First, a theoretical equation was derived and later on it was experimentally verified to quantify the response time in PVA–metal complex‐based thermochromic systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4832–4834, 2006     

多表位DNA壳聚糖微球疫苗的体液免疫应答

目的研究多表位DNA壳聚糖微球疫苗的体液免疫应答。方法制备多表位DNA壳聚糖微球疫苗pcD-NA3.1-HME-3C3d,经鼻腔免疫小鼠,蛋白检测微孔试剂盒检测小鼠特异性IgG抗体水平。结果经免疫的小鼠均能产生针对各表位的特异性IgG抗体,DNA壳聚糖微球疫苗的抗体水平明显高于DNA疫苗。结论壳聚糖微球疫苗投递系统可提高多表位DNA疫苗的免疫应答效果。