棉型服装面料服用性能测试分析

通过使用悬垂仪、耐磨仪、撕裂仪、透气仪以及折皱弹性仪对棉及棉型织物的各主要服用性能指标进行测试，采用灰色关联的方法分析织物的悬垂性能、透气性能、折皱弹性性能、撕裂性能、耐磨性能等服用性能与主要影响因素(织物的规格，结构)之间的关联程度，分析最终对纺织品面料外观、舒适性、耐用性和保养性的影响。     

Direct current bias applied to hot flame diamond deposition produces smooth low friction coatings

As-deposited diamond coatings generally have a high surface roughness which results in a high friction coefficient and extensive wear of the counter material in sliding contact. Therefore several methods for smoothening diamond coatings have been proposed, such as laser polishing, molten metal etching, thermochemical polishing and mechanical polishing. All these methods have some disadvantage e.g. long processing time or high processing temperature. Furthermore, they are all post-deposition treatments i.e. the manufacture of these coatings requires at least two processing steps, deposition and smoothening. With the present method which combines d.c. bias with hot flame diamond deposition, a smooth diamond surface is produced during the actual growth of the film. No post-deposition treatment is necessary. The surface roughness is not dependent on the coating thickness which means that thick coatings with smooth surface can be produced. In fact, the method has a smoothening effect, i.e. rough surfaces can be made smooth. The method is comparable to conventional hot flame deposition of diamond as to growth rate and cost of producing the coatings. The coatings have a nano-crystalline structure and a surface roughness of Ra = 25 nm, and result in a friction coefficient of 0.1 or less in dry sliding and about 0.05 in water-lubricated sliding against cemented carbide. Their wear resistance is virtually the same as that of conventional diamond films.     

基于弹性需求的城市间客车开行频率与票价优化

基于两城市间旅客出行弹性需求,研究了客运企业客车开行频率与票价的组合决策优化问题。在综合考虑旅客出行时间调整费用、车内拥挤费用、票价支出以及客运企业运营的固定成本、可变成本、线路的建设维护分摊费用、车票收入的基础上,以旅客和客运企业的系统净收益为目标函数建立了优化模型和求解方法,并就一组特殊旅客出行时间调整费用函数进行了深入讨论和数值计算分析。研究结果为客运企业客车开行频率和票价的组合决策提供了理论依据。     

紫外光固化聚合物涂层的原位光稳定化研究

选用实验室制备的四种新型反应型受阻胺类光稳定剂(r-HALS):4-甲基丙烯酰氧基-2,2,6,6-四甲基哌啶醇酯(MTMP)、4-丙烯酰氧基-2,2,6,6-四甲基哌啶醇酯(ATMP)、4-甲基丙烯酰氧基-1,2,2,6,6-五甲基哌啶醇酯(MPMP)和4-丙烯酰氧基-1,2,2,6,6-五甲基哌啶醇酯(APMP),实现了紫外光固化聚合物涂层(膜)的原位(in situ)光稳定化。通过室内人工光老化实验和在光氧化过程中黄度指数(Yellowness Index,YI)的监测,再与典型的商用HALS(Tinuvin770和Tinuvin292)进行平行实验对比,考察了r-HALS对紫外光固化聚合物涂层的光防护效果,探索一条紫外光固化聚合物涂层原位(in situ)光稳定化的新途径。     

Relations between compliances of inhomogeneities having the same shape but different elastic constants

The contributions of inhomogeneities having the same shape but different elastic constants, to the overall elastic properties are interrelated. The utility of these relations lies, in particular, in the possibility to extend available results for pores or rigid inclusions to inhomogeneities of arbitrary elastic properties. The relations are exact for ellipsoids and approximate for non-ellipsoidal shapes. The constructed approximation also constitutes approximate connection between the first Eshelby’s problem (the eigenstrain problem) and the second one (the inhomogeneity problem), for non-ellipsoidal shapes. It also yields approximate formulas for the contribution of a non-ellipsoidal inhomogeneity to effective elastic properties.     

