桩土物理模型及结构—桩—土相互作用

本文将工程中常用的密集打桩土体模拟为正交各向异性弹性体。建立了刚性基础-桩-土这一空间相互作用系统的模型。根据圆柱体柱坐标的极点条件。分别选取了两组位移函数来表征桩基和土的位移,并用子区间法分析了结构-桩-土系统的相互作用地震反应。     

Advanced Coatings on Furnace Wall Tubes

Nickel-based self-fluxing alloy coating extends the service life of furnace wall tubes at waste incineration plants due to its excellent corrosion resistance and heat resistance. Fusing of such coatings by induction heating offers improved efficiency and reliability of products. Compared with conventional plasma, flame, and high-velocity oxy-fuel spraying thermal-sprayed coatings, induction-fused coatings provide a far stronger metallurgical bond at the interface, while minimizing the inclusion of pores. In addition, the tubes are less costly than those with welded coatings, and the process reduces the distortion of the products, facilitating easier final assembly. A successful experimental application of 11 units in a waste incinerator revealed virtually no corrosion on the exposed surfaces, and showed an improved water heating efficiency over that of the original tubes. Such units are now being employed in four incinerators in Taiwan, and continuing tests are showing great promise.     

Evaluation of different coating systems by electrochemical methods

Corrosion protection of organic coated steel is determined by free corrosion potential measurements and impedance spectroscopy. The results are classified by means of very basic considerations and evaluation figures are developed. These electrochemical data are correlated with the extent of the corrosion for each coating system. The evaluation figures are used for ranking coating systems and this ranking is correlated with the ranking with reference to the results of standardized and exposure tests.     

Prediction of the elastic behaviour of hybrid and non-hybrid woven composites

A micromechanical model called MESOTEX is presented for prediction of the elastic behaviour of composites reinforced with non-hybrid weave (plain weave, satin weave and twill weave) and hybrid weave (hybrid plain weave and hybrid twill weave) fabrics. By using the classical thin laminate theory applied to each woven structure, this analytical model takes into account the strand undulations in the two directions and also integrates the geometrical and mechanical parameters of each constituent (resin, fill and warp strands). A representative volume is chosen for each woven composite and the fibre architecture is described by several functions. To determine the effectiveness of this analysis, the elastic properties predicted for each woven composite are compared with experimental results and results extracted from the literature. This correlation shows excellent agreement between measured and predicted values, with a very low calculation cost (CPU time of less than 0·01 s).     

Robust pole assignment for incomplete nonlinear decoupling applied to robots

A robustness analysis and synthesis for incomplete nonlinear decoupling for a class of nonlinear systems is discussed. Rigid and elastic-joint robot models belong to this class. For the elastic case, a transformation facilitates the robustness analysis under a weak assumption. Charts with H ₁- and H - norms of closed-loop disturbance transfer functions of the nonlinear-decoupled system are presented for a robust pole assignment.     

保持几何特征的自适应弹性二次曲线模型

物体形状特征的准确提取往往受到图像获取、目标分割等过程中各种因素的影响,因而需要构造一种鲁棒的形状表现来保有其本质特征。揭示弹性二次曲线(EQW)模型中能量权重因子和样条重叠度因子与形状几何特性间的关系,提出一种自适应保持几何特征的EQW形状表现模型,并将该模型与交互式Live Wire算法相结合,应用至图像分割中,对于各种模态图像中的目标进行分割实验。直观上,本文方法能够在去除噪声同时较好地保持目标形状的显著特征;量化结果方面,交互式分割误差保持在较小稳定范围内,引入EQW模型带来的时间开销亦在可接受范围内。     

Preparation of micro-arc oxidation coatings on magnesium alloy and its thermal shock resistance property

1. Introduction Due to their high specific strength, good electro-magnetic shielding characteristics, high damping characteristics, good cast ability, and excellent pol-ishing capability, magnesium alloys are extensively used in aeronautical, automobile, and electro- communication industries [1-3]. But magnesium has some disadvantages, such as low chemical stability, high negative electric potential, and low hardness, so it is necessary to use surface disposal to accommo-date the demand for re…     

用微量元素涂料改善球铁件热节组织的试验研究

对RE、Tc、Bi、Sb等微量元素以涂料形式对球铁件厚大热节部位进行微合金化,以改善其组织的可能性进行了试验研究,结果表明:多元微量元素涂料可有效地消除碎块状石墨,提高球化率,改善球铁组织,涂料层厚度影响微合金化程度而应严格控制,该工艺具有简便。无炉料污染、可代替冷铁以确保复杂铸件组织均一等优点。     

电流密度对声电沉积生物活性透钙磷石涂层结构和形貌的影响

通过声电沉积工艺在碳／碳复合材料表面制备了生物活性透钙磷石涂层，采用SEM、FFIR、XRD研究了超声场中电流密度对涂层组成结构和形貌的影响。发现在一定工艺条件下，随电流密度增加，涂层的平均晶粒尺寸减小，致密度增加；当电流密度小于l0mA／cm^2时涂层形貌为片状，l0mA／cm^2-26mA／cm^2时为粒状，32mA／cm^2时为花菜心状。且涂层中透钙磷石晶体的择优取向也发生变化，择优晶面依次为(021)、(111)、(220)。同时还讨论了涂层微观结构变化机理。