A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Effect of 3D lip deformations on elastohydrodynamic lip seals behaviour

The numerical simulation of comparative elastohydrodynamic lubrication between axisymmetrical and 3D elastic approaches on the radial lip seals is presented in order to determine the 3D effect of the elastic aspect of the seal lip. Indeed, the consideration of 3D model in other words the circumferential variation of the lip elastic deformation indicated a difference in the deformation distribution of the lip compared to the axisymmetrical approach. Consequently, the results show that the presence of the circumferential variation of the seal lip deformation has a significant effect on the pumping rate values.     

Semi—IPN复合材料的弹性性能和内耗的超声测定

本文用超声浸液法测量了单向纤维增强热塑性树脂及其半互穿聚合物网络(Semi-IPN)复合材料的杨氏模量、剪切模量、泊松比和内耗,并对不同树脂、纤维和Semi-IPN中共混组成比对弹性性能的影响进行了研究。     

Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers

Zinc dust and manganese powder as pigments were incorporated in epoxy-polyamide and butyl titanate medium, with different pigment volume concentration (PVC) ranging from 20 to 74. These protective coatings were coated on sand blasted mild steel substrates and immersed in 3 wt.% sodium chloride solution and the corrosion current was measured by the Tafel extrapolation method. From the corrosion current produced by these primers, the optimum level of the pigments in these binders was identified. Thus the protective performance of optimised primers was evaluated on a sand blasted mild steel surface by the Tafel polarisation method in 3 wt.% sodium chloride solution, over different periods of time. The results were found to be comparable with the salt spray test and galvanic current measurements. The manganese powder used for this investigation showed that it could be used as an alternative to zinc powder for metal rich primers.     

弹性直杆热膨胀状态下的非线性振动

以ＫＢＭ法为基础，引进谐波平衡观点来研究弹性直杆热膨胀状态下的非线性振动．通过实例计算表明，弹性直杆热膨胀状态下非线性振动的频率对温度的变化非常敏感．     

泡沫沥青混合料动态性能研究

为更好地模拟泡沫沥青混合料在车辆动载作用下的动态性能，便于与国外相关研究进行比较，采用劈裂法对混合料动态性能进行研究。通过试验研究骨料类型、级配、水泥用量等对泡沫沥青混合料动态回弹模量的影响，总结了泡沫沥青混合料动静模量的关系。     

化学镀Ni-P-PTFE复合镀层的性能

本文对化学镀ＮｉＰＰＴＦＥ复合镀层的性能作了测定和评价。实验表明，用优化的镀液配方和工艺可获得含ＰＴＦＥ粒子２５～３０％ｖｏｌ的ＮｉＰＰＴＦＥ复合镀层。这种镀层具有优良的结合力和良好的耐蚀性，其硬度随ＰＴＦＥ含量增加而降低，其特别突出的性能是优异的减摩性和耐磨性，是一种具有自润滑功能的表面复合材料。     

铁铝酸盐复合膨胀水泥化学预应力机理及其应用研究

本文阐述铁铝酸盐自应力混凝土的主要物理力学特征.研究了限制膨胀应变与配筋率之间的定量函数关系.通过正交试验和方差分析,确定了复合外加剂对其性能的影响.针对其在自应力管中的应用,提出多层中空圆柱理论计算模型,按弹性理论计算出自应力管初始应力分布规律.对比以前的线性理论计算误差,给出相应的修正系数.本文对类似的自应力混凝土,具有普遍的指导意义.     

Void formation and growth in a class of compressible solids

A new class of compressible elastic solids, which includes the Blatz-Ko material as a special case, is proposed. A closed-form solution is constructed and studied for a bifurcation problem modeling void formation in this class of compressible elastic solids. The relation between the void-formation condition and the material parameters is obtained analytically. An energy comparison of the void-formation deformation and the homogeneous expansion deformation is carried out.     

大型活塞式压缩机弹性隔振基础的设计及安装

大型活塞式压缩机基础转速较低,传统上采用固定大块体结构,不仅基础的体积和重量都很大,而且动力计算模型也比较复杂,设计参数具有不确定性。而弹簧隔振基础结构边界条件简单清晰,解除了设备、基础块与下部结构的刚性动态耦合,受力明确,构造简单,可靠性和准确度高;隔振效率高达80%以上,能大大降低设备本身和对下部结构的动力作用。文章结合胜利油田油气集输总厂一工程实例,从结构型式、隔振原理、物理参数、动力分析几方面介绍了弹性隔振基础的设计,并简要介绍了弹性隔振基础的安装要点。