复合材料网格结构模态分析的均匀化等效建模

复合材料网格结构由于内部结构复杂 , 在有限元分析中难以建立实际模型 , 需要对结构采用均匀化方法进行弹性常数等效。本文中根据结构的最小势能原理和有限元法基本思想 , 对结构的弹性力学基本方程进行了推导 , 使用有限单元法中的位移场 , 根据应变能相等的原则 , 得出了求解等效弹性矩阵的一种比较通用的方法 ;根据动能相等的原则 , 得出了等效质量的求解公式。采用有限元方法 , 对胞元进行了拉伸和剪切载荷下的细观力学分析 , 将分析结果代入到推导的公式 , 求出了复合材料网格结构的等效特性参数 ; 使用求得的等效模型对结构进行了宏观仿真 , 并与实际模型仿真结果进行对比。研究结果表明 , 该等效方法具有较好的精度 , 能够满足工程的需要 , 可用于各类大型结构的分析。      

初始几何缺陷对非强支撑钢框架柱性能的影响

在钢框架二阶弹性分析中,结构整体初始几何缺陷和构件的初始几何缺陷是实际存在的,其影响不应忽略。基于由单根柱和梁组成的框架子结构模型,通过引入以上两种几何缺陷,得出了考虑初始几何缺陷影响的框架柱位移与内力的理论公式。利用该理论模型,可以较准确地分析框架结构整体几何缺陷与构件几何缺陷对二阶弹性弯矩的影响。参数分析结果表明:对于钢框架柱,结构的整体几何缺陷和构件几何缺陷对弯矩的影响均可以等效为作用于楼层处的假想水平力,而假想水平力的大小与作用于该楼层的竖向荷载有关。     

超声电机定子的简化复合梁模型裂纹扩展分析与实验

超声电机工作环境非常复杂,压电陶瓷极易发生断裂失效。为了分析研究电场、预压力及裂纹位置对压电陶瓷断裂失效的影响,将超声电机的定子沿周向简化为弹性复合梁模型,并在压电陶瓷上预制贯穿裂纹。首先用Ansys有限元软件对简化模型进行仿真,分析得到增大电场、预压力能增加裂纹尖端应力值,裂纹更加容易扩展。然后通过实验验证得到增大电场强度裂纹更加容易扩展。     

Copper‐Free Clickable Coatings

The copper‐catalyzed azide–alkyne 1,3‐dipolar cycloaddition (CuAAC) is extensively used for the functionalization of well‐defined polymeric materials. However, the necessity for copper, which is inherently toxic, limits the potential applications of these materials in the area of biology and biomedicine. Therefore, the first entirely copper‐free procedure for the synthesis of clickable coatings for the immobilization of functional molecules is reported. In the first step, azide‐functional coatings are prepared by thermal crosslinking of side‐chain azide‐functional polymers and dialkyne linkers. In a second step, three copper‐free click reactions (i.e., the Staudinger ligation, the dibenzocyclooctyne‐based strain‐promoted azide–alkyne [3+2] cycloaddition, and the methyl‐oxanorbornadiene‐based tandem cycloaddition?retro‐Diels?Alder (crDA) reaction) are used to functionalize the azide‐containing surfaces with fluorescent probes, allowing qualitative comparison with the traditional CuAAC.     

激光-感应复合熔覆Ni基WC复合层的工艺研究

为了提高熔覆效率与消除熔覆层的裂纹,采用激光-感应复合熔覆的方法在A3表面获得了无气孔与裂纹的Ni基WC复合层。研究了不同的加工参量对复合层质量的影响,结果表明,随着激光比能的增加,粉末面密度增加;在相同的激光比能条件下,随着粉末面密度增加,熔覆层的高度增加,稀释率减小;在相同的粉末面密度条件下,随着激光比能的增加,熔覆层的宽度略有增加。此外,相对于单纯的激光熔覆技术,激光-感应复合熔覆的效率约可以提高5倍。在激光-感应复合熔覆过程中,熔覆层与基材间的温度梯度大大降低,这是Ni基WC复合层无裂纹的关键原因。